JIARUIXIN JR1922RXS

JIARUIXIN JR1922RXS 2.4G Bluetooth Remote Control and Receiver Kit Instruction Manual

1. Introduzione

This manual provides essential instructions for the installation, operation, and maintenance of your JIARUIXIN JR1922RXS 2.4G Bluetooth Remote Control and Receiver Kit. This kit is designed as a replacement part for specific children's powered ride-on cars. Please read this manual thoroughly before use to ensure proper function and safety.

2. Prodotto finitoview

The JR1922RXS kit includes a control box (receiver) and a 2.4G Bluetooth remote control. The control box operates at 12V and uses 2.4G Bluetooth for communication with the remote. It is designed to replace a faulty or lost control system in compatible children's electric ride-on vehicles.

JR1922RXS Control Box and Remote Control

Image 1: The JR1922RXS control box and its accompanying 2.4G Bluetooth remote control. The control box is a black rectangular unit with various ports, and the remote is a white, ergonomic controller with black buttons.

3. Compatibilità

This JR1922RXS control box is specifically designed for children's powered ride-on cars that originally used a JR1922RXS system with a white 7-pin socket. To confirm compatibility, open your vehicle and visually inspect the existing control box. If its appearance and model number (JR1922RXS) match, this replacement part should be suitable.

Nota importante: The JR1922RXS (white 7-pin socket) is non compatibile with the JR1922RXS-AD (blue 7-pin socket). Please verify the socket color and model number of your original unit before purchase.

JR1922RXS and JR1922RXS-AD Incompatibility

Image 2: Comparison illustrating the incompatibility between the JR1922RXS control box (left, with white 7-pin socket) and the JR1922RXS-AD control box (right, with blue 7-pin socket). Both units are black rectangular boxes with similar layouts, but the distinct socket colors indicate different models.

4. Contenuto della confezione

  • 1 x JR1922RXS Control Box (Receiver)
  • 1 x 2.4G Bluetooth Remote Control

5. Configurazione e installazione

5.1 Installazione della scatola di controllo

  1. Locate the existing control box in your child's ride-on car. This typically requires opening a compartment or panel.
  2. Carefully disconnect all wires and connectors from the old control box. Note their positions if necessary.
  3. Install the new JR1922RXS control box in the same location.
  4. Reconnect all wires and connectors to the new control box, ensuring they are securely attached.

5.2 Installazione della batteria del telecomando

The remote control requires two AAA (1.5V) batteries.

  1. Individuare il vano batterie sul retro del telecomando.
  2. Use a small screwdriver to loosen the screw securing the battery cover.
  3. Inserire due batterie AAA, assicurandosi della corretta polarità (+/-).
  4. Riposizionare il coperchio della batteria e serrare la vite.
Remote Control Battery Installation and Button Layout

Image 3: Diagram showing the back of the remote control with the battery compartment, indicating where to loosen a screw to insert two AAA (1.5V) batteries. The diagram also illustrates the button layout on the front of the remote, labeling Forward, Speed, Back, Brake, Right, Left, and the 'P' button.

6. Istruzioni per l'uso

6.1 Remote Control Pairing (Resyncing)

The remote control must be paired with the control box for proper operation. This process should be performed after installing new batteries in the remote or if the remote loses connection.

  1. Load two AAA batteries into the remote controller.
  2. Turn off the power switch on the ride-on vehicle.
  3. On the remote control, hold down the "" (Forward) and "" (Back) buttons simultaneously for 3 seconds to initiate the pairing process. The first indicator light on the remote will flicker.
  4. While the remote's indicator light is flickering, turn on the vehicle's power switch.
  5. The red indicator lights on the remote will stop flashing, indicating that the pairing (code matching) is successful.

6.2 Funzioni del telecomando

The remote control features several buttons for operating the ride-on car:

  • S (Speed) Button: Controls the speed setting.
    - 1 LED lit: Low speed
    - 2 LEDs lit: Medium speed
    - 3 LEDs lit: High speed
  • ▲ (Forward) Button: Moves the vehicle forward.
  • ▼ (Back) Button: Moves the vehicle backward.
  • ◀ (Left) Button: Turns the vehicle left.
  • ▶ (Right) Button: Turns the vehicle right.
  • P (Brake) Button: Holds the brake. All indicator lights will flicker when pressed.
JR1922RXS Remote Control Front View

Immagine 4: anteriore view of the JR1922RXS remote control, showing the layout of the black control buttons on a white casing. The buttons include directional arrows, a speed selector 'S', and a brake 'P' button.

