Introduzione
This manual provides detailed instructions for the safe and effective use of your Oasser T1 Digital LCD Breathalyzer Alcohol Tester. Please read this manual thoroughly before operating the device and retain it for future reference. This device is designed to estimate blood alcohol content (BAC) for personal reference only and should not be used to determine whether it is safe to operate a vehicle or machinery.
Informazioni sulla sicurezza
- Do not operate the device immediately after consuming alcohol. Wait at least 20 minutes after drinking, eating, or smoking to ensure accurate readings. Residual alcohol in the mouth can lead to inaccurate results.
- This device provides an estimate of BAC for personal reference only. It is not a legal instrument and should not be relied upon to determine fitness to drive or perform tasks requiring sobriety.
- Tenere il dispositivo fuori dalla portata dei bambini.
- Avoid using the device in strong winds, smoke, or highly polluted environments, as this may affect accuracy.
- Do not attempt to disassemble or repair the device yourself. Contact customer support if the device malfunctions.
- Use only specified batteries (3 AAA). Ensure correct polarity when inserting batteries.
Contenuto della confezione
Verifica che tutti gli articoli siano presenti nel tuo pacco:
- Oasser T1 Digital LCD Breathalyzer
- 4 x Mouthpieces
- 3 batterie AAA
- Manuale d'uso
Image: Contents of the Oasser T1 Breathalyzer package, showing the device, user manual, four mouthpieces, and the product box.
Prodotto finitoview
The Oasser T1 Breathalyzer features a compact design with an easy-to-read digital LCD display and a semi-conductor sensor for alcohol detection.
Immagine: Frontale view of the Oasser T1 Breathalyzer, displaying "0.00 %BAC" on its digital LCD screen, alongside four transparent mouthpieces.
Componenti:
- Porta del bocchino: Where the disposable mouthpiece is inserted.
- Schermo LCD: Shows BAC readings, battery status, and operational prompts.
- Pulsante di accensione: Used to turn the device on/off and initiate testing.
- Vano batteria: Located on the back, holds 3 AAA batteries.
Impostare
- Installa le batterie: Aprire il coperchio del vano batterie sul retro del dispositivo. Inserire 3 batterie AAA, assicurandosi della corretta polarità (+/-). Chiudere bene il coperchio.
- Fissare il bocchino: Select one of the provided mouthpieces. Insert it firmly into the mouthpiece port located on the top edge of the breathalyzer.
Image: A hand holding the Oasser T1 Breathalyzer with a mouthpiece already inserted, demonstrating how to attach it. Three spare mouthpieces are visible next to the device.
Istruzioni per l'uso
Follow these steps for an accurate breath alcohol test:
- Accensione: Press and hold the power button for approximately 1 second. The device will emit a beep, and the LCD display will light up.
- Riscaldamento: The device will display "WARM UP" and count down from 10 to 0. This indicates the sensor is preparing for testing.
- Avvia test: Once the warm-up is complete, the device will display "BLOW" and count down from 10 to 0. During this time, take a deep breath.
- Blow into Mouthpiece: Place your lips around the mouthpiece and blow steadily and continuously for about 5 seconds until you hear a beep. Ensure no air escapes from the sides of your mouth.
- View Risultati: After blowing, the device will process the sample and display your estimated BAC on the LCD screen. The result will be shown for approximately 10 seconds.
- Spegni: The device will automatically power off after displaying the result for a few seconds, or you can press and hold the power button to turn it off manually.
Image: A man demonstrating the use of the Oasser T1 Breathalyzer while seated in a car, blowing into the attached mouthpiece.
Understanding Results
The Oasser T1 Breathalyzer displays results in %BAC (Blood Alcohol Content). The interpretation of these results is for informational purposes only.
- 0.00% BAC: Indicates no alcohol detected.
- Low BAC Readings: Small amounts of alcohol detected.
- Higher BAC Readings: Indicates increased alcohol presence.
Important: Legal limits for driving vary by region. A low reading does not guarantee that you are fit to drive or that you are below the legal limit. Always exercise caution and responsible judgment.
Manutenzione
- Pulizia: Pulire l'esterno del dispositivo con un panno morbido, damp stoffa. Non utilizzare detergenti abrasivi né immergere il dispositivo in acqua.
- Bocchini: The provided mouthpieces are reusable after cleaning. Wash them with warm water and mild soap, then rinse thoroughly and allow them to air dry completely before reuse. Replace mouthpieces if they show signs of wear or damage.
- Magazzinaggio: Store the breathalyzer in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries if the device will not be used for an extended period to prevent leakage.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il dispositivo non si accende. | Batterie scariche o inserite in modo errato. | Sostituire le batterie con nuove batterie AAA, assicurandosi della corretta polarità. |
| Letture imprecise o incoerenti. |
|
|
| "Err" o altro messaggio di errore sul display. | Sensor malfunction or improper operation. | Turn off the device, wait a few minutes, and try again. If the error persists, contact customer support. |
Specifiche
| Caratteristica | Dettaglio |
|---|---|
| Tipo di sensore | Semi-conductor alcohol sensor |
| Display | LCD digitale con retroilluminazione |
| Campo di misura | 0.00 - 0.19% BAC (or equivalent) |
| Potenza in ingresso | 3 batterie alcaline AAA da 1.5 V |
| Temperatura di esercizio | 10°C - 50°C (50°F - 122°F) |
| Temperatura di conservazione | 0°C - 40°C (32°F - 104°F) |
| Dimensioni | Circa 110 mm x 60 mm x 20 mm (4.33 pollici x 2.36 pollici x 0.79 pollici) |
| Peso | Circa 6.08 once (con batterie) |
Image: The Oasser T1 Breathalyzer positioned next to a smartphone, illustrating its compact size and providing specific dimensions for length, width, and thickness.
Garanzia e supporto
Oasser products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official Oasser websito.
Conservare la prova d'acquisto per eventuali richieste di garanzia.