RYOBI 10 in. Compound Miter Saw with LED Instruction Manual

1. Introduzione

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of the RYOBI 10 inch Compound Miter Saw with LED, Model TS1346. Please read and understand all instructions before operating the saw to ensure personal safety and proper tool function. This heavy-duty miter saw is designed for precision cutting of wood materials, featuring a 14 Amp motor delivering up to 5,500 RPM and an LED Cutline Indicator for enhanced accuracy.

2. Informazioni generali sulla sicurezza

AVVERTIMENTO: Leggere tutte le avvertenze di sicurezza, le istruzioni, le illustrazioni e le specifiche fornite con questo elettroutensile. La mancata osservanza di tutte le istruzioni elencate di seguito può causare scosse elettriche, incendi e/o lesioni gravi.

• Always wear eye protection, hearing protection, and a dust mask when operating the miter saw.
• Assicurarsi che il pezzo sia saldamente clampprima di effettuare qualsiasi taglio.
• Keep hands and fingers away from the blade area. Never reach under the blade guard.
• Disconnect the power supply before changing blades, performing maintenance, or clearing jammed material.
• Mantenere un'area di lavoro pulita e ben illuminata. Aree disordinate o buie favoriscono gli incidenti.
• Non utilizzare utensili elettrici in atmosfere esplosive, ad esempio in presenza di liquidi, gas o polveri infiammabili.
• Utilizzare la lama corretta per il materiale da tagliare.
• Never force the tool. Let the blade speed and sharpness do the work.
• Prima dell'uso, assicurarsi che la sega sia stabile e montata saldamente.

3. Contenuto della confezione

Verify that all items listed below are included in your package. If any parts are missing or damaged, contact RYOBI customer service.

• RYOBI 10 in. Compound Miter Saw with LED
• 24-tooth Carbide-Tipped Blade
• Chiave a lama
• Sacchetto per la polvere
• Lavoro Clamp
• Manuale dell'operatore (questo documento)

4. Impostazione

4.1 Disimballaggio e montaggio

Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Place the saw on a stable, level workbench or miter saw stand.

4.2 Installazione della lama

1. Assicurarsi che la sega sia scollegata dalla fonte di alimentazione.
2. Premere il pulsante di blocco del mandrino per impedire alla lama di ruotare.
3. Using the provided blade wrench, loosen the arbor nut by turning it clockwise (it is reverse-threaded).
4. Remove the outer blade washer and the old blade (if applicable).
5. Place the new 24-tooth carbide-tipped blade onto the arbor, ensuring the teeth are pointing downwards towards the front of the saw.
6. Reinstall the outer blade washer and arbor nut. Tighten the arbor nut firmly by turning it counter-clockwise while holding the spindle lock.

4.3 Attacco del sacchetto per la polvere

Attach the dust bag to the dust port located at the rear of the blade housing. This helps collect sawdust and maintain a cleaner work environment.

Figure 4.1: The Ryobi 10 inch Compound Miter Saw with LED, showing its overall design and key components.

5. Istruzioni per l'uso

5.1 Accensione e spegnimento

To turn the saw ON, press the trigger switch on the handle. To turn it OFF, release the trigger switch. The saw features a brake for quick blade stops.

5.2 Regolazione dell'angolo di taglio obliquo

To adjust the miter angle, depress the miter lock handle and rotate the turntable to the desired angle indicated on the miter scale. Release the handle to lock the angle. Common detents are provided for quick adjustments at standard angles (e.g., 0°, 15°, 22.5°, 31.6°, 45°).

5.3 Using the LED Cutline Indicator

The integrated LED projects a shadow line onto the workpiece, indicating the exact cutting path of the blade. Align your pencil mark with this shadow line for precise cuts. Ensure the LED is clean for optimal visibility.

5.4 Effettuare tagli

1. Place the workpiece firmly against the fence and the saw table.
2. Secure the workpiece with the work clamp to prevent movement during the cut.
3. Lower the blade slowly into the workpiece, allowing the blade to reach full speed before engaging the material.
4. Maintain a steady, controlled feed rate. Do not force the saw.
5. Once the cut is complete, allow the blade to stop completely before raising the saw arm.

6. Manutenzione

Regular maintenance ensures the longevity and safe operation of your miter saw. Always disconnect the saw from the power source before performing any maintenance.

6.1 Pulizia

• After each use, clean the saw with a soft cloth to remove sawdust and debris.
• Use compressed air to clear dust from motor vents and moving parts.
• Periodically empty and clean the dust bag for efficient dust collection.

6.2 Cura della lama

• Controllare regolarmente la lama per verificare che non sia smussata, crepata o che non manchino denti. Sostituire immediatamente le lame danneggiate.
• Clean resin and pitch buildup from the blade using a blade cleaner.

6.3 Lubrificazione

The saw's internal components are factory-lubricated and generally do not require additional lubrication. Refer to the full operator's manual for specific lubrication points if necessary.

7. Risoluzione Dei Problemi

8. Specifiche

Numero modello:

TS1346

Marca:

RYOBI

Fonte di energia:

Elettrico con cavo

Voltage:

120 Volt

Cosatage:

1680 watt

Velocità:

5500 giri al minuto

Diametro lama:

10 pollici

Numero di denti:

24 (Carbide-Tipped)

Caratteristiche speciali:

Brake, Spindle Lock, LED Cutline Indicator

Material (Handle):

Plastica

Standard di sicurezza:

UL safety standards

Dimensioni articolo (L x P x A):

10"L x 2"W x 10"H (Note: These dimensions typically refer to the blade, not the full saw. Refer to manufacturer's full specifications for tool dimensions.)

9. Garanzia e supporto

The RYOBI 10 in. Compound Miter Saw with LED is backed by the RYOBI 3-Year Manufacturer's Warranty. For warranty claims, technical support, or to order replacement parts, please contact RYOBI customer service or visit their official websito. Conservare la ricevuta d'acquisto come prova d'acquisto ai fini della garanzia.

Durata della disponibilità dei pezzi di ricambio UE: 3 anni

For further assistance, please refer to the official RYOBI websito o contattare la loro linea di assistenza clienti.