Manuale dell'attuatore di ricambio per l'apriporta da garage Hormann SupraMatic E Series 4 4510253

1. Prodotto finitoview

The Hormann SupraMatic E Series 4 (model 4510253) is a replacement actuator designed for Hormann garage door operators. This unit serves as a direct replacement for defective operator heads, ensuring compatibility with existing Hormann drive rails and SupraMatic Series 4 systems. It integrates advanced features for reliable and efficient garage door operation.

Image showing the compact design of the Hormann SupraMatic E Series 4 replacement actuator, featuring its main housing and connection points.

2. Caratteristiche principali

• Compatibilità: Designed to replace older SupraMatic E Series 3 drive heads and compatible with SupraMatic (excluding SupraMatic S) and ProMatic 1st Generation systems.
• Door Capacity: Suitable for garage doors up to 5500 mm wide and a maximum surface area of 13.75 m².
• Forza operativa: Provides a pulling and pushing force of 650 N, with a peak power of 800 N.
• Velocità: Achieves a maximum operating speed of 25 cm/s.
• Tecnologia integrata: Features an integrated 5-channel BiSecur receiver, Bluetooth receiver, and an LED module for illumination.

3. Contenuto della confezione

Dopo aver disimballato, verificare che tutti i componenti siano presenti:

• 1 x SupraMatic E Series 4 replacement motor with integrated 5-channel BiSecur receiver, Bluetooth receiver, and LED module.
• 1 x BlueSecur card with QR code.

4. Configurazione e installazione

This section outlines the general procedure for replacing an existing Hormann garage door operator head. For detailed, model-specific instructions, refer to the comprehensive manual provided with your original Hormann system or consult the manufacturer's websito.

1. La sicurezza prima di tutto: Disconnect power to the garage door opener at the circuit breaker before beginning any work. Ensure the garage door is in a stable, secure position.
2. Dismount Old Operator Head: Carefully remove the existing, defective operator head from its mounting brackets and drive rail. Note the connections and wiring for reference.
3. Install New Operator Head: Mount the new SupraMatic E Series 4 replacement actuator onto the existing drive rail and secure it using the appropriate hardware. Reconnect all necessary wiring according to the original system's configuration.
4. Collegamento elettrico: Ricollegare l'alimentazione all'apriporta del garage.
5. Procedura di apprendimento: Perform the initial learning procedure as described in the original system's manual to calibrate the new actuator to the garage door's travel limits.
6. Program Transmitters: Program any manual transmitters (remote controls) to the new actuator to restore full operation. Utilize the BlueSecur card and QR code for Bluetooth connectivity setup if desired.

Nota: Professional installation is recommended if you are unfamiliar with electrical wiring or garage door mechanisms.

5. Istruzioni per l'uso

Once installed and configured, the SupraMatic E Series 4 operates similarly to other Hormann garage door openers. Use your programmed remote control or the integrated Bluetooth functionality via the BlueSecur app to open and close the garage door.

Parametri operativi:

• Door Width (Max): 5500 millimetri
• Door Surface Area (Max): 13.75 m²
• Pulling/Pushing Force: 650 N
• Velocità massima: 25 centimetri/secondo
• Temperatura di esercizio: da -20 °C a +60 °C
• Giornaliero/Hourly Cycles (Open/Close): 25/10
• Motore: 24 V CC
• Alimentazione elettrica: 230-240 V AC
• Consumo energetico: 0.2 kW
• Consumo in standby: <1W
• Classe di protezione: Suitable only for dry areas.
• Automatic Power Supply: Yes, only in combination with a photocell.

6. Manutenzione

Regular maintenance ensures the longevity and safe operation of your garage door opener. While the SupraMatic E Series 4 actuator itself requires minimal maintenance, it is crucial to maintain the entire garage door system.

• Ispezione annuale: Have your garage door system, including springs, cables, rollers, and tracks, inspected by a qualified technician annually.
• Lubrificazione: Lubricate moving parts of the garage door (not the opener itself) as recommended by the garage door manufacturer.
• Pulisci sensori: Keep safety sensors (photocells) clean and free from obstructions to ensure proper operation.
• Controllare i dispositivi di fissaggio: Controllare periodicamente che tutti i bulloni di montaggio e gli elementi di fissaggio siano ben serrati.

7. Risoluzione Dei Problemi

If you encounter issues with your SupraMatic E Series 4, consider the following general troubleshooting steps. For persistent problems, consult a qualified technician.

• Nessun potere: Check the circuit breaker and ensure the opener is plugged into a working outlet.
• Il telecomando non funziona: Verify battery in the remote. Ensure the remote is programmed correctly to the opener.
• La porta non si chiude: Check safety sensors for obstructions or misalignment. The LED on the sensor should indicate proper alignment.
• Rumori insoliti: Inspect the garage door's mechanical components (springs, rollers, tracks) for wear or damage. Lubricate as necessary.
• Door Reverses: This often indicates an obstruction or a misadjusted closing force. Clear any obstructions and refer to the original manual for force adjustment.

8. Specifiche

9. Garanzia e supporto

For warranty information and technical support, please refer to the official Hormann documentation included with your product or visit the official Hormann websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

Disponibilità ricambi: Information regarding the availability of spare parts is currently unavailable. Please contact Hormann customer service for inquiries.