YATOUR BTA-TOY2 Bluetooth Car Adapter Instruction Manual

Introduzione

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your YATOUR BTA-TOY2 Bluetooth Car Adapter. This device integrates Bluetooth audio streaming, auxiliary input, and USB charging capabilities into your vehicle's factory stereo system, utilizing the original CD changer port. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Image 1: YATOUR BTA-TOY2 Bluetooth Car Adapter, showing the main unit, connection cables, and external microphone.

Informazioni sulla sicurezza

To prevent damage to the device or your vehicle, and to ensure safe operation, observe the following safety guidelines:

• Prima di iniziare l'installazione, assicurarsi che l'accensione del veicolo sia spenta e che la batteria sia scollegata.
• Properly connect the adapter to the CD changer port. Incorrect connections can lead to malfunction or damage.
• Use only the appropriate cables for your vehicle model to avoid electrical issues.
• Route cables securely to prevent interference with vehicle controls or moving parts.
• Do not attempt to disassemble or modify the adapter. This will void the warranty and may cause damage.
• Consult a professional installer if you are unsure about any step of the installation process.

Contenuto della confezione

Verificare che tutti gli articoli siano presenti nel pacco:

• YATOUR BTA-TOY2 Bluetooth Car Adapter Unit
• Vehicle-specific 6+6PIN CDC Connector Cable
• 3.5mm AUX Input Cable
• Microfono esterno
• Manuale dell'utente (questo documento)

Compatibilità

The YATOUR BTA-TOY2 adapter is designed for specific Toyota and Lexus vehicles equipped with 6+6PIN CDC (CD Changer) ports. Please confirm your vehicle and radio model are listed below before installation.

Modelli Lexus compatibili:

• ES300/330/350 (2004-2011)
• GS300/400/430/450h (2006-2011)
• GX470 (2004-2009)
• IS200/250/300/350 (2006-2011)
• LS460 (2007-2011)
• LX470 (2004-2007)
• LX570 (2008-2011)
• SC430 (2005-2010)

Modelli Toyota compatibili:

• 4Runner (2003-2011)
• Avalon (2005-2011)
• Avensis (2003-2011)
• Auris (2007+)
• Camry (2005-2011)
• Celica (2003-2005)
• Corolla/Verso (2005-2011)
• FJ Cruiser (2007-2011)
• Fortuner (2004-2011)
• Hiace (2003-2011)
• L'uomo delle Highlands (2004-2011)
• Hilux (2003-2011)
• Land Cruiser (2003-2011)
• Mark X (2005-2011)
• Matrix (2005-2011)
• MR2 (2004-2010)
• Picnic (2003-2010)
• Prius (2004-2011)
• RAV4 (2003-2012)
• Reiz (2003-2010)
• Sequoia (2005-2011)
• Sienna/Previa (2004-2010)
• Solara (2004-2008)
• Tacoma (2005-2011)
• Tundra (2004-2011)
• Venza (2009-2011)
• Vios (2003-2011)
• Vitz (2006-2010)
• Yaris (2006-2011)

Compatible OEM Radios (by Panasonic and Matsushita):

11816, 11817, 11828, 16852, 12821, 13803, 13829, 16852, 17006, 17828, 50323, 51825, 53816, 53818, 58814, 58816, 58827, P1500, P1714 (supports one folder only, on Lexus RX300), P1733, P1740, P1750 (LX470), P1754, P3745 (Land Cruiser), P3803, P3914 (Prado), P3916, P3918, P3919, P3926, P3930, P3946, P6827, P7514, P7809, P7820, Q58816, A56828, A56829, AP6829, AP6860, W13830, W53822, W53900, W53901, W53903, W53905, W58810, W58814, W58831, B9002 Navigation System, ND3T-W55 (36052) Navigation radio (Mark X, not need y cable), etc.

Note importanti:

• If the CD changer port is already in use by an existing CD changer, an additional MP3/CDC Switch Cable may be required to combine the YATOUR adapter with the CD changer.
• A Splitter/Y cable is necessary if the CD changer port is occupied by a navigation system.

Configurazione e installazione

Installation typically involves connecting the adapter to the vehicle's factory stereo CD changer port. Professional installation is recommended if you are unfamiliar with car audio system wiring.

1. Preparare il veicolo: Spegnere il motore del veicolo e scollegare il terminale negativo della batteria dell'auto per evitare cortocircuiti.
2. Access the Stereo: Carefully remove the car stereo unit from the dashboard to access the rear ports. Refer to your vehicle's service manual for specific instructions on stereo removal.
3. Locate CD Changer Port: Identify the 6+6PIN CD changer port on the back of your factory stereo. This is where the YATOUR adapter will connect.
   

   Immagine 2: Es.ample of a 6+6PIN CDC connector, which plugs into the car stereo.

4. Collegare l'adattatore: Plug the vehicle-specific 6+6PIN CDC connector cable from the YATOUR adapter into the corresponding port on the car stereo. Ensure a secure connection.
   

   Image 3: The main connection cable, showing the adapter-side connector and the vehicle-side 6+6PIN connector.
5. Collegamento del microfono (facoltativo): If using the hands-free calling feature, connect the external microphone to the designated port on the YATOUR adapter. Route the microphone cable to a suitable location, such as near the rearview specchietto retrovisore o sul montante A, per una ricezione vocale ottimale.
6. Route Cables and Secure Adapter: Carefully route all cables to avoid pinching or interference. Secure the YATOUR adapter unit in a safe, dry location behind the dashboard or in the glove compartment, away from heat and moisture.
7. Reassemble Stereo: Reinstall the car stereo unit into the dashboard.
8. Ricollegare la batteria: Ricollegare il terminale negativo della batteria dell'auto.
9. Funzionalità di prova: Turn on the vehicle and stereo to test the adapter's functions.

Istruzioni per l'uso

Activating the Adapter:

After installation, turn on your car stereo. Select the CD changer mode (often labeled "CD," "CDC," or "AUX") on your car stereo. The YATOUR adapter will now be active.

Accoppiamento Bluetooth:

1. Ensure the YATOUR adapter is active (CD changer mode selected).
2. Sul tuo dispositivo mobile, attiva il Bluetooth e cerca i dispositivi disponibili.
3. Select "YATOUR" or a similar identifier from the list of devices.
4. Once paired, your device will connect automatically when the adapter is active.

Streaming audio Bluetooth:

• Play audio from your paired mobile device. Sound will be routed through your car's speakers.
• Control playback (play/pause, next/previous track) using your car stereo buttons or steering wheel controls (if supported by your vehicle and stereo).

Ingresso AUX:

• Connect any external audio source (e.g., MP3 player, portable CD player) to the 3.5mm AUX input port on the YATOUR adapter using the provided AUX cable.
• The adapter will automatically switch to AUX mode when a device is connected to the AUX port.

Ricarica USB:

• The adapter features a 5V/1A USB port for charging mobile devices.
• Nota: This USB port is for charging only and does not support music playback from USB storage devices.

Manutenzione

The YATOUR BTA-TOY2 adapter requires minimal maintenance. Follow these guidelines to ensure longevity:

• Keep the adapter unit and connections dry and free from dust.
• Evitare di esporre l'unità a temperature estreme o alla luce solare diretta per periodi prolungati.
• Do not use harsh chemicals or abrasive cleaners on the unit. A soft, dry cloth is sufficient for cleaning.
• Assicurarsi che tutti i cavi siano collegati saldamente e non siano in tensione.

Risoluzione dei problemi

Specifiche

Garanzia e supporto

YATOUR products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the contact information provided at the point of purchase or visit the official YATOUR websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.