Newskill Manticore Gaming PC Case User Manual

Introduzione

Thank you for choosing the Newskill Manticore Gaming PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC chassis. Please read these instructions carefully before beginning the assembly process to ensure optimal performance and longevity of your components.

Prodotto finitoview

The Newskill Manticore is an ATX mid-tower gaming PC case designed for high-performance builds. It features a mesh front panel for superior airflow, a tempered glass side panel to showcase your components, and four pre-installed 120mm ARGB fans for effective cooling and customizable aesthetics.

Figura 1: Fronte view of the Newskill Manticore Gaming PC Case, highlighting the mesh front and tempered glass side panel.

Caratteristiche principali:

• ATX Mid-Tower compatibility
• Mesh front panel for optimized airflow
• Pannello laterale in vetro temperato
• Four pre-installed 120mm ARGB fans
• Two removable dust filters
• USB 3.0 connectivity on the front panel

Configurazione e installazione

1. Disimballaggio

Carefully remove the PC case from its packaging. Inspect for any damage that may have occurred during shipping. Retain the packaging for future transport or warranty claims.

2. Identificazione dei componenti

Before installation, familiarize yourself with the case components and included accessories:

• Newskill Manticore PC Case
• Accessory box (screws, cable ties, standoffs)
• Manuale dell'utente (questo documento)

3. Installazione della scheda madre

1. Rimuovere il pannello laterale in vetro temperato svitando le viti a testa zigrinata.
2. Install the necessary motherboard standoffs into the motherboard tray.
3. Carefully place your ATX motherboard onto the standoffs, aligning the screw holes.
4. Fissare la scheda madre con le viti fornite.

4. Installazione dell'unità di alimentazione (PSU)

1. Individuare l'area di montaggio dell'alimentatore nella parte inferiore posteriore del case.
2. Slide your PSU into position from the rear of the case.
3. Secure the PSU with screws from the exterior rear of the case.

5. Installazione dell'unità di archiviazione

The case supports various storage configurations. Refer to your specific drive type for mounting instructions (e.g., 2.5" SSDs, 3.5" HDDs).

6. Installazione della scheda grafica e della scheda di espansione

Remove the necessary PCIe slot covers and install your graphics card or other expansion cards, securing them with screws.

7. Collegamenti del pannello frontale

Connect the front panel cables (USB 3.0, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to the corresponding headers on your motherboard. Consult your motherboard manual for exact pin layouts.

8. Gestione dei cavi

Utilizzate i fori per il passaggio dei cavi e i punti di fissaggio dietro il vassoio della scheda madre per gestire i cavi. Questo migliora il flusso d'aria e l'estetica.

Istruzioni per l'uso

Accensione/spegnimento

Press the power button located on the top panel of the case to turn on your system. To shut down, use the operating system's power-off function or press and hold the power button for several seconds for a forced shutdown (not recommended for regular use).

Controllo dell'illuminazione ARGB

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (if compatible) or a dedicated ARGB controller (if included or purchased separately). Refer to your motherboard or controller manual for specific instructions on changing lighting effects and colors.

Manutenzione

Pulizia del filtro antipolvere

The Newskill Manticore includes two removable dust filters (typically located on the top and bottom/front). Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside your PC. Gently slide them out, clean with water and mild soap, or use a vacuum cleaner, and ensure they are completely dry before re-inserting.

Pulizia esterna

Pulire le superfici esterne con un panno morbido, damp panno. Evitare detergenti abrasivi o solventi che potrebbero danneggiare la finitura o il vetro temperato.

Risoluzione dei problemi

Nessun potere

• Ensure the PSU is properly connected to the wall outlet and switched on.
• Verificare che tutti i cavi di alimentazione dell'alimentatore siano collegati correttamente alla scheda madre e ai componenti.
• Controllare i collegamenti dell'interruttore di alimentazione del pannello frontale alla scheda madre.

Le ventole non girano / L'ARGB non si accende

• Confirm fan power cables are securely connected to the motherboard or fan controller.
• Check ARGB connections to the motherboard's ARGB header or dedicated controller.
• Ensure ARGB software or controller settings are correctly configured.

Flusso d'aria scarso / surriscaldamento

• Pulire regolarmente i filtri antipolvere.
• Ensure no obstructions are blocking air intake or exhaust vents.
• Verify all fans are spinning correctly and oriented for optimal airflow.

For further assistance, please contact Newskill support.

Specifiche

Informazioni sulla garanzia

The Newskill Manticore PC Case comes with a Garanzia del produttore di 2 anni. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, modification, or unauthorized repair. Please retain your proof of purchase for warranty claims.

Supporto e contatti

For technical support, troubleshooting assistance, or warranty inquiries, please visit the official Newskill website or contact their customer service department. You can find contact information on the Newskill websito: www.newskillgaming.com