Importanti istruzioni di sicurezza
When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons. Read all instructions before using this fan.
- Always plug fans directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip).
- Non azionare alcun ventilatore con un cavo o una spina danneggiati. Smaltire il ventilatore o riportarlo a un centro di assistenza autorizzato per l'esame e/o la riparazione.
- Non far passare il cavo sotto la moquette. Non coprire il cavo con tappeti, passatoie o rivestimenti simili. Disporre il cavo lontano dall'area di passaggio e dove non ci si possa inciampare.
- Always unplug the fan before moving, servicing, or cleaning.
- Non inserire o consentire alle dita o a oggetti estranei di entrare nelle aperture di ventilazione o di scarico, poiché ciò potrebbe causare scosse elettriche o incendi, oppure danneggiare la ventola.
- Non bloccare in alcun modo le prese d'aria o lo scarico. Non utilizzare su superfici morbide, come un letto, dove le aperture potrebbero bloccarsi.
- Questa ventola non è destinata all'uso in ambienti umidi o damp posizioni.
- This fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined.
- This fan is not suitable for use in hazardous locations.
Cosa c'è nella scatola
Prima di iniziare il montaggio, verificare che tutti i componenti siano presenti.
- Lasko T48322 Tower Fan Unit
- Fan Base (two halves)
- Telecomando
- Viti di montaggio per la base
Installazione e assemblaggio
Follow these steps to assemble your Lasko T48322 Tower Fan.
- Assemblare la base: Carefully align the two halves of the fan base. Ensure the cable channel on one half matches the opening on the other. Snap them together.
- Attach Base to Fan: Place the assembled base onto the bottom of the tower fan unit. Align the screw holes.
- Proteggere la base: Insert the provided mounting screws through the base and into the fan unit. Tighten securely with a screwdriver. Do not overtighten.
- Posizionare il ventilatore: Place the fan on a firm, level surface. Ensure it is away from curtains or other objects that could obstruct airflow.
- Collegare: Insert the power cord into a 120V AC wall outlet.
Immagine: Frontale view of the Lasko T48322 Tower Fan. This image shows the fan's slim, upright design with its black and silver finish, and the digital display panel at the top.
Immagine: Indietro view of the Lasko T48322 Tower Fan, highlighting the integrated handle and the remote control storage slot.
Operazione
Your Lasko T48322 Tower Fan can be operated using the control panel on the top of the fan or with the included remote control.
Funzioni del pannello di controllo
Image: Close-up of the Lasko T48322 Tower Fan's control panel, showing the power, speed, timer, oscillation, and nighttime mode buttons, along with the digital speed display.
- Pulsante di accensione (⏻): Premere per accendere o spegnere la ventola.
- Pulsante di velocità (☸): Press repeatedly to cycle through the three fan speeds: Low (1), Medium (2), High (3). The current speed will be displayed on the digital screen.
- Pulsante di oscillazione (⌛): Press to activate or deactivate the oscillation function, which allows the fan to rotate from side to side, distributing air over a wider area.
- Pulsante Timer (⏱): Press to set the fan to automatically turn off after a set period. Each press increases the timer setting by 1 hour, up to a maximum of 8 hours. The selected time will be indicated by illuminated LEDs.
- Nighttime Mode Button (🌙): Press to activate Nighttime Mode. In this mode, the fan's speed will automatically decrease every hour until it reaches the lowest speed. The display lights will also dim for minimal disturbance.
Funzionamento del telecomando
Image: The remote control for the Lasko T48322 Tower Fan, showing buttons for power, speed, oscillation, timer, and nighttime mode.
The remote control duplicates all functions of the control panel. Ensure the remote has working batteries (typically 2 AAA batteries, not always included). Point the remote directly at the fan's control panel for optimal response.
Cura e manutenzione
Proper care and maintenance will ensure the longevity and efficient operation of your fan.
- Pulizia: Always unplug the fan before cleaning. Use a soft cloth moistened with a mild soap solution to clean the exterior surfaces. Do not use gasoline, benzene, thinner, harsh cleaners, etc., as they will damage the fan. Never immerse the fan in water.
- Rimozione della polvere: Utilizzare un aspirapolvere con spazzola per rimuovere la polvere dalle griglie di aspirazione e di scarico dell'aria.
- Magazzinaggio: When not in use, store the fan in its original carton in a cool, dry place. The remote control can be stored in the designated slot on the back of the fan.
- Manutenzione: This fan has permanently lubricated bearings and requires no further lubrication.
Risoluzione dei problemi
If your fan is not operating as expected, refer to the following common issues and solutions.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La ventola non si accende. | Nessuna alimentazione all'unità. | Ensure the power cord is securely plugged into a working 120V AC outlet. Check household circuit breaker/fuse. |
| Fan operates but air flow is weak. | Air intake/exhaust grilles are blocked or dusty. | Unplug the fan and clean the grilles using a vacuum cleaner with a brush attachment. Ensure no objects are obstructing airflow. |
| La ventola è rumorosa. | Loose parts or fan not on a level surface. | Ensure the fan is placed on a firm, level surface. Check if the base is securely attached. If noise persists, discontinue use and contact customer support. |
| Telecomando non funzionante. | Batterie scariche o ostruzioni. | Replace batteries in the remote control. Ensure there is no obstruction between the remote and the fan's control panel. |
Specifiche
- Modello: T48322
- Marca: Lasco
- Colore: Nero
- Fattore di forma: Torre
- Fonte di energia: Elettrico con cavo
- Voltage: 120 Volt (CA)
- Numero di livelli di potenza: 3
- Caratteristiche speciali: Oscillating, 8-Hour Timer, Nighttime Mode, Remote Control
- Componenti inclusi: Telecomando
- Utilizzo interno/esterno: Al chiuso
- Materiale: Metallo
Garanzia e supporto
Lasko Products, LLC warrants this product against defects in workmanship and/or materials for a period specified in the product's original packaging or on the official Lasko website. This warranty extends only to the original purchaser of the product.
For technical assistance, product information, or warranty claims, please contact Lasko Customer Service:
- Websito: www.lasko.com
- Telefono: Refer to the Lasko websito per i numeri di contatto attuali.
- E-mail: Refer to the Lasko websito per l'indirizzo email di contatto corrente.
Please have your model number (T48322) and purchase date available when contacting support.