HORI 3D Surround Gaming Neckset Instruction Manual

1. Introduzione

The HORI 3D Surround Gaming Neckset is a wearable audio device designed to enhance your gaming experience on PlayStation 5, PlayStation 4, and PC. It provides immersive virtual surround sound and features for clear communication during gameplay. This manual will guide you through the setup, operation, and maintenance of your neckset.

Figure 1: HORI 3D Surround Gaming Neckset (Model SPF-009U)

Caratteristiche principali:

• Immersive virtual 3D Surround sound.
• Two selectable gaming sound modes: Bass Boost Mode and FPS Mode.
• Wearable neckset design for comfortable audio and voice chat.
• Connects directly to PS5, PS4, and PC controllers with an included audio cable.
• Echo cancellation feature for clear voice chat.

2. Impostazione

2.1 Disimballaggio e componenti

Rimuovere con attenzione tutti gli articoli dall'imballaggio. Assicurarsi che siano presenti i seguenti componenti:

• HORI 3D Surround Gaming Neckset
• Cavo di ricarica USB-C
• Cavo audio da 3.5 mm
• Manuale dell'utente (questo documento)

2.2 Charging the Neckset

Before initial use, fully charge the neckset. Connect the included USB-C charging cable to the neckset's charging port and to a compatible USB power source (e.g., console, PC, or USB wall adapter). The charging indicator light will show the charging status.

2.3 Connessione al dispositivo

The neckset connects via a wired connection to your gaming controller or device.

1. Ensure the neckset is sufficiently charged.
2. Plug one end of the included 3.5mm audio cable into the audio input port on the neckset.
3. Plug the other end of the 3.5mm audio cable into the headphone jack of your PlayStation 5 DualSense Wireless Controller, PlayStation 4 DUALSHOCK 4 Wireless Controller, or PC audio output.
4. Power on your console or PC and the neckset.

Figure 2: Neckset connected to a game controller.

3. Istruzioni per l'uso

3.1 Wearing the Neckset

Place the neckset comfortably around your neck, ensuring the speakers are positioned near your ears for optimal sound projection. The lightweight design allows for extended gaming sessions.

Figure 3: Proper wearing of the neckset during gameplay.

3.2 Accensione/spegnimento

Locate the power button on the neckset. Press and hold to power on or off the device. An indicator light will confirm the power status.

3.3 Controllo del volume

Adjust the volume using the dedicated volume buttons located on the side of the neckset. Press the '+' button to increase volume and the '-' button to decrease volume.

Figure 4: Easy-to-access control buttons for volume and modes.

3.4 modalità audio

The neckset features two distinct sound modes for different gaming scenarios:

• Modalità Bass Boost: Provides rich and balanced game audio, ideal for immersive experiences.
• Modalità FPS: Enhances subtle sounds like footsteps and distant gunfire, giving a competitive edge in first-person shooter games.

Switch between these modes using the dedicated mode button on the neckset.

Figura 5: Pulsanti di selezione della modalità.

3.5 Microphone and Echo Cancellation

The integrated microphone allows for clear voice chat with teammates. The echo cancellation feature minimizes game audio interference, ensuring your voice is transmitted clearly without feedback.

To mute the microphone, press the dedicated mute button on the neckset. An indicator light will typically show when the microphone is muted.

Figure 6: Communicating with others while wearing the neckset.

3.6 Video ufficiale del prodotto

4. Manutenzione

4.1 Pulizia

To clean the neckset, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surface or internal components. Avoid getting moisture into any openings.

4.2 Conservazione

When not in use, store the neckset in a cool, dry place away from direct sunlight and extreme temperatures. Avoid placing heavy objects on the neckset to prevent damage.

4.3 Cura della batteria

The neckset contains a rechargeable Lithium Polymer battery. For optimal battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods. Do not attempt to replace the battery yourself.

5. Risoluzione Dei Problemi

5.1 Nessun suono o volume basso

• Ensure the neckset is powered on and fully charged.
• Check that the 3.5mm audio cable is securely connected to both the neckset and your controller/device.
• Increase the volume on both the neckset and your connected device/console.
• Verify that the audio output settings on your console or PC are configured correctly to use the connected neckset.

5.2 Il microfono non funziona

• Ensure the microphone is not muted on the neckset (check the mute indicator light).
• Check the microphone input settings on your console or PC to ensure the neckset is selected as the input device.
• Confirm that the game or application you are using has microphone access enabled.
• Test the microphone with another application or device if possible.

5.3 Il dispositivo non si accende

• Ensure the neckset is fully charged. Connect it to a power source using the USB-C cable and allow it to charge for at least 30 minutes before attempting to power it on again.
• Prova a utilizzare un cavo USB-C o un adattatore di alimentazione diverso per escludere problemi con il cavo/adattatore.

6. Specifiche

7. Informazioni sulla garanzia

Warranty information for the HORI 3D Surround Gaming Neckset is typically provided with the product packaging or can be found on the official HORI websito. Conservare la prova d'acquisto per eventuali reclami in garanzia.

8. Supporto

Per ulteriore assistenza, supporto tecnico o per view frequently asked questions, please visit the official HORI support websito:

Visita lo Store HORI su Amazon

You may also find contact information for customer service on the HORI websito.