1. Prodotto finitoview
The Weiser Tavaris Entry Door Handle and Vedani Interior Lever Handleset offers a modern and elegant design for your home's entry. This handleset is designed to be paired with a separate Weiser deadbolt (electronic or mechanical) as it does not include a locking deadbolt. The crisp, clean appearance of the Satin Nickel finish complements various home styles.
Caratteristiche principali:
- Designed for pairing with a separate Weiser deadbolt (not included).
- Includes Tavaris lever for the interior side of the door.
- Features an adjustable latch to fit all standard door preparations.
- Easy installation with basic tools.
2. Componenti inclusi
Carefully unpack the handleset and verify that all components are present:
- Exterior Handle (Tavaris Entry Door Handle)
- Interior Lever (Vedani Interior Lever)
- Meccanismo di chiusura
- Mounting Hardware (screws, spindle)
- Manuale di installazione (questo documento)
Figura 1: Weiser Tavaris Entry Door Handle. This image shows the full exterior handleset, featuring the sleek, modern design in a satin nickel finish.
3. Configurazione e installazione
Installation of the Weiser Tavaris Handleset is designed to be straightforward and can typically be completed in minutes with a screwdriver.
3.1 Strumenti necessari
- Cacciavite con testa Phillips
- Measuring Tape (optional, for verifying door preparation)
3.2 Preparazione della porta
Ensure your door is prepared with standard bore holes. The handleset features an adjustable latch to accommodate common backset dimensions.
3.3 Passaggi di installazione
- Installa fermo: Insert the latch mechanism into the edge of the door. Ensure the bevel of the latch bolt faces the door frame. Secure with screws.
- Installare la maniglia esterna: Position the exterior handle on the door, aligning the spindle through the latch mechanism.
- Install Interior Lever: Place the interior lever assembly onto the door, ensuring the spindle engages correctly.
- Secure Assemblies: Use the provided mounting screws to firmly attach the interior and exterior components together. Do not overtighten.
- Operazione di prova: Verify that the handle and lever operate smoothly and retract the latch bolt fully.
Figura 2: Weiser Vedani Interior Lever. This image displays the interior lever, which features a square rose and a flat, rectangular lever in a satin nickel finish.
Figura 3: Weiser Tavaris Handleset Components. This image shows a close-up of the handleset's top mechanism, including the latch and part of the exterior handle, highlighting the satin nickel finish.
4. Istruzioni per l'uso
The Weiser Tavaris Entry Door Handle and Vedani Interior Lever Handleset provides a simple and reliable mechanism for opening and closing your door.
- To Open from Exterior: Depress the thumb-press on the exterior handle to retract the latch bolt, then pull or push the door open.
- To Open from Interior: Depress the interior lever to retract the latch bolt, then pull or push the door open.
- Chiudere: Simply push the door shut. The spring latch will automatically engage.
Nota: This handleset does not include a deadbolt. For security, ensure a compatible Weiser deadbolt is installed above this handleset.
5. Manutenzione
Proper care will ensure the longevity and appearance of your Weiser handleset.
- Pulizia: Pulisci regolarmente il set di maniglie con un panno morbido eamp cloth. Avoid abrasive cleaners, harsh chemicals, or polishing agents, as these can damage the finish.
- Lubrificazione: If the latch mechanism becomes stiff over time, apply a small amount of silicone-based lubricant to the moving parts of the latch bolt. Do not use oil-based lubricants.
- Viti di serraggio: Periodically check and tighten any loose mounting screws to ensure secure operation. Do not overtighten.
6. Risoluzione Dei Problemi
If you encounter issues with your handleset, refer to the following common problems and solutions:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Handle/Lever is stiff or hard to turn. | Lack of lubrication, misaligned components, or debris. | Apply silicone lubricant to the latch bolt. Check for proper alignment during installation. Clean any debris. |
| Il chiavistello non si ritrae completamente. | Improper installation, loose screws, or worn components. | Recheck installation steps, ensure screws are tightened. If issue persists, contact support. |
| Handleset feels loose on the door. | Viti di montaggio allentate. | Tighten all mounting screws. Do not overtighten. |
7. Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Marca | Bianco |
| Numero di modello | 9GLA77710-002 |
| Codice UPC | 059184390384 |
| Materiale | Metal, Stainless Steel Handle |
| Colore/Finitura | Satin Nickel (Brushed) |
| Stile | Transitorio |
| Dimensioni del prodotto (L x P) | 19.9L x 14W centimetri |
| Peso dell'articolo | 2.06 kg |
| Tipo di maniglia | Pull Handle (Exterior), Lever (Interior) |
| Tipo di blocco | Key Lock (Note: Handleset itself does not include deadbolt) |
| Orientamento della mano | Universale |
| Caratteristica speciale | Facile da installare |
8. Garanzia e supporto
Garanzia del produttore: This Weiser product is backed by a Lifetime Limited Warranty. For specific details regarding coverage and terms, please refer to the warranty information provided with your purchase or visit the official Weiser websito.
Assistenza clienti: If you require further assistance with installation, operation, or troubleshooting, please contact Weiser customer support.
- Produttore: Bianco
- Informazioni sui contatti: MISSISSAUGA, ON, L5W 0G7 CA (Refer to Weiser's official website for current contact methods like phone or email.)
- Risorse online: Visitare il Weiser Store on Amazon per ulteriori prodotti e informazioni.