1. Prodotto finitoview
The Hitachi BD-SG100EL is a drum-type washer dryer designed for efficient and convenient laundry care. It features a 10kg washing capacity and a 6kg wash-dry capacity, incorporating advanced technologies for superior cleaning and drying performance.
- Ferro da stiro a vento: Utilizes high-speed air, approximately 300 km/h, to reduce wrinkles during the drying cycle, minimizing the need for ironing.
- Pulizia automatica: The washing tub is automatically cleaned with fresh tap water after each rinse cycle, preventing mold and bacteria buildup in unseen areas.
- Sensor Big Drum Washing: This system detects the type and amount of laundry, adjusting drum rotation speed and water volume to maximize washing power and effectively remove dirt.
- Heat Recycle Drying: Reuses heat generated during operation for efficient drying, contributing to energy savings.

Figura 1: Fronte view of the Hitachi BD-SG100EL Drum-Type Washer Dryer.
2. Configurazione e installazione
2.1 Disimballaggio e controllo dei componenti
Prima dell'installazione, assicurarsi che tutti i componenti siano presenti:
- Unità principale
- One-touch faucet adapter
- Tubo di alimentazione dell'acqua (circa 0.8 m)
- Drain hose connection set
- Drain trap cover
- Tappi per le gambe (per la regolazione dell'altezza)
- Copertina
- Chiave per la rimozione dei bulloni di trasporto
- Transport bolts (pre-installed)
- Indicatore di livello
2.2 Requisiti di posizionamento
Proper placement is crucial for optimal performance and safety. Consider the following:
- Dimensioni: The external dimensions are approximately 630mm (width) x 715mm (depth) x 1050mm (height), including hoses and attachments. The main unit width is 600mm.
- Padella impermeabile: The unit fits into a waterproof pan with an inner depth of 540mm or more.
- Distanze: Ensure adequate space around the unit for ventilation and door opening. Refer to the diagram below for specific clearance requirements.

Figure 2: Installation and dimension guidelines. Ensure sufficient space for product dimensions, entrance, stairs, and waterproof pan. Allow 15cm above, 1cm behind, and 1cm to the left/right of the main unit. For door opening, allow 20-40cm in front.
2.3 Collegamento dei tubi flessibili
Connect the water supply and drain hoses securely. The drain hose length is 88cm for left outlet and 58cm for right outlet.

Figure 3: Water supply hose and drain hose. If the main unit already has a drain hose, only the water supply hose is included. The shape and color of the drain hose may vary and cannot be selected.
3. Istruzioni per l'uso
3.1 Basic Washing Cycle
- Accensione: Premere il pulsante di accensione per accendere la macchina.
- Caricare il bucato: Open the drum door and load your clothes. Do not overload the machine.
- Aggiungere detersivo/ammorbidente: Open the detergent dispenser and add the appropriate amount of detergent and fabric softener. The dispenser supports both powder and liquid detergents, as well as bleach.
- Seleziona il corso: Choose your desired washing course (e.g., Normal, Eco, Cotton, Wool, Quick).
- Inizio: Premere il pulsante Start per iniziare il ciclo.

Figure 4: Open drum for loading laundry.

Figure 5: Detergent and softener dispenser with dual compartments for powder/liquid detergent and softener.
3.2 Drying Cycles
The machine offers various drying options, including the