Boston Tech BE108 Paraffin Wax Bath

Introduzione

The Boston Tech BE108 paraffin wax bath is a fast and safe heating device designed to soften skin and relieve joint pain. It is suitable for both cosmetic and therapeutic use, offering benefits for muscle pain, arthritis, and general skin revitalization. This manual provides essential instructions for the safe and effective use of your paraffin wax bath.

Importanti istruzioni di sicurezza

• Leggere tutte le istruzioni prima di utilizzare l'apparecchio.
• Non immergere l'apparecchio in acqua o altri liquidi.
• Scollegare sempre l'apparecchio dalla presa di corrente subito dopo l'uso e prima della pulizia.
• Non utilizzare l'apparecchio con un cavo o una spina danneggiati, o se non funziona correttamente o è stato danneggiato in qualsiasi modo.
• Tenere il cavo lontano da superfici calde.
• Non utilizzare all'aperto.
• Assicurarsi sempre che l'apparecchio sia posizionato su una superficie stabile e resistente al calore.
• This appliance includes an overheat protection system and an insulating grid for safe operation.
• Do not touch the hot wax directly. Always check the temperature before use.
• Tenere fuori dalla portata dei bambini.

Contenuto della confezione

Your Boston Tech BE108 Paraffin Wax Bath package includes the following items:

• 1 x Boston Tech BE108 Paraffin Wax Bath Unit
• 2 x Paraffin Wax Blocks (450g each)
• 1 x Insulating Grid
• 2 x Thermal Gloves
• 100 x Plastic Gloves
• Pennello 1 x
• 1 x Manuale utente

Prodotto finitoview

The Boston Tech BE108 features a robust design with high-quality ABS and heat-resistant aluminum. It has a compact and elegant form factor, making it easy to clean and suitable for various environments.

Pannello di controllo

The control panel allows for precise temperature regulation and mode selection.

• Temperature Regulation Buttons: Use these to adjust the desired wax temperature between 30°C and 85°C.
• Pulsante On/Off: Accende o spegne l'unità.
• Interruttore di modalità: Selects different operating modes (if applicable).
• Schermo LCD: Visualizza la temperatura attuale.

Impostare

1. Posizionamento: Place the paraffin wax bath on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the unit.
2. Inserisci griglia: Place the insulating grid at the bottom of the wax bath. This prevents direct contact between the heating element and the user's skin.
3. Aggiungere cera: Open the paraffin wax blocks and place them into the bath. The unit has a 5-liter capacity. Ensure the wax level is between the minimum and maximum fill lines.
4. Accensione: Plug the power cord into a suitable electrical outlet. Press the On/Off button to turn on the unit.
5. Imposta temperatura: Use the temperature regulation buttons to set the desired melting temperature. For initial melting, a higher temperature (e.g., 70-80°C) can be used to speed up the process.
6. Sciogliere la cera: Allow approximately 40 minutes for the wax to fully melt. The LCD screen will display the current temperature. Once melted, adjust the temperature to a comfortable and safe level for skin application (typically between 45-55°C).

Istruzioni per l'uso

Paraffin Treatment for Hands, Feet, or Elbows

1. Preparazione: Assicurarsi che la zona da trattare (mani, piedi o gomiti) sia pulita e asciutta. Rimuovere eventuali gioielli.
2. Controllo della temperatura: Before dipping, test a small amount of wax on your wrist to ensure the temperature is comfortable and not too hot. The recommended temperature for application is typically between 45-55°C.
3. First Dip: Slowly dip your hand, foot, or elbow into the melted paraffin wax. Immediately remove it, allowing the wax to solidify slightly (a few seconds).
4. Repeat Dips: Repeat the dipping process 3-5 times, or until a thick, even layer of wax has formed.
5. Copertura: Immediately after the final dip, cover the treated area with a plastic glove, followed by a thermal glove. This helps retain heat and maximize the therapeutic effect.
6. Relax: Keep the wax on for 10-15 minutes. During this time, the heat will penetrate, providing relief and hydrating the skin.
7. Rimozione: Gently peel off the solidified wax. The wax should come off easily, taking dead skin cells with it. Discard the used wax.

Manutenzione e pulizia

1. Raffreddare: After each use, turn off the unit and unplug it from the power outlet. Allow the wax to cool and solidify completely.
2. Rimuovere la cera: Once the wax has solidified, it can often be removed as a single block. If necessary, gently scrape the sides with a non-abrasive tool to loosen it.
3. Interni puliti: Utilizzare un morbido, damp cloth to wipe the interior of the bath. Do not use abrasive cleaners or solvents, as these can damage the surface.
4. Esterno pulito: Pulire la parte esterna dell'unità con un panno morbido e asciutto.
5. Magazzinaggio: Conservare l'apparecchio in un luogo fresco e asciutto quando non viene utilizzato.

Risoluzione dei problemi

• Wax not melting: Ensure the unit is properly plugged in and turned on. Check that the temperature setting is high enough for melting (e.g., 70-85°C). Allow sufficient time for the wax to melt (approx. 40 minutes).
• Wax too hot/cold: Adjust the temperature using the control panel buttons. Allow a few minutes for the wax to reach the new temperature. Always test the wax temperature before application.
• Irritazione cutanea: If you experience any skin irritation, redness, or discomfort, discontinue use immediately. Consult a healthcare professional if symptoms persist.
• L'unità non si accende: Check the power connection and ensure the outlet is functional. If the issue persists, contact customer support.

Specifiche

Garanzia e supporto

The Boston Tech BE108 Paraffin Wax Bath comes with a Garanzia di 3 anno. For any technical assistance, product inquiries, or warranty claims, please contact Boston Tech official technical service in your region. Refer to the contact information provided on the product packaging or the official Boston Tech websito.