FLEXISPOT EB9D

Manuale di istruzioni del vassoio portacavi sotto la scrivania FLEXISPOT (modello EB9D)

Model: EB9D

1. Prodotto finitoview

The FLEXISPOT Under Desk Cable Management Tray is designed to organize and conceal cables, power strips, and adapters beneath your desk. This metal raceway helps create a clutter-free and safer workspace by keeping wires tidy and off the floor. Its open design promotes airflow and allows for easy access to cables.

FLEXISPOT Under Desk Cable Management Tray installed under a desk

Image 1.1: The FLEXISPOT Under Desk Cable Management Tray installed, showing organized cables and a power strip.

2. Contenuto della confezione

Prima di iniziare l'installazione, verificare che tutti i componenti siano presenti:

  • Vassoio per la gestione dei cavi (1 PC)
  • Staffa di collegamento (2 PZ)
  • Viti M4x6mm (2 pezzi)
  • Viti St4.8x12mm (4 pezzi)
  • Chiave a brugola da 2.5x2.5 mm (1 pezzo)
Diagram of FLEXISPOT Cable Management Tray components and hardware

Immagine 2.1: Dettagliata view of all included components and hardware for the cable management tray.

Attention: The safe thickness of the table for installation is at least 15mm (0.6 inches) to prevent damage to the table from drilling.

3. Configurazione e installazione

Follow these steps to properly install your FLEXISPOT Under Desk Cable Management Tray:

  1. Step 1: Attach the Connecting Brackets to the Cable Management Tray.
    Use the M4x6mm screws and the provided 2.5x2.5mm Allen key to secure the two connecting brackets to the cable management tray. Ensure they are firmly attached.
  2. Step 2: Attach the Cable Management Tray to the Tabletop.
    Position the assembled tray under your desk in the desired location. Use the St4.8x12mm screws to attach the connecting brackets to the underside of the tabletop. It is recommended to pre-drill pilot holes to prevent wood splitting and ensure a secure fit. Consider the desktop material and thickness before drilling.

Per una guida visiva, fare riferimento al video ufficiale di installazione:

Video 3.1: Official installation guide for the FLEXISPOT CMP502 Cable Management Tray. This video demonstrates the step-by-step process of assembling the tray and mounting it to a desk, including the use of screws and tools.

4. Funzionamento e utilizzo

Once installed, the cable management tray provides an efficient solution for organizing your workspace.

  • Postazione di lavoro ordinata: Place power strips, excess cable lengths, and adapters within the tray to keep them off the floor and out of sight. This significantly reduces visual clutter and creates a more organized environment.
  • Design aperto del flusso d'aria: The tray features an open ventilation design that prevents dust accumulation and allows for proper airflow around electronic components, helping to keep them cool. This design also simplifies adding or removing cables as needed.
FLEXISPOT Cable Management Tray with arrows indicating airflow

Image 4.1: The open design of the tray facilitates airflow, preventing heat buildup and dust accumulation.

  • Improved Safety and Productivity: By organizing cables, you reduce the risk of electrical fires, tripping hazards, and accidental disconnections. A tidy workspace can also minimize distractions and enhance productivity.
  • Protezione degli animali domestici: Keep cables out of reach of pets to protect them from potential harm and prevent damage to your wires.
Before and after comparison of a desk with and without cable management

Image 4.2: A visual comparison demonstrating the significant reduction in cable clutter after installing the management tray.

Image showing a cat playing near cables, with an 'X' over the cat, indicating pet safety

Image 4.3: The cable management tray helps protect pets by keeping wires inaccessible.

5. Manutenzione

The FLEXISPOT Cable Management Tray requires minimal maintenance:

  • Regularly inspect the tray and its mounting screws to ensure they remain secure.
  • Wipe the tray with a dry or slightly damp panno per rimuovere polvere e detriti. Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi.
  • Periodically check cables within the tray for any signs of wear or damage.

6. Risoluzione Dei Problemi

If you encounter any issues with your cable management tray, consider the following:

  • Tray feels loose after installation: Ensure all screws are tightened securely. If the desk material is soft, consider using appropriate anchors for better stability.
  • Power bricks or adapters do not fit: The tray has specific dimensions (19.7x4.7 inches). Taller power bricks may not fit vertically. Try repositioning them horizontally or using smaller adapters if possible.
  • Cables are still visible or messy: Utilize cable ties or Velcro straps within the tray to bundle cables together. Route cables through the designated slots for a cleaner appearance.

7. Specifiche

CaratteristicaDettaglio
MarcaFLESSIBILE
Numero di modelloModello EB9D
FormaRettangolare
ColoreNero
Tipo di finituraNero
Misurare19.7 x 4.7 pollici (500 mm x 120 mm)
Dimensioni del prodotto20.16 x 5.24 x 2.8 pollici
Peso dell'articolo75.9 libbre (34.5 chilogrammi)
Assemblaggio richiesto
Codice UPC810000748020
ProduttoreFLESSIBILE
Data prima disponibilità17 luglio 2020
Diagram showing the dimensions of the FLEXISPOT Cable Management Tray: 19.7 inches length, 4.7 inches width, 3.5 inches height

Immagine 7.1: Dimensioni principali del vassoio di gestione dei cavi.

8. Garanzia e supporto

Per informazioni sulla garanzia o supporto tecnico, fare riferimento al sito ufficiale FLEXISPOT websito o contattare direttamente il servizio clienti. I dettagli sui piani di protezione del prodotto potrebbero essere disponibili anche presso il rivenditore.

© 2025 FLEXISPOT. Tutti i diritti riservati.

Per maggiori informazioni, visita il Negozio FLEXISPOT.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.