Meike MK-MT24II

Meike MK-MT24II Macro Close-up Twin Lite Flash User Manual

Model: MK-MT24II

Introduzione

The Meike MK-MT24II Macro Close-up Twin Lite Flash system is designed for macro photography, providing versatile and precise lighting control. This system includes a TTL transceiver and two remote flash units, offering flexible positioning and advanced synchronization capabilities for various camera models.

Contenuto della confezione

Verifica che tutti gli articoli elencati di seguito siano inclusi nel tuo pacchetto:

1 x MK-GT620 TTL Transceiver
6 x Adapter Rings (52mm, 55mm, 62mm, 67mm, 72mm, 77mm)
2 x MK-R200 Remote Flash Units

Contents of the Meike MK-MT24II package — Image: All components included in the Meike MK-MT24II Macro Twin Lite Flash package, neatly arranged with their carrying case and box.

Guida all'installazione

1. Installazione della batteria

The MK-R200 remote flash units and the MK-GT620 TTL transceiver require AA/AAA Ni-MH batteries (not included). Ensure correct polarity when inserting batteries.

MK-R200 Flash Units: Each requires 2x AAA Ni-MH batteries.
MK-GT620 Transceiver: Requires 2x AA Ni-MH batteries.

2. Attaching the Transceiver to Camera

Slide the MK-GT620 TTL transceiver onto your camera's hot shoe mount until it clicks into place. Secure it if your camera's hot shoe has a locking mechanism.

Meike MK-R200 flash units and MK-GT620 transceiver — Immagine: Primo piano view of the MK-R200 remote flash units and the MK-GT620 TTL transceiver, showing their controls and battery compartments.

3. Attaching Flash Units to Lens

Select the appropriate adapter ring (52mm, 55mm, 62mm, 67mm, 72mm, or 77mm) that matches your camera lens filter thread. Screw the adapter ring onto the front of your lens. Then, attach the main ring to the adapter ring. Finally, slide the two MK-R200 remote flash units onto the main ring, positioning them as desired.

Meike MK-MT24II components including adapter rings and main ring — Image: The Meike MK-MT24II system components, including the two flash units, the main ring, and various adapter rings for different lens sizes.

Meike MK-MT24II Macro Twin Lite Flash mounted on a camera lens — Image: The Meike MK-MT24II Macro Twin Lite Flash system fully assembled on a camera, showing the two flash heads attached to the lens via the adapter ring.

Istruzioni per l'uso

1. Powering On and Linking

Turn on both the MK-GT620 transceiver and the MK-R200 flash units. They should automatically link. Ensure the ID is set to the default 0000 for initial setup.

2. Group and Channel Settings

The system supports 4 channels and 3 groups (A/B/C). Both the transceiver and flash units must be set to the same channel. You can assign different power levels to each group, allowing for precise lighting control.

Diagram showing Meike MK-MT24II setup with groups A and B — Image: A diagram illustrating the wireless connection between the MK-GT620 transceiver and two MK-R200 flash units, labeled Group A and Group B, indicating their independent control.

3. Flash Mode and Intensity Adjustment

The MK-MT24II supports TTL (Through-The-Lens) automatic flash metering. You can also manually adjust flash intensity with 7 levels (1/64 to 1/1 output). The R200 units can rotate 60° horizontally and 45° vertically for flexible light positioning.

Advanced features include High Speed Sync, Front-curtain Sync, FE lock, and Rear-curtain Sync, accessible through your camera's menu.

Photographer using Meike MK-MT24II flash for outdoor macro photography — Image: A photographer in a field, kneeling and using the Meike MK-MT24II flash system attached to their camera for macro photography, demonstrating its outdoor application.

Creative lighting example with Meike flash on colorful bottles — Immagine: Un example of creative lighting using the Meike flash system to illuminate a series of colorful bottles, showcasing its ability to produce vibrant and controlled light.

Manutenzione

Pulizia

Wipe the flash units and transceiver with a soft, dry cloth. Do not use solvents or abrasive cleaners. Keep the hot shoe contacts clean to ensure proper communication with the camera.

Magazzinaggio

When not in use for extended periods, remove batteries from all units to prevent leakage. Store the system in a cool, dry place, away from direct sunlight and extreme temperatures.

Cura della batteria

Use high-quality Ni-MH rechargeable batteries for optimal performance and recycle time. Fully charge batteries before use. Battery life will vary based on flash power output and usage frequency.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
Flashes not firing	Batterie scariche o esaurite. Unità non accese. Impostazioni canale/gruppo errate. Poor hot shoe connection.	Sostituire o ricaricare le batterie. Assicurarsi che tutte le unità siano accese. Verify transceiver and flashes are on the same channel and group. Clean hot shoe contacts and ensure transceiver is fully seated.
Long recycle time	Batteria scarica. Using non-rechargeable or low-capacity batteries.	Ricaricare o sostituire le batterie. Utilizzare batterie ricaricabili Ni-MH di alta qualità.
Potenza flash incoerente	Interferenze da altri dispositivi wireless. Flashes too far from transceiver. Ostruzioni tra le unità.	Cambia canale. Reduce distance between units (stable within 15m). Assicurare una visuale libera.

Specifiche

Caratteristica	Dettaglio
Numero guida	10 (ISO 100.m), 14 (ISO 200.m)
Luce LED	0.5W, 5500K±200, Ra 90
Gruppi e canali	Group A/B/C, Channels 1/2/3/4
ID wireless	Predefinito 0000
S1/S2 Transmission Distance	Indoor >20m, Outdoor >10m
Distanza di controllo wireless	Stable within 15m (alignment >100m in open environment)
Cover Angle	Covers light of 24mm lens
Riciclare il tempo	4s (1/1 output, 2.4-2.8V)
Battery (R200)	2x AAA Ni-MH (not included)
Battery (GT620)	2x AA Ni-MH (not included)
R200 Weight	Circa 105 g
R200 Dimensions (LWH)	806075mm
Temperatura di esercizio	-10°C a 50°C
Temperatura di conservazione	-20°C a 70°C
Velocità di sincronizzazione del flash	1/200 o 1/250

Compatibilità

The Meike MK-MT24II Macro Close-up Twin Lite Flash is compatible with a wide range of cameras, including:

EF-Mount Digital SLR Cameras: EOS Rebel T6s, T6i, T6, T5i, T4i, T3i; EOS 60D, 70D, 80D; EOS 7D, 7D MK II; Rebel T5i, T4i, T3i, T3, T2i, T1i, XSi, XTi, SL1; EOS 700D, 650D, 600D, 1100D, 550D, 500D, 450D, 400D, 100D, 300D; 5D, 5D4, 6D, 7D, etc.
RF Mount Mirrorless Cameras: EOS R, EOS RP.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.