Intelbras IWR 3000N Wireless-N 300 Mbps Router User Manual

1. Introduzione

This manual provides detailed instructions for the installation, configuration, and operation of your Intelbras IWR 3000N Wireless-N 300 Mbps Router. Please read this manual carefully before using the device to ensure proper functionality and safety. The IWR 3000N router is designed to provide reliable Wi-Fi connectivity for your home or small office network, offering speeds up to 300 Mbps and various features to manage your internet access.

2. Informazioni sulla sicurezza

• Assicurarsi che il router sia posizionato in un'area ben ventilata per evitare il surriscaldamento.
• Non esporre il dispositivo ad acqua, umidità o temperature estreme.
• Use only the power adapter supplied with the router. Using an incorrect adapter may damage the device and void the warranty.
• Tenere il dispositivo lontano da forti campi elettromagnetici.
• Do not attempt to open or repair the router yourself. Contact qualified personnel for service.
• Tenere fuori dalla portata dei bambini.

3. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• Intelbras IWR 3000N Wireless-N 300 Mbps Router
• Adattatore di alimentazione
• Cavo Ethernet
• Guida di installazione rapida

4. Prodotto finitoview

4.1 Pannello frontale

The front panel of the router features LED indicators that provide information about the device's status.

Figura 1: Fronte view of the Intelbras IWR 3000N router, showing the Intelbras logo and status LEDs for power, WAN, LAN, and Wi-Fi activity.

• LED di potenza: Indica se il router è acceso.
• LED WAN: Indicates connection status to the internet (Wide Area Network).
• LED LAN (1-4): Indica l'attività sulle porte LAN cablate.
• LED WLAN: Indica l'attività della rete wireless.

4.2 Pannello posteriore

The rear panel contains all the physical connection ports and buttons.

Figura 2: Posteriore view of the Intelbras IWR 3000N router, displaying the power input, WPS/Reset button, WAN port (blue), and four LAN ports (yellow).

• Potenza in ingresso: Collegare qui l'adattatore di alimentazione in dotazione.
• Pulsante WPS/Reset: Press briefly for WPS function. Press and hold for 5-10 seconds to factory reset the router.
• Porta WAN (blu): Connect your modem or internet service provider's cable here.
• Porte LAN (giallo, 1-4): Collega dispositivi cablati come computer, console di gioco o smart TV.
• antenne: Two external 5 dBi antennas for wireless signal transmission and reception.

5. Impostazione

5.1 connessione fisica

1. Posizionare il router: Place the router in a central location in your home or office, away from obstructions and sources of interference (e.g., microwaves, cordless phones).
2. Collegare il modem: Connect one end of an Ethernet cable to the WAN port (blue) on the router and the other end to the LAN port on your modem.
3. Connetti alimentazione: Connect the power adapter to the router's power input and then plug it into an electrical outlet. The Power LED should illuminate.
4. Collegare dispositivi cablati (facoltativo): If you have wired devices, connect them to the yellow LAN ports (1-4) on the router using Ethernet cables.
5. Attendi l'inizializzazione: Allow a few minutes for the router to power on and initialize. The WAN LED should eventually turn solid, indicating an internet connection.

5.2 Initial Configuration (Router Mode)

To configure the router, you can use a computer connected via Wi-Fi or Ethernet.

1. Connettiti al router:
   • Wired: Connect your computer to one of the yellow LAN ports (1-4) on the router using an Ethernet cable.
   • Senza fili: On your computer or mobile device, search for available Wi-Fi networks. Connect to the network named "Intelbras_IWR3000N" (or similar, check the label on the bottom of the router). The default password is also on the label.
2. Accedi al Web Interfaccia: Aprire un web browser (e.g., Chrome, Firefox, Edge) and type the default IP address 10.0.0.1 or 192.168.1.1 (check the router label for the exact address) into the address bar, then press Enter.
3. Login: Enter the default username and password. Typically, both are amministratore. Refer to the router's label if these credentials do not work.
4. Esegui la procedura guidata di configurazione rapida: Upon successful login, the router's quick setup wizard should appear. Follow the on-screen instructions to configure your internet connection (e.g., PPPoE, Dynamic IP, Static IP) and set up your Wi-Fi network name (SSID) and password.
5. Salva impostazioni: Dopo aver completato la procedura guidata, salva le impostazioni. Il router potrebbe riavviarsi.
6. Riconnetti: If you changed the Wi-Fi network name or password, reconnect your wireless devices to the new network.

