Atlantic Mantova Wall Spout WSM-S Instruction Manual

1. Introduzione

Thank you for choosing the Atlantic Mantova Wall Spout. This solid brass fixture, featuring an oil-rubbed bronze finish, is designed to enhance outdoor water features with a consistent water flow. This manual provides essential information for the proper installation, operation, and maintenance of your wall spout to ensure optimal performance and longevity.

2. Caratteristiche del prodotto

• Materiale: Solid cast brass construction for durability.
• Fine: Oil Rubbed Bronze finish.
• Peso: Circa 3 libbre.
• Flusso consigliato: 600 gallons per hour (GPH) for a smooth water flow.
• Dimensione ingresso: 1.5-inch FIPT (Female Iron Pipe Thread).
• Messa a terra: Includes a grounding lug for bonded systems.
• Compatibilità: Designed for use with Atlantic Spout Lights (sold separately) which thread into a 1-inch threaded tee from the back.
• Applicazioni: Suitable for hardscape walls, formal water features, larger waterfall spillways, or open spillway basins.

3. Informazioni sulla sicurezza

Always follow local electrical and plumbing codes. Disconnect power to all equipment before installation or maintenance. Ensure proper grounding for all electrical components in your water feature system. If you are unsure about any installation steps, consult a qualified professional.

4. Configurazione e installazione

4.1 Disimballaggio

Carefully remove the Mantova Wall Spout from its packaging. Inspect for any damage. Retain packaging for future storage or transport.

4.2 Considerazioni sul posizionamento

The wall spout is designed for integration into hardscape walls or similar structures. Ensure the chosen location allows for proper water flow into a basin or pond and provides adequate support for the spout and plumbing.

4.3 Collegamento idraulico

1. The wall spout features a 1.5-inch FIPT inlet. Connect appropriate plumbing (e.g., PVC pipe) to this inlet.
2. Use thread sealant tape or pipe dope on all threaded connections to prevent leaks.
3. Ensure the plumbing is securely fastened and supported within the wall structure.

Image 1: Atlantic Mantova Wall Spout installed in a stone wall, showing water flowing into a basin.

Image 2: Multiple Atlantic Mantova Wall Spouts creating a water feature.

4.4 Messa a terra

The wall spout includes a grounding lug. For bonded systems, connect a grounding wire to this lug according to local electrical codes. This is crucial for safety in water features with electrical components.

4.5 Optional Spout Light Installation

If installing an Atlantic Spout Light (sold separately), thread it into a 1-inch threaded tee from the back of the wall spout before final installation. Ensure all electrical connections for the light are waterproof and meet safety standards.

Image 3: Mantova Wall Spout with an optional Spout Light, showing illuminated water flow.

5. Istruzioni per l'uso

5.1 Regolazione del flusso d'acqua

The recommended flow rate for the Mantova Wall Spout is 600 GPH to achieve a smooth, consistent stream. Adjust your pump's flow rate or use a flow control valve to achieve the desired effect. Excessive flow may cause splashing, while insufficient flow may result in an uneven stream.

5.2 Avvio iniziale

After installation and filling your water feature, turn on the pump. Allow water to circulate through the system and purge any air. Check all connections for leaks and adjust the water flow as needed.

6. Manutenzione

6.1 Pulizia regolare

Periodically inspect the wall spout for debris, mineral buildup, or algae. Clean the spout using a soft brush and mild, non-abrasive cleaner. Avoid harsh chemicals that could damage the oil-rubbed bronze finish.

6.2 Rimessaggio invernale

In freezing climates, it is essential to drain the water feature and remove the wall spout (if possible) or ensure all water is completely drained from the spout and associated plumbing to prevent ice damage. Store the spout in a dry, protected area during winter months.

7. Risoluzione Dei Problemi

8. Specifiche

9. Garanzia e supporto

9.1 Garanzia del produttore

Questo prodotto è coperto da a Garanzia del produttore di 1 anni. For specific terms and conditions, please refer to the warranty documentation included with your purchase or visit the Atlantic Water Gardens official websito.

9.2 Assistenza clienti

For technical assistance, replacement parts, or warranty claims, please contact Atlantic Water Gardens customer support. Visit their official websito per le informazioni di contatto.

10. Video di prodotto