HyperX Cloud II Gaming Headset Instruction Manual

1. Finitaview

The HyperX Cloud II is a high-performance gaming headset designed for comfort and superior audio quality across multiple platforms. It features virtual 7.1 surround sound, large 53mm drivers, and a durable aluminum frame. The headset is equipped with comfortable memory foam ear cushions and a detachable noise-cancelling microphone for clear communication.

Image 1: The HyperX Cloud II Gaming Headset in Gun Metal, showcasingrazie al suo design e al microfono staccabile.

2. Cosa c'è nella scatola

• Cuffie da gioco HyperX Cloud II
• Microfono staccabile con cancellazione del rumore
• USB Sound Card Audio Control Box
• Cavo di prolunga per PC
• Guida rapida
• Additional Velour Ear Cushions (pre-installed are leatherette)

3. Impostazione

3.1 Collegamento dell'auricolare

1. Connect the detachable microphone to the headset's microphone port on the left ear cup.
2. For PC and Mac, connect the headset's 3.5mm jack to the USB Sound Card Audio Control Box. Then, plug the USB connector of the control box into an available USB port on your computer.
3. For PS4, Xbox One, Nintendo Switch, and mobile devices, connect the headset's 3.5mm jack directly to the controller or device's audio port. The USB Sound Card Audio Control Box is not typically used for these connections for optimal stereo sound.

Image 2: A diagram illustrating the multi-platform compatibility of the HyperX Cloud II, showing USB connection for PC/Playstation/Nintendo Switch and 3.5mm connection for Xbox Controller/Mobile/VR.

3.2 Configuring 7.1 Virtual Surround Sound (PC/Mac)

The HyperX Cloud II features a USB sound card audio control box that enables virtual 7.1 surround sound on PC and Mac. Follow these steps to ensure proper configuration:

Per Windows:

1. Open the Control Panel and navigate to 'Hardware and Sound', then select 'Sound'.
2. In the 'Playback' tab, locate 'HyperX 7.1 Audio' (or 'USB Audio'). If it's not the default device, right-click and select 'Set as Default Device'. A green checkmark will appear.
3. Repeat the same steps for the microphone under the 'Recording' tab, selecting 'HyperX 7.1 Audio' (or 'USB Audio') as the default input device.

Per Mac:

1. Click the Apple menu and select 'System Preferences'.
2. Click on the 'Sound' icon.
3. In the 'Input' tab, select 'HyperX 7.1 Audio' (or 'USB Audio') for default sound input.
4. In the 'Output' tab, select 'HyperX 7.1 Audio' (or 'USB Audio') for default sound output.

Image 3: The HyperX Cloud II headset with an overlay indicating its 7.1 virtual surround sound capability.

4. Utilizzo dell'auricolare

4.1 Audio Control Box Functions

The USB Sound Card Audio Control Box provides convenient access to audio settings:

• Controllo del volume delle cuffie: Use the '+' and '-' buttons on the left side to adjust headphone volume.
• Controllo del volume del microfono: Use the '+' and '-' buttons on the right side to adjust microphone volume.
• Attiva/disattiva audio surround 7.1: Press the '7.1' button in the center to activate or deactivate virtual 7.1 surround sound.
• Microfono disattivato: Use the switch on the side of the control box to quickly mute or unmute the microphone.

Image 4: The Advanced USB Sound Card Audio Control Box for the HyperX Cloud II headset, showing volume controls and 7.1 surround sound toggle.

4.2 Microfono staccabile

The noise-cancelling microphone can be detached when not needed, allowing the headset to be used for music listening or other audio without the microphone boom in the way.

Immagine 5: Un primo piano view of the HyperX Cloud II's detachable, noise-cancelling microphone.

5. Manutenzione

5.1 Sostituzione dei cuscinetti auricolari

The HyperX Cloud II comes with both leatherette and velour ear cushions. These are replaceable, allowing you to maintain comfort and hygiene over time. To replace, gently pull off the existing ear cushions and press the new ones onto the ear cups until securely attached.

Image 6: The HyperX Cloud II headset highlighting its comfortable memory foam ear cushions.

5.2 Cura generale

• Store the headset in a clean, dry place when not in use.
• Evitare di esporre le cuffie a temperature o umidità estreme.
• Pulisci i cuscinetti auricolari e l'archetto con un panno morbido eamp stoffa. Non utilizzare prodotti chimici aggressivi.

6. Risoluzione Dei Problemi

6.1 No Audio or Microphone Function

• Controllare le connessioni: Ensure all cables (3.5mm jack, USB) are securely connected to the headset, control box, and device.
• Default Audio Device: Verify that 'HyperX 7.1 Audio' (or 'USB Audio') is set as the default playback and recording device in your operating system's sound settings (refer to Section 3.2 for detailed steps).
• Livelli del volume: Check both the headset's volume controls on the audio control box and your device's system volume. Ensure the microphone is not muted.
• Microphone Detached: Confirm the detachable microphone is fully inserted into its port.

7. Specifiche

8. Garanzia e supporto

Per informazioni dettagliate sulla garanzia e sul supporto tecnico, fare riferimento al sito ufficiale HyperX websito o la scheda di garanzia inclusa con il prodotto. Puoi anche visitare il sito Negozio HyperX su Amazon per risorse aggiuntive.