SYLVANIA Rugged 4 Inch Cube LED Light Pod Instruction Manual

1. Prodotto finitoview

The SYLVANIA Rugged 4 Inch Cube LED Light Pod is designed for enhanced visibility in off-road and demanding environments. It features a durable construction and a wide flood beam pattern, suitable for various vehicle applications.

Figure 1: SYLVANIA Rugged 4 Inch Cube LED Light Pod.

This LED light pod provides intense 6000K light with 2100 raw lumens. Its wide flood beam is optimized for lower speed applications where increased side road visibility is beneficial. The robust aluminum body ensures optimal heat dissipation and corrosion resistance, while the impact-resistant polycarbonate lens offers durability. It is IP69K rated, providing waterproof protection up to 3 feet for 30 minutes.

2. Componenti inclusi

La confezione del prodotto include i seguenti articoli:

• 1 x LED Pod Light (4-inch cube)
• 1 x Universal Mounting Bracket (stainless steel)
• Hardware di montaggio (bulloni, dadi, rondelle)

Note: A wiring harness kit (Part number LBARHRNS1PBX) is sold separately and is recommended for a professional installation.

Figure 2: LED Pod Light and included mounting hardware.

3. Istruzioni per l'installazione

This LED light pod is designed for easy installation on a wide range of vehicles, including trucks, cars, boats, SUVs, UTVs, ATVs, snowmobiles, motorcycles, dirt bikes, and 4x4 vehicles. For optimal results, consider using a SYLVANIA wiring harness kit (sold separately).

3.1 Montaggio del Light Pod

1. Seleziona la posizione di montaggio: Choose a suitable location on your vehicle for the light pod. Ensure the location provides clear light projection and does not obstruct other vehicle functions or lights.
2. Posizione della staffa: Attach the universal stainless steel mounting bracket to the light pod using the provided hardware. Do not fully tighten yet.
3. Fissaggio al veicolo: Position the light pod with the attached bracket onto the desired mounting surface on your vehicle. Mark the drilling points if necessary.
4. Drill Holes (if required): If mounting to a surface without existing holes, carefully drill pilot holes appropriate for the mounting hardware.
5. Fasten Securely: Use the provided bolts, nuts, and washers to securely fasten the light pod to the vehicle. Ensure all connections are tight to prevent vibration and movement.
6. Regola l'angolo: Adjust the angle of the light pod to achieve the desired beam direction. Once set, fully tighten all mounting hardware.

Figura 3: Esample of universal mounting brackets for SYLVANIA lights.

3.2 Wiring the Light Pod

For wiring, it is highly recommended to use a dedicated wiring harness (sold separately) to ensure proper power delivery and protection. If not using a harness, ensure appropriate gauge wiring, fuses, and relays are used to prevent electrical issues.

1. Scollegare l'alimentazione: Prima di iniziare qualsiasi cablaggio, scollegare la batteria del veicolo per evitare cortocircuiti.
2. Collegare il cablaggio: Connect the positive wire from the light pod to the positive terminal of your power source (e.g., battery via a relay and fuse). Connect the negative wire to a suitable ground point on the vehicle chassis.
3. Installa Switch: If using a switch, integrate it into the positive power line according to the switch manufacturer's instructions.
4. Cablaggio sicuro: Route all wiring safely, away from moving parts, hot surfaces, and sharp edges. Use zip ties or cable clampAiuta a fissare il cablaggio.
5. Ricollegare l'alimentazione: Once all wiring is complete and secured, reconnect the vehicle's battery.
6. Funzionalità di prova: Turn on the light pod to ensure it functions correctly.

Figure 4: SYLVANIA wiring harnesses (sold separately) for easy installation.

4. Funzionamento

The SYLVANIA Rugged 4 Inch Cube LED Light Pod is designed for straightforward operation.

1. Accensione/spegnimento: Activate the light pod using the installed switch.
2. Modello del fascio: The light pod features a super wide flood beam, providing broad illumination for increased side road visibility. This is particularly useful in low-speed off-road applications.

Figure 5: Super wide flood beam pattern for the 4-inch cube LED light pod.

4.1 Applicazioni

This light pod is suitable for a variety of applications where robust, wide-angle illumination is needed:

• Trucks, SUVs, CUVs
• ATVs, UTVs
• Heavy Duty Equipment
• Navi marittime

Figura 6: Esamples of vehicles compatible with SYLVANIA off-road lights.

5. Specifiche tecniche

Figura 7: Dimensioni del prodotto e caratteristiche principali.

6. Manutenzione

Regular maintenance ensures the longevity and optimal performance of your SYLVANIA LED Light Pod.

• Pulizia: Clean the lens and housing periodically with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the polycarbonate lens or powder coating.
• Ispezione: Regularly inspect the mounting hardware for tightness. Vibrations from vehicle operation can loosen bolts over time.
• Controllo del cablaggio: Periodically check the wiring for any signs of wear, fraying, or corrosion. Ensure all connections remain secure and waterproof.
• Valutazione del danno: If the light pod sustains impact, inspect the housing and lens for cracks or damage that could compromise its waterproof integrity.

7. Risoluzione Dei Problemi

If you encounter issues with your LED light pod, refer to the following common troubleshooting steps:

8. Informazioni sulla garanzia

SYLVANIA Off-Road LED light pods are backed by a Lifetime Limited Warranty. For detailed terms and conditions, please refer to the packaging or visit the official SYLVANIA websito.

9. Assistenza clienti

For further assistance, technical support, or warranty claims, please contact SYLVANIA customer service. Refer to the product packaging or the official SYLVANIA websito per le informazioni di contatto.

Puoi anche visitare il Negozio SYLVANIA su Amazon per maggiori informazioni sui prodotti e sugli accessori.