Introduzione
This manual provides essential instructions for the setup, operation, and maintenance of your Intermec PD43 Series Light Industrial Printer. The PD43 is a robust and versatile thermal transfer printer designed for demanding applications in manufacturing, transportation, and warehousing environments. Featuring an all-metal chassis, proven printing mechanics, and powerful electronics, it delivers reliable performance. The integrated monochrome graphical display allows for intuitive setup, configuration, and fine-tuning of printing parameters directly from the device, enhancing user efficiency.
The PD43 supports various Intermec printer languages and can emulate other printer protocols, ensuring compatibility within diverse system environments. Its design allows for continuous printing of crisp, variable-data labels at speeds up to 150 mm/s (6 ips), utilizing industry-standard 200-mm (8-inch) label rolls and 450 m (18,000-inch) ribbons to minimize media loading downtime.
1. Configurazione e installazione
1.1 Disimballaggio della stampante
- Estrarre con attenzione la stampante dall'imballaggio.
- Verificare che tutti i componenti elencati nella bolla di accompagnamento siano presenti.
- Conservare l'imballaggio originale per eventuali trasporti o immagazzinamenti futuri.
1.2 Collegamento dell'alimentazione
- Assicurarsi che l'interruttore di alimentazione della stampante sia in posizione OFF.
- Collegare il cavo di alimentazione all'ingresso di alimentazione della stampante.
- Collegare l'altra estremità del cavo di alimentazione a una presa elettrica con messa a terra.
- Turn the printer's power switch to the ON position. The printer will initiate its startup sequence.
1.3 Collegamento dei cavi dati
The PD43 printer offers multiple connectivity options:
- Collegamento Ethernet: Connect an Ethernet cable from your network to the printer's Ethernet port.
- USB: Collegare un cavo USB dal computer alla porta USB della stampante.
- Seriale: Connect a serial cable to the printer's serial port for direct communication.
- Parallel (IEEE 1284): Connect a parallel cable to the printer's parallel port if required by your system.
1.4 Caricamento dei supporti (etichette e nastro)
Figure 1: Intermec PD43 Printer with media loaded (right) and closed (left).
Proper media loading is crucial for optimal print quality and printer operation. Refer to the printer's internal diagrams and the graphical display for specific instructions.
- Aprire il coperchio superiore della stampante.
- Install the label roll onto the media supply spindle, ensuring the labels feed correctly according to the internal guides.
- Install the thermal transfer ribbon onto the ribbon supply spindle, threading it through the print mechanism as indicated by the printer's guides.
- Chiudere saldamente il coperchio superiore.
- The printer's display will guide you through calibration if necessary.
2. Utilizzo della stampante
2.1 Pannello di controllo Sopraview
The PD43 features a monochrome graphical display and a push-button control panel for easy navigation and configuration.
- Schermo di visualizzazione: Mostra lo stato della stampante, le opzioni del menu e i messaggi di errore.
- Pulsanti di navigazione: Utilizzato per scorrere i menu e regolare le impostazioni.
- Pulsante Seleziona/Invio: Conferma le selezioni.
- Pulsante di alimentazione: Avanza di un'etichetta o di una lunghezza specificata del supporto.
- Pulsante Pausa/Annulla: Pauses printing or cancels a print job.
2.2 Stampa di base
- Ensure the printer is powered on and connected to your host system.
- Load the appropriate labels and ribbon.
- From your computer or host system, send the print job to the Intermec PD43 printer.
- Monitor the printer's display for status updates or error messages.
2.3 Printer Configuration
The graphical display allows for direct configuration of various printer settings, including:
- Media type and sensor calibration.
- Print darkness and speed.
- Network settings (IP address, subnet mask).
- Printer language emulation.
- Diagnostic tests.
Navigate through the menu using the control panel buttons to access and modify these settings.
3. Manutenzione
Regular maintenance ensures optimal performance and extends the lifespan of your PD43 printer.
3.1 Pulizia della testina di stampa
- Spegnere la stampante e scollegare il cavo di alimentazione.
- Aprire il gruppo testina di stampa.
- Using a lint-free cloth or a printhead cleaning pen moistened with isopropyl alcohol, gently wipe the printhead surface from center to edge.
- Allow the printhead to dry completely before closing the assembly and reconnecting power.
- Perform this cleaning regularly, especially when print quality degrades.
3.2 Pulizia del rullo di stampa
- With the printer off and power disconnected, locate the platen roller beneath the printhead.
- Use a lint-free cloth moistened with isopropyl alcohol to clean the roller, rotating it manually to clean the entire surface.
- Lasciare asciugare prima dell'uso.
3.3 Sostituzione dei supporti
Replace label rolls and thermal transfer ribbons as they run out. Always use media that meets Intermec specifications for the PD43 printer to ensure compatibility and print quality.
3.4 Aggiornamenti firmware
Controllare periodicamente il supporto Intermec website for available firmware updates. Firmware updates can improve printer performance, add new features, or resolve known issues. Follow the instructions provided with the firmware update package carefully.
4. Risoluzione Dei Problemi
Questa sezione affronta i problemi più comuni che potresti riscontrare con la tua stampante PD43.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| La stampante non si accende | Power cord disconnected; Power outlet fault; Printer power switch off. | Check power cord connections; Test power outlet; Ensure power switch is ON. |
| Nessuna stampa in uscita | No data received; Media not loaded; Printhead open; Printer paused. | Verify data cable connection and driver installation; Load media correctly; Close printhead; Press Pause/Resume button. |
| Poor print quality (faded, missing lines) | Dirty printhead; Incorrect print darkness setting; Worn printhead; Incorrect ribbon/label combination. | Clean printhead; Adjust print darkness via display; Replace printhead if worn; Ensure compatible media. |
| Inceppamento dei supporti | Improper media loading; Damaged media; Obstruction in paper path. | Turn off printer, open cover, carefully remove jammed media; Reload media correctly; Inspect paper path for obstructions. |
| Messaggio di errore sul display | Specific error condition (e.g., "Out of Media", "Ribbon End"). | Refer to the printer's display message for specific instructions. Typically involves reloading media, clearing jams, or restarting the printer. |
If you continue to experience issues, consult the comprehensive technical manual available on the Intermec support websito o contattare l'assistenza clienti.
5. Specifiche
Key technical specifications for the Intermec PD43 Series Light Industrial Printer (Model PD43A03100010201).
- Modello: PD43A03100010201
- Tecnologia di stampa: Trasferimento termico
- Risoluzione di stampa: 203 dpi
- Velocità di stampa massima: 150 mm/s (6 ips)
- Connettività: Ethernet, USB, Serial, Parallel IEEE 1284
- Display: Monochrome Graphical Display
- Tipo di controllo: Premere il pulsante
- Dimensione massima del supporto: 8 pollici
- Peso dell'articolo: 18.5 libbre
- Dimensioni (confezione): 23.5 x 14.5 x 12.5 pollici
- Caratteristiche: All-metal chassis, robust design, support for various printer languages.
6. Garanzia e supporto
For detailed warranty information, please refer to the warranty card included with your product or visit the official Intermec (now Honeywell) website. Technical support and additional resources, including drivers and updated documentation, are available through the manufacturer's support channels.
Supporto online: www.honeywellaidc.com/support
When contacting support, please have your printer's model number (PD43A03100010201) and serial number ready.