IK Multimedia iRig Mic HD 2 Digital Microphone User Manual

1. Introduzione

The IK Multimedia iRig Mic HD 2 is a high-definition handheld digital microphone designed for professional audio recording on various devices, including iPhone, iPad, Mac, and PC. It features high-quality 24-bit converters with sample rates up to 96kHz, a low-noise preamp, and a gold-sputtered electret condenser capsule. This manual provides essential information for setting up, operating, and maintaining your iRig Mic HD 2.

2. Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• iRig Mic HD 2 Digital Microphone
• Lightning iOS cable
• Cavo USB
• Compact table tripod
• Mic stand adapter
• 5/8" to 3/8" thread adapter
• Borsa per il trasporto

3. Caratteristiche principali

• Audio ad alta definizione: 24-bit converters with sample rates up to 96kHz for pristine sound quality.
• Preamplificatore a basso rumoreamp: Ensures clear recordings with minimal background noise.
• Gold-Sputtered Condenser Capsule: High-quality cardioid electret condenser capsule for excellent transient accuracy and wide frequency response.
• Uscita cuffie integrata: Dedicated headphone output with volume control for direct monitoring.
• Onboard Gain Control: Multi-color LED level indicator provides real-time feedback for optimal input levels.
• Compatibilità universale: Works with iPhone, iPad, Mac, and PC.
• Design portatile: Ergonomic handheld form factor suitable for various recording environments.

4. Prodotto finitoview

Figura 4.1: Fronte view of the iRig Mic HD 2, showing the microphone grille and branding.

Figure 4.2: The iRig Mic HD 2 showing the gain control knob, headphone volume knob, and LED indicator.

Figura 4.3: lato view of the iRig Mic HD 2 mounted on a stand, highlighting the headphone output and USB connection port at the base.

Figure 4.4: Close-up of the bottom of the iRig Mic HD 2, showing the micro-USB port for connection and the 3.5mm headphone jack.

5. Guida all'installazione

5.1 Connessione a un dispositivo

1. Per dispositivi iOS (iPhone/iPad): Use the provided Lightning cable. Connect the micro-USB end to the iRig Mic HD 2 and the Lightning end to your iOS device.
2. Per Mac/PC: Use the provided USB cable. Connect the micro-USB end to the iRig Mic HD 2 and the standard USB-A end to your computer's USB port.

5.2 Montaggio del microfono

• Uso da tavolo: Attach the iRig Mic HD 2 to the compact table tripod using the mic stand adapter.
• Standard Mic Stand: Use the mic stand adapter and the 5/8" to 3/8" thread adapter (if necessary) to mount the microphone on a standard microphone stand.

Figure 5.1: The iRig Mic HD 2 mounted on a standard microphone stand, ready for use.

Figure 5.2: The iRig Mic HD 2 set up with its included tripod, connected to a smartphone, alongside headphones for monitoring.

5.3 Installazione del software (facoltativa)

For optimal performance and additional features, consider installing IK Multimedia's dedicated audio recording applications (e.g., iRig Recorder, VocaLive) available for iOS, Mac, and PC. Refer to the IK Multimedia websito per il download e le istruzioni di installazione.

6. Istruzioni per l'uso

6.1 Accensione

The iRig Mic HD 2 is bus-powered, meaning it draws power directly from the connected device (iPhone, iPad, Mac, or PC). Simply connect the microphone, and it will power on automatically.

6.2 Adjusting Input Gain

• Locate the gain control knob on the microphone body.
• Rotate the knob to adjust the input sensitivity.
• Observe the multi-color LED indicator:
  • Blu: Signal present, good level.
  • Verde: Optimal signal level.
  • Rosso: Signal too hot (clipping). Reduce gain immediately to avoid distortion.
• Aim for a strong signal that primarily stays in the green, with occasional peaks into blue, and never red.

6.3 Monitoraggio audio

• Connect your headphones to the 3.5mm headphone output jack at the base of the microphone.
• Use the dedicated headphone volume control knob to adjust your monitoring level.
• This allows for real-time, direct monitoring of your audio without latency.

6.4 Recording Best Practices

• Posizionamento del microfono: Position the microphone appropriately for the sound source. For vocals, typically 6-12 inches from the mouth. For instruments, experiment with distance and angle to capture the desired tone.
• Modello cardioide: The iRig Mic HD 2 has a cardioid pickup pattern, meaning it primarily picks up sound from the front and rejects sound from the sides and rear. Point the front of the microphone (where the grille is) directly at the sound source.
• Filtro anti-pop: While the microphone has an internal pop filter, using an external pop filter is recommended for vocal recordings to reduce plosive sounds (P, B).
• Ambiente: Registrare in un ambiente silenzioso per ridurre al minimo il rumore di fondo.

Figure 6.1: A user recording vocals with the iRig Mic HD 2, connected to a smartphone displaying a recording application.

Figure 6.2: The iRig Mic HD 2 positioned to record an acoustic guitar, demonstrating its versatility for instrument recording.

Figure 6.3: A complete recording setup with the iRig Mic HD 2 capturing acoustic guitar, and a smartphone on a tripod for video or audio recording.

7. Manutenzione

• Pulizia: Per pulire il corpo del microfono, utilizzare un panno morbido e asciutto. Non utilizzare detergenti liquidi o solventi.
• Magazzinaggio: When not in use, store the iRig Mic HD 2 in its provided carrying pouch to protect it from dust and physical damage.
• Gestione: Evitare di far cadere il microfono o di sottoporlo a forti urti, poiché ciò potrebbe danneggiare i componenti interni.
• Ambiente: Keep the microphone away from extreme temperatures, humidity, and direct sunlight.

8. Risoluzione Dei Problemi

9. Specifiche

10. Garanzia e supporto

For warranty information and technical support, please refer to the official IK Multimedia webo contattare direttamente il servizio clienti. Conservare la prova d'acquisto per eventuali reclami in garanzia.

• Produttore: Multimedialità IK
• Websito: www.ikmultimedia.com

Potrebbero essere disponibili opzioni di estensione della garanzia presso fornitori terzi. Per maggiori dettagli, contatta il tuo rivenditore.