Manuale di istruzioni per Nerf Modulus Ghost Ops Shadow ICS-6

Informazioni importanti sulla sicurezza

ATTENZIONE: PERICOLO DI SOFFOCAMENTO - Potrebbero essere generate piccole parti. Non adatto a bambini di età inferiore a 3 anni.

Do not aim at eyes or face. Use only official NERF darts. Other darts may not meet safety standards. Do not modify darts or blaster.

Si consiglia la supervisione di un adulto durante l'uso.

1. Impostazione

1.1 Disimballaggio

Rimuovere con attenzione tutti i componenti dall'imballaggio. Assicurarsi che siano presenti tutti i componenti elencati nella sezione "Contenuto della confezione".

• Esplosione
• Barrel Extension
• 6 Freccette
• Istruzioni

Image 1.1: The Nerf Modulus Ghost Ops Shadow ICS-6 blaster and its components as seen in the retail packaging.

1.2 Installazione della batteria

The blaster requires 3 AAA alkaline batteries for the illumination feature. Demo batteries are included.

1. Individuare il vano batteria sul blaster.
2. Utilizzando un cacciavite a croce (non incluso), svitare il coperchio del vano batteria.
3. Inserire 3 nuove batterie alcaline AAA, assicurandosi della corretta polarità (+/-).
4. Riposizionare il coperchio del vano batteria e fissarlo con la vite.

Image 1.2: The blaster's battery requirement for its illumination feature.

1.3 Assembling the Blaster

The Illuminator Barrel can be attached to the front of the blaster.

1. Align the barrel extension with the front attachment point of the blaster.
2. Push the barrel extension firmly until it clicks into place.
3. To remove, press the release button (if present) or pull the barrel extension off.

Image 1.3: Attaching the illuminator barrel to customize the blaster.

Image 1.4: Detaching the illuminator barrel from the blaster.

2. Funzionamento del blaster

2.1 Caricamento dei dardi

The Shadow ICS-6 blaster features a breech-load design with an internal clip system that holds up to 6 darts.

1. Open the breech by pulling back the priming handle.
2. Insert one dart at a time into the internal clip system. Ensure darts are fully seated.
3. Close the breech by pushing the priming handle forward until it locks.

Image 2.1: Loading a dart into the blaster's internal clip system.

Immagine 2.2: Dettagliata view of dart loading.

2.2 Sparare con il blaster

Once darts are loaded and the blaster is primed:

1. Aim the blaster at a safe target.
2. Pull the trigger to fire one dart.
3. To fire another dart, repeat the loading and priming steps.

Image 2.3: The blaster and included darts.

2.3 Illumination Feature

The blaster features a clear housing that illuminates when the light activator is pressed. This allows for both stealth and illuminated modes.

• Modalità invisibile: Keep the blaster clear (lights off) for discreet action.
• Illuminated Mode: Press the light activator button to illuminate the blaster, useful for low-light environments. The attached Illuminator Barrel will also light up.

Image 2.4: The blaster in illuminated mode.

Image 2.5: The blaster in clear, stealth mode.

Image 2.6: The illuminator barrel glowing when attached.

3. Manutenzione

3.1 Cura generale

• Keep the blaster clean by wiping it with a dry cloth. Do not use harsh chemicals or immerse in water.
• Store the blaster in a cool, dry place away from direct sunlight.
• Remove batteries if the blaster will not be used for an extended period to prevent leakage.

3.2 Cura delle freccette

• Use only official Nerf darts to ensure optimal performance and safety.
• Inspect darts for damage before use. Damaged darts can affect performance and potentially jam the blaster.
• Do not modify darts.

4. Risoluzione Dei Problemi

5. Specifiche