6. Modalità operative

The Intelbras IWR 3000N supports multiple operating modes to suit different network requirements.

6.1 Modalità router

This is the default mode, where the device acts as the primary gateway for your network, connecting to the internet via the WAN port and distributing internet access to wired and wireless devices.

6.2 Modalità ripetitore wireless

In repeater mode, the IWR 3000N extends the coverage of an existing Wi-Fi network. It connects wirelessly to another router's Wi-Fi signal and re-broadcasts it, effectively expanding the wireless range.

1. Accesso Web Interfaccia: Accedi al router web interface as described in Section 5.2.
2. Navigate to Operating Mode: Find the "Operating Mode" or "Wireless Mode" section in the settings.
3. Seleziona la modalità ripetitore: Choose "Wireless Repeater" or "WISP" mode.
4. Ricerca reti: The router will scan for available Wi-Fi networks. Select the network you wish to extend.
5. Inserisci la password: Provide the Wi-Fi password for the selected network.
6. Salva e riavvia: Save the settings. The router will restart and operate as a repeater.

7. Funzionalità avanzate

7.1 Supporto IPv6

The IWR 3000N is compatible with IPv6, the latest version of the Internet Protocol. This ensures future-proof connectivity and compatibility with modern internet services. Configuration options for IPv6 can typically be found under the "Network" or "WAN" settings in the web interfaccia.

7.2 Site Blocking

This feature allows you to restrict access to specific websites or types of content. It is useful for parental control or managing network usage in a small office.

1. Accesso Web Interfaccia: Accedi al router web interfaccia.
2. Navigate to Security/Parental Control: Look for sections like "Security," "Parental Control," or "Access Control."
3. Configure Site Blocking: Aggiungere il URLs or keywords of the websites you wish to block. You may also be able to set schedules for when these blocks are active.
4. Salva impostazioni: Applica le modifiche.

7.3 Bandwidth Control (QoS)

Bandwidth Control (Quality of Service - QoS) allows you to prioritize internet traffic for certain applications or devices, ensuring smoother performance for critical tasks like online gaming or video conferencing.

1. Accesso Web Interfaccia: Accedi al router web interfaccia.
2. Navigate to QoS/Bandwidth Control: Find the "QoS" or "Bandwidth Control" section.
3. Configure Rules: Set rules based on IP address, MAC address, or application type to allocate bandwidth or prioritize traffic.
4. Salva impostazioni: Applica le modifiche.

8. Manutenzione

8.1 Aggiornamento del firmware

Regularly updating the router's firmware ensures optimal performance, security, and access to new features. Visit the official Intelbras website for the latest firmware for your IWR 3000N model.

1. Scarica il firmware: Scarica il firmware corretto file from the Intelbras support websito sul tuo computer.
2. Accesso Web Interfaccia: Accedi al router web interfaccia.
3. Vai ad Aggiornamento Firmware: Find the "System Tools," "Firmware Upgrade," or "Maintenance" section.
4. Carica firmware: Passare al firmware scaricato file and initiate the upgrade process. Do not power off the router during the update.
5. Ricomincia: The router will restart automatically after the update is complete.

8.2 Ripristino delle impostazioni di fabbrica

A factory reset restores the router to its original default settings. This can be useful for troubleshooting persistent issues or when reconfiguring the device from scratch.

• Method 1 (Hardware Button): With the router powered on, press and hold the WPS/Reset button on the rear panel for approximately 5-10 seconds until the LEDs flash. Release the button, and the router will restart with factory defaults.
• Metodo 2 (Web Interfaccia): Accedi al router web interface. Navigate to "System Tools" or "Maintenance" and find the "Factory Defaults" or "Restore" option. Confirm the action.

9. Risoluzione Dei Problemi

10. Specifiche

11. Garanzia e supporto

For warranty information, technical support, or further assistance, please refer to the warranty card included with your product or visit the official Intelbras website. You can also contact Intelbras customer service directly for specific inquiries related to your IWR 3000N router.

Intelbras Official Websito: www.intelbras.com.br