SVAVO V-410

SVAVO Automatic Wall-Mounted Touchless Soap Dispenser V-410 (600ml)

Manuale d'uso

1. Introduzione

Thank you for choosing the SVAVO Automatic Wall-Mounted Touchless Soap Dispenser, Model V-410. This device is designed to provide a hygienic and convenient handwashing experience through its infrared sensor technology. With a generous 600ml capacity and a non-drip design, it is suitable for various liquid soaps and locations, including bathrooms, kitchens, hotels, and offices.

SVAVO Automatic Touchless Soap Dispenser dispensing soap into a hand.

Image 1.1: The SVAVO Automatic Touchless Soap Dispenser in operation, dispensing liquid soap.

2. Informazioni importanti sulla sicurezza

Please read all instructions carefully before using the dispenser. Retain this manual for future reference.

Non immergere il dispenser in acqua o altri liquidi.
Assicurarsi che il vano batteria sia chiuso saldamente per impedire l'ingresso di acqua.
Use only the specified battery type (4 x AA batteries). Do not mix old and new batteries or different types of batteries.
Rimuovere le batterie se il distributore non verrà utilizzato per un periodo prolungato.
Per ottenere prestazioni ottimali, mantenere l'area del sensore pulita e libera da ostacoli.
Avoid using highly corrosive liquids or abrasive cleaners on the dispenser.
Questo prodotto è destinato esclusivamente all'uso in ambienti interni.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

SVAVO Automatic Touchless Soap Dispenser Unit (Model V-410)
Wall Mounting Hardware (screws, wall anchors)
Manuale d'uso

4. Caratteristiche del prodotto

Operazione senza tocco: Equipped with a smart motion infrared sensor for sanitary, hands-free dispensing.
Non-Drip Design: The dispensing valve cuts off soap completely after pumping, preventing drips and mess.
Compatibilità versatile: Suitable for various liquid soaps, dish soaps, shampoos, body lotions, and hand sanitizers (ensure liquid is not too thick).
Supporto da parete salvaspazio: Designed to be mounted on a wall, saving countertop space.
Efficienza energetica: Operates on 4 AA-size batteries (not included) with a long battery life of up to one year.
Grande capacità: 600ml (21 fl. oz) reservoir reduces the frequency of refilling.
Circuit Protect Design: Engineered to protect internal circuitry.

Comparison image highlighting SVAVO dispenser's circuit protect design, large soap capacity, large opening for refill, and wall mount feature against other brands.

Image 4.1: Key features of the SVAVO dispenser, including circuit protection and large capacity.

Avvicinamento view of the SVAVO soap dispenser showing its transparent reservoir and sensor area.

Immagine 4.2: Dettagliata view of the dispenser's design.

5. Configurazione e installazione

5.1. Installazione della batteria

Open the battery compartment cover, typically located at the back or top of the dispenser.
Insert 4 new AA-size batteries according to the polarity indicators (+/-) inside the compartment.
Chiudere saldamente il coperchio del vano batterie.

Diagram showing how to properly install 4 AA batteries into the dispenser's battery compartment.

Image 5.1: Proper installation of 4 AA batteries.

5.2. Montaggio a parete

Choose a suitable location on a wall, ensuring the installation height is between 8-12 inches (20-30 cm) above the counter or sink to allow for proper sensor activation and hand placement.
Mark the positions for the mounting screws using the dispenser's mounting holes as a template.
Praticare i fori nei punti contrassegnati. Inserire i tasselli a muro se necessario.
Align the dispenser with the drilled holes and secure it to the wall using the provided screws.

SVAVO dispenser mounted on a bathroom wall, showing product dimensions and recommended installation height of 8-12 inches.

Image 5.2: Wall mounting instructions with recommended height and dimensions.

5.3. Riempimento del distributore

Aprire il coperchio superiore del dispenser.
Carefully pour liquid soap, shampoo, body wash, dish soap, or makeup remover into the reservoir. Do not overfill.
Chiudere bene il coperchio superiore.

