Introduzione
Thank you for choosing Yaheetech Dining Chairs. This manual provides essential information for the safe assembly, proper use, and maintenance of your new chairs. Please read these instructions carefully before assembly and retain them for future reference.
Caratteristiche del prodotto
- Materiali selezionati: Faux leather, solid wood, composite board, foam, and rubberwood construction.
- Facile manutenzione: Wear-proof faux leather seats simplify cleaning and enhance texture.
- Schienale curvo: Ergonomically designed to fit body shape and offer strong support for extended comfort.
- Anti-skid Protection: Foot pads on chair legs prevent floor scratching and accidental sliding.
- Esperienza di seduta confortevole: Soft and smooth faux leather upholstery with high-density foam padding and a supportive high backrest.
Image: High-density foam cushion and waterproof faux leather surface for comfortable seating.
Informazioni sulla sicurezza
- Do not exceed the maximum weight capacity of 300 pounds (135 kg) per chair.
- Assicurarsi che tutte le viti e i bulloni siano ben serrati prima dell'uso. Controllare periodicamente e serrare nuovamente se necessario.
- Non salire sulle sedie.
- Tenere i bambini lontani dall'area di montaggio durante l'installazione.
- Per evitare che le sedie si ribaltino, posizionarle su una superficie piana e stabile.
- Questo prodotto può contenere sostanze chimiche note allo Stato della California come causa di cancro e difetti alla nascita o altri danni riproduttivi.
Contenuto della confezione
Before beginning assembly, ensure all parts listed below are present. If any parts are missing or damaged, please contact customer support.
- Chair Backrest (1 per chair)
- Chair Seat (1 per chair)
- Front Legs (2 per chair)
- Rear Legs (2 per chair)
- Pacchetto hardware (viti, rondelle, chiave a brugola)
Video: Yaheetech PU Leather Dining Chairs Installation Guide. This video demonstrates the assembly process for the dining chairs.
Installazione e assemblaggio
Follow these steps to assemble your Yaheetech Dining Chairs. An Allen wrench is included in the hardware pack.
- Attaccare le zampe anteriori: Align the front legs to the designated holes on the underside of the chair seat. Secure them using the provided screws and washers. Hand-tighten initially.
- Attach Rear Legs: Similarly, attach the rear legs to the underside of the chair seat, securing with screws and washers. Hand-tighten initially.
- Collegare lo schienale: Connect the chair backrest to the seat and legs, ensuring proper alignment. Insert the remaining screws and washers.
- Serraggio finale: Once all parts are loosely assembled, place the chair upright on a flat surface. Apply slight pressure to ensure all legs are balanced. Then, fully tighten all screws using the Allen wrench. Do not overtighten.
- Installare i cuscinetti per i piedi: Screw the adjustable foot pads into the bottom of each leg. Adjust them as needed to ensure the chair is stable and does not wobble.
Image: Visual guide for chair assembly steps.
Istruzioni per l'uso
These dining chairs are designed for indoor use in dining rooms, kitchens, and living rooms. They are suitable for dining purposes and provide comfortable seating for adults.
- Always sit properly on the chair with both feet on the floor.
- Avoid sudden movements or excessive force that could damage the chair or cause injury.
- Non utilizzare la sedia come sgabello o scala.
Manutenzione e cura
To ensure the longevity and appearance of your dining chairs, follow these care instructions:
- Pulizia: Pulisci con un annuncioamp cloth. For tougher stains on the faux leather, use a mild soap solution and then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Controlli regolari: Controllare periodicamente tutte le viti e i collegamenti per assicurarsi che siano ben serrati. Serrare nuovamente se necessario.
- Evitare la luce solare diretta: L'esposizione prolungata alla luce solare diretta può causare lo scolorimento o la screpolatura della similpelle.
- Proteggere dal calore: Keep chairs away from direct heat sources like radiators or fireplaces.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La sedia oscilla | Pavimento irregolare o collegamenti allentati. | Adjust the foot pads on the bottom of the legs. Ensure all screws are tightened evenly. |
| Le viti si allentano nel tempo | Normale usura dovuta all'uso. | Periodically check and re-tighten all screws with the provided Allen wrench. |
| La finta pelle appare opaca o sporca | Accumulo di polvere o fuoriuscite. | Cancella con pubblicitàamp cloth. For stubborn marks, use a mild soap solution and dry thoroughly. |
Specifiche
| Attributo | Dettaglio |
|---|---|
| Marca | Prodotti |
| Numero di modello | Codice articolo YT-00103465-001 |
| Colore | Grigio scuro |
| Materiale | Faux Leather, Solid Wood, Composite Board, Foam, Rubberwood |
| Dimensioni del prodotto (P x L x A) | 22.5" x 18" x 36.5" |
| Altezza del sedile | 20 pollici |
| Profondità del sedile | 16.5 pollici |
| Peso massimo raccomandato | 300 libbre (135 kg) |
| Peso dell'articolo (per sedia) | Approx. 13.86 lbs (6.29 kg) - Calculated from 55.45 lbs for 4 chairs |
| Assemblaggio richiesto | SÌ |
| Uso interno ed esterno | Al chiuso |
Garanzia e supporto
Yaheetech offers a 30-day easy return policy for this product. For any questions, concerns, or to inquire about extended protection plans (2-Year or 3-Year Protection Plan), please contact Yaheetech customer support through your purchase platform or visit the official Yaheetech websito.
Informazioni sui contatti:
- Customer Service: Refer to your purchase platform for direct contact.
- Websito: www.yaheetech.shop (Example, please verify actual websito)