Manuale d'uso del tiralatte elettrico indossabile YOUHA

Introduzione

Thank you for choosing the YOUHA Wearable Electric Breast Pump. This innovative device is designed to provide a discreet, comfortable, and efficient breast milk expression experience. Its compact, hands-free design allows you to pump anywhere, anytime, without the hassle of tubes, wires, or dangling bottles. Please read this manual carefully before first use to ensure proper operation and maintenance.

Image: The YOUHA Wearable Electric Breast Pump, designed for discreet and hands-free use.

Caratteristiche del prodotto

• Wearable & Hands-Free: Small and lightweight, designed to fit inside your bra for ultimate convenience and discretion.
• Design tutto in uno: No tubes, wires, or dangling bottles, allowing you to pump anywhere, anytime.
• Modalità e livelli multipli: Features 3 distinct modes (Massage, Suction, Mixed) with 9 adjustable levels each, allowing you to customize your pumping experience for maximum comfort and efficiency.
• Funzionamento ultra silenzioso: Engineered with low noise technology (approx. 45-50 dB) to ensure a quiet environment for both mother and baby.
• Facile da pulire: Components (excluding the motor unit) are easy to assemble, disassemble, and can be cleaned and sterilized with boiling water or steam.
• BPA-Free & Safe: Made from food-grade, BPA-free materials for your safety and peace of mind.
• Batteria ricaricabile: Equipped with a built-in 1100mAh lithium battery, rechargeable via USB Type-C.

Image: Key features of the YOUHA breast pump, including portability, quiet operation, and hands-free design.

Image: Noise level comparison, demonstrating the quiet operation of the YOUHA breast pump (45-50dB).

Contenuto della confezione

Each set of the YOUHA Wearable Electric Breast Pump includes the following components:

• 1 x motore della pompa
• 1 x 240ml Collection Cup
• 1 x Silicone Breast Shield (Flange)
• 1 x Copertura
• 1 x Silicone Connector
• 2 x valvole a becco d'anatra
• 1 x Cavo USB di tipo C
• 1 x Manuale utente (inglese)

Installazione e assemblaggio

Before first use, please clean and sterilize all components that come into contact with breast milk. The motor unit should non be washed or sterilized.

1. Ensure all parts (silicone breast shield, silicone connector, duckbill valves, collection cup, and cover) are clean and dry.
2. Insert the duckbill valve firmly into the bottom of the silicone connector.
3. Attach the silicone breast shield to the silicone connector, ensuring a tight seal.
4. Connect the assembled silicone parts to the 240ml collection cup.
5. Place the pump motor securely on top of the collection cup, aligning it properly.
6. Ensure all connections are secure to prevent leaks and ensure optimal suction.

Immagine: Esploso view diagram showing how to assemble the YOUHA breast pump components.

Istruzioni per l'uso

Caricamento del dispositivo

Prima del primo utilizzo, caricare completamente il tiralatte.

• Connect the provided Type-C USB cable to the charging port on the pump motor.
• Connect the other end of the USB cable to a 5V 1A power adapter (not included) or a USB port.
• La spia luminosa della batteria indicherà lo stato di carica:
  • Verde: 31%-100% addebitato
  • Arancia: 11%-30% addebitato
  • Rosso: 1%-10% addebitato
• A full charge typically takes about 2 hours and provides 2-4 pumping sessions, depending on usage.
• Nota importante: Do not charge the device for more than 24 hours, as this may damage the battery.

Image: The pump motor connected to its USB-C charging cable, illustrating the charging process.

Operazione di pompaggio

Once assembled and charged, the pump is ready for use.

1. Accensione/spegnimento: Long press the power button (center button with 'M' symbol) to turn the pump on or off.
2. Selezione della modalità: Short press the power button to cycle through the 3 modes:
   • Modalità massaggio: Gentle stimulation to encourage milk let-down.
   • Modalità di aspirazione: Regular pumping for milk expression.
   • Modalita `mista: Combines massage and suction for optimal comfort and efficiency.
3. Adjusting Suction Level: Use the '+' and '-' buttons to adjust the suction intensity. Each mode has 9 adjustable levels.
   • If the indicator light flashes once, the level has been successfully changed.
   • If the indicator light keeps flashing, it indicates you are at the lowest (Level 1) or highest (Level 9) setting for that mode.
4. Sessione di pompaggio: The pump has a default working time of 30 minutes, after which it will automatically stop. You can manually stop it at any time by long-pressing the power button.
5. Milk Collection: After pumping, carefully remove the pump from your breast. There is a small opening at the top of the collection cup to pour out the expressed milk.

Image: The control panel, showing buttons for power, mode selection, and suction level adjustment.

Manutenzione e pulizia

Una pulizia e una manutenzione adeguate sono essenziali per l'igiene e la longevità del tiralatte.

1. Smontaggio: After each use, disassemble all parts that came into contact with breast milk: the silicone breast shield, silicone connector, duckbill valves, and collection cup.
2. Pulizia: Wash these disassembled parts immediately after use with warm soapy water. Use a soft brush to clean hard-to-reach areas. Rinse thoroughly with clean water.
3. Sterilizzazione: These components can be sterilized by boiling water for 5 minutes or using a steam sterilizer. Ensure parts are completely dry before reassembly or storage.
4. Unità motore: The pump motor unit should Mai be submerged in water or sterilized. Wipe it clean with a damp panno se necessario.
5. Essiccazione e stoccaggio: Allow all parts to air dry completely on a clean surface or drying rack. Store the clean, dry pump in a clean, dry place away from direct sunlight.

Image: Disassembled pump components ready for cleaning, emphasizing ease of maintenance.

Image: Illustrating the food-grade, BPA-free materials used in the breast pump components.

Risoluzione dei problemi

If you encounter any issues with your YOUHA Wearable Electric Breast Pump, please refer to the following common problems and solutions:

Se il problema persiste dopo aver provato queste soluzioni, contattare l'assistenza clienti.

Specifiche

Immagine: Dimensioni del prodotto e parametri chiave.

Garanzia e supporto

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official YOUHA websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.