7. Manutenzione

  • Keep the control box and remote control clean and dry. Avoid exposure to moisture or extreme temperatures.
  • Regularly check all wire connections to the control box to ensure they are secure.
  • Replace remote control batteries promptly when performance degrades or the indicator light fails to illuminate.
  • Store the remote control in a safe place to prevent loss or damage.

8. Risoluzione Dei Problemi

  • Il veicolo non risponde al telecomando:
    - Ensure the vehicle's power is on.
    - Check if the remote control batteries are fresh and correctly installed.
    - Perform the remote control pairing (resyncing) procedure as described in Section 6.1.
    - Verify that the control box is securely connected to the vehicle's wiring harness.
  • Controllo intermittente:
    - This may indicate low remote control battery power. Replace batteries.
    - Ensure there are no strong radio interference sources nearby.
  • Vehicle does not power on:
    - This issue is likely related to the vehicle's main battery or wiring, not the control box or remote. Consult your vehicle's primary manual.

9. Specifiche

  • Modello: JR1922RXS
  • Voltage: CC 12V
  • Metodo di controllo: Bluetooth 2.4G
  • Corrente di carico: Massimo 35A
  • Frequenza: 2.405 GHz - 2.485 GHz
  • Dimensioni della scatola di controllo: Circa 4.2 x 3.2 x 3.2 pollici (10.7 x 8.1 x 8.1 cm)
  • Peso dell'articolo: Circa 6.4 once (181 grammi)
  • Produttore: JIARUIXIN

10. Garanzia e supporto

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the retailer from whom you purchased this product. You may also visit the official JIARUIXIN store or websito per ulteriore assistenza.

JIARUIXIN Store: Visit the JIARUIXIN Store on Amazon

Documenti correlati - JR1922RXS

Preview Blitzshark 12V Ride On Car: Guida al montaggio, al funzionamento e alla sicurezza
Guida completa per l'auto elettrica Blitzshark 12V, che comprende istruzioni di montaggio, utilizzo, avvertenze di sicurezza, procedure di ricarica e risoluzione dei problemi. Include telecomando, lettore musicale e una struttura robusta, adatta a bambini dai 3 agli 8 anni.
Preview TQ10060 Auto per bambini: Manuale di installazione e funzionamento
Manuale completo di installazione e funzionamento per l'auto elettrica per bambini INFANS TQ10060. Include avvertenze di sicurezza, specifiche, fasi di montaggio, istruzioni di ricarica e risoluzione dei problemi per questo giocattolo elettrico da 12 V.
Preview Trattore per bambini con rimorchio - Manuale d'uso e istruzioni di montaggio
Guida completa per l'assemblaggio, il funzionamento e la manutenzione del trattore elettrico da 12 V con rimorchio. Include elenco dei componenti, specifiche, avvertenze di sicurezza e istruzioni per la ricarica.
Preview Manuale utente della motocicletta elettrica per bambini COSTWAY TQ10106DE
Questo manuale utente fornisce istruzioni complete per la motocicletta elettrica per bambini COSTWAY TQ10106DE, che illustrano come montare, utilizzare, manutenere e risolvere i problemi in modo sicuro, per un'esperienza piacevole e sicura per i bambini.
Preview Specifiche tecniche del connettore BS M12 femmina/maschio con attacco posteriore (saldatura, vite M16*1.5/PG9)
Dettagli tecnici completi per prese posteriori femmina e maschio M12 BS CONNECTOR, che coprono parametri del prodotto, specifiche elettriche, disegni dimensionali e definizioni dei colori dei fili per connettori M16*1.5/PG9.
Preview Manuale d'uso e istruzioni di montaggio del modello Mercedes-Benz G 500 a batteria
Questo documento contiene il manuale d'uso e le istruzioni di montaggio per l'auto giocattolo a batteria Mercedes-Benz G 500. Fornisce informazioni essenziali sulla sicurezza, specifiche dettagliate, un elenco dei componenti, istruzioni di montaggio passo passo, istruzioni per l'uso, procedure di ricarica e suggerimenti per la risoluzione dei problemi. Assicuratevi un funzionamento sicuro e una corretta manutenzione del vostro giocattolo.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.