Aquaguard I-NOVA/Infinity UV Water Purifier Filter Set

1. Prodotto finitoview

This document provides instructions for the Aquaguard Original I-NOVA Filter Set, designed for specific Eureka Forbes UV water purifier models. The set includes an Activated Carbon Block and a Water Filter Cartridge (DIY Candle) essential for maintaining water purification performance.

Compatibilità: This filter set is exclusively designed for Aquaguard UV I-NOVA and Infinity water purifier models.

2. Componenti inclusi

• Blocco di carbone attivo: Filters out organic impurities, chlorine, and improves water taste and odor.
• Water Filter Cartridge (DIY Candle): Acts as a sediment filter, removing suspended particles like dirt, sand, and rust.

Image 1: The Aquaguard Original I-NOVA Filter Set, featuring both the activated carbon block and the water filter cartridge.

3. Configurazione e installazione

Replacing the filter cartridges is a DIY process. For detailed steps, always refer to your specific Aquaguard UV I-NOVA or Infinity water purifier's user manual. The general procedure involves:

1. Spegnimento e disconnessione: Ensure the water purifier is switched off and unplugged from the power outlet. Turn off the main water supply to the purifier.
2. Scaricare l'acqua: Open the purified water tap to drain any remaining water from the system.
3. Locate Filter Housings: Identify the housings for the Activated Carbon Block and the Water Filter Cartridge within your purifier.
4. Rimuovi i vecchi filtri: Carefully unscrew or unclip the filter housings. Remove the used Activated Carbon Block and Water Filter Cartridge. Dispose of them responsibly.
5. Inserisci nuovi filtri: Insert the new Activated Carbon Block and Water Filter Cartridge into their respective housings. Ensure they are seated correctly and securely.
6. Alloggiamenti sicuri: Re-attach and tighten the filter housings. Ensure all connections are secure to prevent leaks.
7. Ripristinare acqua ed energia: Slowly turn on the main water supply to the purifier. Check for any leaks. Once confirmed, plug in and switch on the power.
8. Sistema di scarico: Allow water to run through the purifier for a few minutes (as per your purifier's manual) to flush out any air or carbon fines before consuming.

Image 2: Left: Activated Carbon Block. Right: Water Filter Cartridge (DIY Candle).

4. Principi operativi

These filters are integral to the multi-stage purification process of your Aquaguard UV water purifier:

• IL Water Filter Cartridge (DIY Candle) typically acts as the first stage, physically removing larger suspended impurities from the incoming water.
• IL Blocco di carbone attivo then processes the pre-filtered water, adsorbing chlorine, organic compounds, pesticides, and other chemicals that can affect water taste and odor. This stage prepares the water for subsequent UV purification.

Together, these filters ensure that the water entering the UV chamber is free from sediment and chemical contaminants, allowing the UV lamp to effectively neutralize microorganisms.

5. Manutenzione e sostituzione

Regular replacement of these filters is crucial for the optimal performance and longevity of your Aquaguard water purifier and for ensuring safe drinking water.

• Frequenza di sostituzione: The lifespan of the filters depends on the quality of your input water and the volume of water purified. Typically, filters should be replaced every 6 to 12 months, or as indicated by your water purifier's filter change alarm or indicator.
• Signs of Exhausted Filters: Reduced water flow, unusual taste or odor in the purified water, or a visible change in the filter's appearance (for the candle filter) can indicate that replacement is due.
• DIY Replacement: The design of these filters facilitates easy, do-it-yourself replacement. Follow the installation steps outlined in Section 3.

6. Risoluzione Dei Problemi

If you encounter issues after filter replacement, consider the following:

• Flusso d'acqua ridotto: Ensure the filters are correctly seated and not clogged. Sometimes, new carbon filters may release air, causing temporary flow reduction. Flush the system thoroughly.
• Perdite: Check all connections and O-rings for proper sealing. Ensure filter housings are tightened securely but not overtightened.
• Sapore/odore insolito: Flush the system for a longer period (5-10 minutes) to remove any residual carbon fines. If the issue persists, re-check filter installation or consider if the filters might be faulty.
• Purifier Not Functioning: Verify that the power supply is connected and switched on. Ensure the water supply is open.

7. Specifiche

8. Garanzia e supporto

Specific warranty information for this filter set is not provided. For any product-related queries, technical assistance, or to purchase genuine replacement parts, please contact Eureka Forbes customer support or visit their official website. Always use genuine Aquaguard replacement filters to ensure optimal performance and to maintain your water purifier's warranty.