1. Prodotto finitoview
The Ergosolid H100 is a professional gas spring desk mount designed to enhance your workspace ergonomics. It supports single LCD, TFT, or LED screens ranging from 22 to 35 inches, with a weight capacity of 2 to 12 kg. This mount features a 360-degree pivot function, tilt, and rotation capabilities, allowing for smooth and precise adjustments to achieve your ideal viewing angle. It is compatible with VESA mounting patterns of 75x75mm and 100x100mm. The integrated cable management system helps maintain a tidy and organized desk.
Image 1.1: Ergosolid H100 Gas Spring Desk Mount with a monitor.
2. Cosa c'è nella scatola
Prima di iniziare l'installazione, assicurarsi che tutti i componenti siano presenti:
- Monitor holder (main arm assembly)
- Set of screws (for VESA mounting and desk attachment)
- Istruzioni per l'installazione
- Allen keys for adjustments
3. Configurazione e installazione
The Ergosolid H100 offers two primary installation methods: desk clamp e montaggio tramite occhiello. Scegli il metodo più adatto alla tua scrivania.
3.1. Controllo di compatibilità VESA
Before installation, verify your monitor's VESA compatibility and weight. This mount supports VESA patterns of 75x75mm and 100x100mm, and monitors weighing between 2 kg and 12 kg.
Image 3.1: VESA mounting pattern compatibility.
3.2. Scrivania Clamp Installazione
- Fissare la scrivania clamp base to the main pole using the provided screws.
- Posizionare il clamp on the edge of your desk (desk thickness 25-80 mm).
- Stringere la clamp avvitare fino a quando il supporto non è fissato saldamente alla scrivania.
3.3. Installazione del supporto passacavo
- If your desk has a grommet hole, or if you plan to drill one, attach the grommet base to the main pole.
- Insert the pole through the grommet hole.
- Secure the mount from underneath the desk using the provided plate and screw.
Image 3.2: Desk clamp e opzioni di montaggio tramite passacavo.
3.4. Fissaggio del monitor
- Carefully attach your monitor to the VESA plate on the arm using the appropriate screws.
- Ensure the screws are tightened securely but do not overtighten.
For a visual guide on installation and features, please refer to the official product video:
Video 3.1: Ergosolid H100 Product Overview and Installation Guide. This video demonstrates the assembly process and various adjustment capabilities of the monitor arm.
4. Istruzioni per l'uso
The Ergosolid H100 monitor arm provides extensive flexibility for positioning your screen.
4.1. Adjusting the Gas Spring Tension
The gas spring tension needs to be adjusted to match your monitor's weight. Use the provided Allen key to turn the adjustment screw on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at any desired height without drifting up or down.
4.2. Posizionamento del monitor
- Regolazione dell'altezza: Gently push or pull the monitor up or down to the desired height.
- Inclinazione: Tilt the monitor screen +85 degrees upwards or -30 degrees downwards to reduce glare and optimize viewangoli di inclinazione.
- Girevole: Swivel the monitor arm left or right up to 360 degrees around the pole. The VESA plate also allows 180-degree swivel.
- Rotazione (perno): Ruotare il monitor di 360 gradi per passare dall'orientamento orizzontale a quello verticale e viceversa.
- Estensione/Retrazione: Extend or retract the arm to bring the monitor closer or push it further away from you, with a maximum extension of 550 mm.
Image 4.1: Adjustment ranges for the Ergosolid H100 monitor arm.
4.3. Gestione dei cavi
Route your monitor and power cables through the integrated cable clips on the underside of the arm to keep your workspace neat and organized.
5. Manutenzione
To ensure the longevity and optimal performance of your Ergosolid H100 desk mount, follow these simple maintenance guidelines:
- Pulizia regolare: Pulisci il supporto con un panno morbido eamp panno per rimuovere polvere e sporco. Evitare detergenti abrasivi.
- Controllare le connessioni: Controllare periodicamente tutte le viti e i bulloni per assicurarsi che siano ben serrati. Serrare nuovamente se necessario, ma senza esagerare.
- Regolazione della molla a gas: If your monitor's weight changes, or if the arm starts to drift, re-adjust the gas spring tension as described in Section 4.1.
6. Risoluzione Dei Problemi
- Monitor drifts up or down: The gas spring tension is not correctly adjusted for your monitor's weight. Refer to Section 4.1 to adjust the tension.
- Monitor is wobbly: Ensure all mounting screws (both to the desk and to the monitor) are securely tightened. Check that the desk clamp or grommet mount is firmly attached to the desk.
- Difficulty moving the arm: Check if any adjustment points are overly tightened. Loosen slightly if necessary. If the gas spring is too tight or too loose, adjust it according to Section 4.1.
- Cables are not tidy: Ensure all cables are routed through the designated cable management clips on the arm.
7. Specifiche
| Marca | Ergosolid |
| Numero di modello | H100 |
| Colore | Nero |
| Dispositivi compatibili | Monitor |
| Compatibilità delle dimensioni dello schermo | 22 - 35 pollici |
| Capacità di peso | 2 - 12 kg |
| Compatibilità VESA | 75x75 mm, 100x100 mm |
| Tipo di montaggio | Scrivania Clamp (25-80 mm thickness), Grommet Mount |
| Tipo di movimento | Pivot, Swivel, Tilt, Rotation |
| Angolo di inclinazione massimo | +85 / -30 degrees |
| Rotazione | 360 gradi |
| Materiale | Metal or solid plastic joint |
8. Garanzia e supporto
The Ergosolid H100 desk mount comes with a Garanzia del produttore di 2 anni. For any support inquiries, technical assistance, or warranty claims, please contact Ergosolid customer service through their official channels or the retailer where the product was purchased. Please retain your proof of purchase for warranty validation.
