Manuale d'uso del misuratore di pressione sanguigna aneroide singolo Pic Solution ClassicStethoMED con stetoscopio

Introduzione

This manual provides essential instructions for the safe and effective use of the Pic Solution ClassicStethoMED Single Aneroid Blood Pressure Monitor with Stethoscope. Please read this manual thoroughly before first use and keep it for future reference.

The Pic Solution ClassicStethoMED is a mechanical aneroid blood pressure monitor designed for professional and home use. It includes a clear, highly readable manometer, a comfortable cuff with a pull-ring and Velcro for easy fitting, and a stethoscope for auscultation during arterial blood pressure measurement. A fabric case is provided for convenient transport and organized storage of all components.

Informazioni importanti sulla sicurezza

Always consult a healthcare professional for diagnosis and treatment of high blood pressure. Self-measurement is for monitoring purposes only and does not replace medical consultation.

• Do not use this device on infants or individuals unable to communicate.
• Do not use this device in an environment where high-frequency surgical equipment or magnetic resonance imaging (MRI) equipment is present.
• Evitare i forti campi elettromagnetici.
• Tenere fuori dalla portata dei bambini.
• Non smontare o modificare il dispositivo.
• Ensure the cuff size is appropriate for the user's arm circumference.

Cosa c'è nella scatola

La confezione contiene i seguenti componenti:

• Aneroid Blood Pressure Monitor (Manometer and Inflation Bulb)
• Bracciale
• Stetoscopio
• Borsa portaoggetti
• Manuale di istruzioni

Image: This image displays all the components included with the Pic Solution ClassicStethoMED blood pressure monitor: the aneroid gauge, inflation bulb, arm cuff, stethoscope, and a blue fabric storage bag.

Installazione e assemblaggio

1. Collegare il bracciale: Ensure the air tube from the cuff is securely connected to the manometer.
   

   Immagine: Un dettaglio view of the aneroid manometer connected to the blue arm cuff and the black inflation bulb, illustrating the main measurement unit.

2. Stethoscope Assembly: The stethoscope is typically pre-assembled. Ensure the earpieces are clean and the diaphragm is intact.
   

   Image: This image provides a close-up of the stethoscope's chest piece (diaphragm) and part of its tubing, highlighting its design for auscultation.

Istruzioni per l'uso

Preparazione per la misurazione

• Riposare per almeno 5 minuti prima della misurazione.
• Avoid eating, drinking caffeine, smoking, or exercising for 30 minutes prior.
• Sedersi in una posizione comoda con la schiena appoggiata e i piedi appoggiati sul pavimento.
• Posizionare il braccio su una superficie piana in modo che il bracciale sia all'altezza del cuore.

Applicazione del polsino

1. Slide the cuff onto your bare upper arm, ensuring the lower edge is about 2-3 cm above the elbow joint.
   

   Image: A person demonstrating the correct placement of the blood pressure cuff on the upper arm, positioned just above the elbow for accurate measurement.
2. Tighten the cuff using the Velcro closure, ensuring it is snug but not overly tight. You should be able to insert two fingers comfortably under the cuff.
3. Position the manometer so it is easily visible.

Prendere una Misurazione

1. Place the stethoscope diaphragm over the brachial artery in the crook of your elbow.
2. Close the air release valve on the inflation bulb by turning it clockwise.
3. Rapidly inflate the cuff by squeezing the bulb until the manometer reads about 20-30 mmHg above your usual systolic pressure, or until the pulse sound disappears.
4. Slowly open the air release valve (counter-clockwise) to deflate the cuff at a rate of 2-3 mmHg per second.
5. Listen carefully through the stethoscope for the first faint, tapping sound (Korotkoff sound). This is your systolic pressure. Note the reading on the manometer.
6. Continue deflating the cuff. The sounds will become louder, then muffled, and finally disappear. The point at which the sounds completely disappear is your pressione diastolica. Note this reading.
7. Once the sounds have disappeared, quickly deflate the cuff completely.
8. Record your measurements.

Cura e manutenzione

• Pulizia: Wipe the manometer, inflation bulb, and stethoscope with a soft, damp cloth. Use a mild disinfectant if necessary. Do not immerse any part of the device in water.
• Cuff Cleaning: The cuff can be gently hand-washed with mild soap and water. Allow it to air dry completely before storage.
• Magazzinaggio: Store the device in its provided fabric case in a cool, dry place, away from direct sunlight and extreme temperatures.
• Calibrazione: Aneroid blood pressure monitors should be checked for accuracy and calibrated periodically, typically every 1-2 years, by a qualified technician.

Image: The blue fabric storage case with the Pic Solution logo, designed to hold and protect all components of the blood pressure monitor for transport and storage.

Risoluzione dei problemi

Specifiche

• Nome modello: Pic Solution ClassicStethoMED
• Numero modello: 02021402000000
• Tipo: Aneroid Blood Pressure Monitor with Stethoscope
• Tipo di visualizzazione: Analogico
• Dimensioni del prodotto: Dimensioni: 18.8 x 7.87 x 11.18 cm
• Peso dell'articolo: 360 grammi
• Componenti inclusi: Aneroid monitor, flat stethoscope, transport bag, manual
• Fascia d'età prevista: Adulto
• Paese di origine: Italia

Garanzia e supporto

For warranty information, technical support, or service inquiries, please refer to the contact details provided on the product packaging or visit the official Pic Solution websito.

This device is a CE Medical Device (0068). Please read the warnings and instructions for use carefully.

Manufacturer: Pikdare S.p.A.