Introduzione
Thank you for choosing the Anjou 500ml Essential Oil Diffuser. This device is designed to enhance your environment with soothing aromatherapy and humidification. Featuring a large capacity, quiet operation, and intelligent controls, it provides a consistent and pleasant experience. Please read this manual thoroughly before use to ensure proper operation and maintenance.

Figure 1: Anjou 500ml Essential Oil Diffuser, a sleek white, teardrop-shaped device with control buttons and an LED light strip at its base.
Componenti del prodotto
The Anjou Essential Oil Diffuser package includes the following items:
- 1 x diffusore di oli essenziali Anjou (modello: AJ-AD012)
- 1 x cavo di alimentazione CA.
- 1 misurino piegato
- 1 x Manuale d'uso
Note: The round rubber object found in the bottom of the box is a collapsible cup for filling the diffuser.
Impostare
Follow these steps for the initial setup of your diffuser:
- Posizionare il diffusore: Position the diffuser on a flat, stable surface away from direct sunlight or heat sources.
- Rimuovere la copertura: Sollevare delicatamente il coperchio superiore del diffusore.
- Aggiungere acqua: Using the provided measuring cup, fill the water tank with clean tap water up to the maximum water level line (500ml). Do not exceed the MAX line.
- Aggiungi olio essenziale: Add 30-40 drops (approximately 1.5ml) of your preferred essential oil directly into the water tank. The patented OneFill technology ensures consistent scent for 11-15 hours in low mode and 6-10 hours in high mode with a single fill.
- Sostituire la copertura: Riposizionare saldamente il coperchio superiore sul diffusore.
- Connetti alimentazione: Plug the AC power cord into the diffuser's power input port, then plug the adapter into a standard wall outlet.

Figura 2: Un trasparente view of the Anjou diffuser, emphasizing its 500ml large water capacity, which allows for extended operation times of up to 15 hours.

Figure 3: An internal cutaway diagram of the Anjou diffuser, illustrating its patented oil flow system designed to create a constant and lasting aroma by efficiently distributing essential oils.
Istruzioni per l'uso
Your Anjou diffuser features intuitive controls for mist and light functions:

Figure 4: A visual representation highlighting the Anjou diffuser's ultra-quiet operation, rated at less than 30dB, making it suitable for bedrooms and quiet environments.
Controllo della nebbia
- Accensione/spegnimento: Premere il pulsante di accensione (⏻) once to turn on the diffuser. Press again to turn off.
- Regola la modalità nebbia: While the diffuser is on, press the power button (⏻) repeatedly to cycle between mist modes:
- First press: High Mist Mode (6-10 hours run time)
- Second press: Low Mist Mode (11-15 hours run time)
- Imposta timer: Premere il pulsante del timer (◷) repeatedly to set the operating time:
- 1H (1 hour)
- 4H (4 hours)
- 8H (8 hours)
- ON (Continuous operation until water runs out)

Figure 5: An image depicting the Anjou diffuser in operation, illustrating the two available mist modes: a high mist setting for stronger diffusion (6-10 hours) and a low mist setting for gentler diffusion (11-15 hours).
Controllo della luce a LED
- Accendere/Spegnere la luce: Premere il pulsante della luce (☀) once to turn on the LED light. Press again to turn off.
- Colori del ciclo: With the light on, press the light button (☀) repeatedly to cycle through the 7 available colors.
- Imposta luminosità: Some models allow adjusting brightness. Refer to the specific light button functionality for 100% or 50% brightness options if available.

Figure 6: The Anjou diffuser displaying its control panel with icons for timer settings (1h, 4h, 8h, ON), mist brightness (100%/50%), and power (OFF/ON), along with a colorful LED light spectrum.
Manutenzione
Regular cleaning ensures optimal performance and extends the lifespan of your diffuser. Always unplug the diffuser before cleaning.
Manutenzione giornaliera
- Svuotare l'acqua rimanente dal serbatoio.
- Pulire l'interno del serbatoio dell'acqua con un panno pulito e morbido.
- Refill with fresh water for the next use.
Pulizia settimanale
- Scollegare il diffusore e rimuovere il coperchio.
- Svuotare l'acqua rimanente.
- Aggiungere 1 cucchiaio di aceto bianco al serbatoio dell'acqua.
- Fill the tank with clean water up to about half capacity.
- Run the diffuser for 10-15 minutes to allow the vinegar to clean the ultrasonic plate.
- Drain the water and wipe the tank thoroughly with a soft cloth.
- Rinse the tank with clean water to remove any vinegar residue.
- Pulisci l'esterno del diffusore con un panno morbido eamp stoffa.
Note: Do not use corrosive detergents or harsh chemicals, as they may damage the diffuser. The BPA-free material is easy to clean.
Risoluzione dei problemi
Se riscontri problemi con il diffusore, consulta i seguenti problemi comuni e le relative soluzioni:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna nebbia o nebbia debole | Insufficient water; Water level too high; Ultrasonic plate dirty; Air inlet blocked. | Add water to appropriate level; Do not exceed MAX line; Clean ultrasonic plate; Ensure air inlet is clear. |
| Il diffusore non si accende | No power; Diffuser not plugged in correctly; Auto shut-off activated. | Check power connection; Ensure adapter is securely plugged in; Refill water tank if empty. |
| Rumore insolito | Insufficient water; Diffuser not on a flat surface. | Add water; Place diffuser on a stable, flat surface. |
| Luce non funzionante | Light function not activated; Malfunction. | Press the light button; If issue persists, contact customer support. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Modello | AJ-AD012 |
| Ingresso | 100-240 V ~ 50 / 60 Hz |
| Produzione | 24.0V ⎓ 0.50A |
| Energia | 10W ± 20% |
| Capacità idrica | 500 millilitri |
| Impostazioni del timer | 1H, 4H, 8H, ON |
| Luce LED | 7 colori |
| Modalità nebbia | Alto, basso |
| Materiale | ABS + PP (BPA Free) |
| Dimensioni (L x P x A) | 18L x 18W x 21.9H centimetri |
| Peso | 20 once |
| Caratteristiche speciali | Automatic Shut-Off, Cool Mist, Patented Oil Flow System, Whisper Quiet (<30dB) |
Garanzia e supporto
Anjou products are designed with quality and customer satisfaction in mind. For any questions, concerns, or warranty inquiries regarding your Anjou Essential Oil Diffuser, please contact Anjou customer support. Refer to the contact information provided on the product packaging or the official Anjou websito per assistenza.
Conservare la prova d'acquisto per eventuali richieste di garanzia.