Manuale d'uso della smerigliatrice angolare Flex LBE 17-11 125

1. Prodotto finitoview

The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.

• Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
• Freno meccanico: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
• Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
• Motore ad alta capacità: Designed for high load capacity and efficiency, delivering strong power output.
• Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
• Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
• Design ergonomico: Compact and ergonomic form for comfortable handling.
• Regolazione della protezione senza attrezzi: The protective guard can be adjusted without the need for additional tools.
• SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.

2. Istruzioni di sicurezza

Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.

Sicurezza generale

• Indossare sempre dispositivi di protezione individuale (DPI) adeguati, tra cui occhiali di sicurezza, protezioni acustiche, guanti e maschera antipolvere.
• Assicurarsi che il pezzo sia saldamente clamped prima dell'operazione.
• Keep hands clear of rotating parts and the cutting/grinding area.
• Non utilizzare lo strumento in atmosfere esplosive, ad esempio in presenza di liquidi, gas o polvere infiammabili.
• Tenere lontani i bambini e gli astanti durante l'utilizzo di un elettroutensile.

Sicurezza elettrica

• Garantire l'alimentazione voltage matches the rating on the tool's nameplate.
• Non abusare del cavo. Non usare mai il cavo per trasportare, tirare o scollegare l'elettroutensile. Tenere il cavo lontano da calore, olio, bordi taglienti o parti in movimento.
• Se si utilizza un elettroutensile in modalità adamp Se la posizione è inevitabile, utilizzare un alimentatore protetto da dispositivo di corrente residua (RCD).

Specific Angle Grinder Safety

• Always use the protective guard. Ensure it is correctly positioned and securely fastened.
• Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
• Never use cutting discs for side grinding.
• Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
• Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.

3. Componenti e caratteristiche

Componenti chiave:

1. Corpo principale: Houses the motor, electronics, and gearbox.
2. Guardia protettiva: Adjustable, tool-free guard for user protection.
3. SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
4. Pulsante di blocco del mandrino: Per cambiare facilmente il disco.
5. Interruttore a scorrimento: Bloccabile per funzionamento continuo.
6. Speed Selection Dial: For variable speed control (see Figure 2).
7. Prese d'aria: For motor cooling and dust expulsion.

4. Impostazione

Attaching the SoftVib Handle

The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.

Montaggio della protezione protettiva

The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.

Installing the Grinding/Cutting Disc

1. Unplug the tool from the power supply.
2. Tenere premuto il pulsante di blocco del mandrino.
3. Posizionare il cl internoamping flangia sul mandrino.
4. Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
5. Avvitare il clamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
6. Rilasciare il pulsante di blocco del mandrino.

5. Istruzioni per l'uso

Accensione/spegnimento

• To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
• To switch off, release the slide switch. If locked, press the rear part of the switch to release it.

Controllo della velocità variabile

The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.

Using the Mechanical Brake

The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.

Working with the Grinder

• Tenere sempre saldamente il macinino con entrambe le mani.
• Allow the tool to reach full operating speed before contacting the workpiece.
• Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
• For cutting, use a slight rocking motion to prevent the disc from binding.
• Be mindful of sparks and debris. Direct them away from yourself and others.

6. Manutenzione

Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.

Pulizia

• Scollegare sempre lo strumento prima della pulizia.
• Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
• Pulisci l'esterno dello strumento con un pannoamp stoffa. Non utilizzare prodotti chimici aggressivi o detergenti abrasivi.

Spazzole di carbone

The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.

Magazzinaggio

Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.

7. Risoluzione Dei Problemi

8. Specifiche

9. Garanzia e supporto

Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.

Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex websul sito o sulla confezione del prodotto.