SVAVO dispenser with a clear container, indicating its large capacity and ease of refilling.

Image 5.3: The dispenser's large, clear container for easy refilling.

Close-up of the dispenser's wide opening for easy refilling of liquids.

Image 5.4: The wide opening at the top facilitates easy refilling.

Close-up of the dispenser's top lid, showing how it opens for refilling.

Image 5.5: The top lid mechanism for accessing the reservoir.

6. Istruzioni per l'uso

6.1. Accensione/spegnimento

The dispenser features an On/Off button, typically located near the sensor or on the top. Press the button to turn the unit on or off. A light indicator may confirm the status.

6.2. Erogazione del sapone

Assicurarsi che il distributore sia acceso.
Place your hand approximately 2-3 inches (5-7 cm) below the dispensing nozzle. The infrared sensor will detect your hand.
The dispenser will automatically release a pre-measured amount of liquid (approximately 1ml).
Remove your hand once soap is dispensed. The non-drip valve will prevent excess dripping.

Mother and child using the touchless soap dispenser, emphasizing improved hygiene.

Image 6.1: Using the touchless dispenser for hygienic handwashing.

Close-up of the dispenser's sensor and nozzle, showing the automatic dispensing mechanism.

Image 6.2: Detail of the sensor and dispensing area.

6.3. Primo utilizzo / Primerizzazione

When using for the first time or after refilling, it may be necessary to activate the sensor several times until the liquid starts to dispense consistently. This primes the pump mechanism.

7. Manutenzione e cura

7.1. Pulizia dell'esterno

Pulire l'esterno del dispenser con un panno morbido eamp panno. Non utilizzare detergenti abrasivi, solventi o immergere l'unità in acqua.

7.2. Ricarica

When the liquid level in the transparent reservoir is low, refill it as described in Section 5.3. Regular refilling prevents the pump from running dry.

7.3. Sostituzione della batteria

When the dispenser's performance decreases (e.g., slower dispensing, indicator light flashing), it is time to replace the batteries. Follow the steps in Section 5.1.

7.4. Preventing Clogs

If using thicker liquids, dilute them slightly with water to ensure smooth dispensing. Periodically, you may run warm water through the dispenser (after emptying soap) to clear any potential clogs in the nozzle.

8. Risoluzione Dei Problemi

Problema	Possibile causa	Soluzione
Il distributore non si accende o non eroga.	Batteries are dead or incorrectly installed. Dispenser is turned off.	Replace batteries with new ones, ensuring correct polarity. Turn the dispenser on using the power button.
No soap dispensed, but motor runs.	Reservoir is empty. Pump is not primed. Liquid is too thick or clogged.	Refill the reservoir. Activate the sensor several times to prime the pump. Dilute thick liquids or clean the nozzle.
Soap leaks from the dispenser.	Lid not closed properly. Liquid is too thin. Internal seal issue.	Ensure the top lid is securely closed. Use a slightly thicker liquid soap. If leaking persists, contact customer support.
Sensor is not responding.	Sensor is dirty or obstructed. Insufficient light.	Clean the sensor window with a soft cloth. Ensure adequate lighting in the area.

9. Specifiche

Modello: V-410
Marca: SVAVO
Colore: Grigio
Materiale: Plastica
Volume del liquido: 600 Milliliters (21 fl. oz)
Dimensioni del prodotto: 4.3"L x 3.9"W x 6.5"H (110 mm L x 100 mm W x 165 mm H)
Peso dell'articolo: 1.1 libbre
Fonte di energia: 4 batterie AA (non incluse)
Codice UPC: 711745909168

10. Garanzia e assistenza clienti

SVAVO provides lifetime technical support for this product. If you encounter any issues with your touchless soap dispenser, please do not hesitate to contact us via the Amazon email system. We are committed to assisting you until you are satisfied.

For further assistance, please refer to the contact information provided with your purchase or visit the official SVAVO store on Amazon.