Introduzione
Thank you for choosing the Tascam TH-200X Studio Headphones. These closed-back headphones are designed for accurate audio monitoring, mixing, and general music listening. They feature a lightweight, durable construction with comfortable padding for extended use. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your TH-200X headphones.
Cosa c'è nella scatola
Si prega di verificare che tutti i seguenti articoli siano inclusi nel pacchetto:
- Cuffie da studio Tascam TH-200X
- Attached Audio Cable (3.5mm jack)
- 6.35mm (1/4-inch) Screw-on Adapter

Image: The included 3.5mm audio jack and the detachable 6.35mm (1/4-inch) screw-on adapter for wider compatibility with audio equipment.
Istruzioni di installazione
- Disimballaggio: Estrarre con cautela le cuffie e tutti gli accessori dalla confezione.
- Collegamento a una sorgente audio:
- For devices with a 3.5mm headphone jack (e.g., smartphones, laptops), simply plug the attached 3.5mm cable directly into the audio output.
- For devices with a 6.35mm (1/4-inch) headphone jack (e.g., audio interfaces, mixing consoles, amplifiers), screw the provided 6.35mm adapter onto the 3.5mm jack before plugging it into the audio output. Ensure the adapter is securely fastened.
- Regolazione della vestibilità:
- Posizionare le cuffie sopra le orecchie, assicurandosi che i padiglioni le avvolgano completamente, per un isolamento acustico e un comfort ottimali.
- Adjust the headband by sliding the earcups up or down along the stainless steel frame until a comfortable and secure fit is achieved. The 'L' and 'R' indicators on the inside of the headband denote the left and right earcups, respectively.

Immagine: Lato view of the Tascam TH-200X headphones, highlighting the branding and the 'L' indicator for the left earcup.

Immagine: Lato view of the Tascam TH-200X headphones, highlighting the branding and the 'R' indicator for the right earcup.
Istruzioni per l'uso
- Controllo del volume: Adjust the volume directly from your connected audio source (e.g., computer, audio interface, smartphone). The TH-200X headphones do not feature inline volume controls.
- Ascolto sicuro: To prevent hearing damage, avoid listening at high volumes for extended periods. Start with a low volume and gradually increase it to a comfortable level.
- Uso previsto: These headphones are optimized for studio monitoring and mixing, providing a neutral sound reproduction. They are also suitable for general music listening.
Manutenzione
- Pulizia:
- Pulisci i padiglioni auricolari e l'archetto con un panno morbido e asciutto.
- Per sporco ostinato, leggermente dampLavare il panno con acqua. Evitare l'uso di prodotti chimici aggressivi o detergenti abrasivi.
- Non immergere le cuffie in acqua o altri liquidi.
- Magazzinaggio:
- Conservare le cuffie in un luogo pulito e asciutto, lontano da temperature estreme e dalla luce solare diretta.
- Evitare di appoggiare oggetti pesanti sulle cuffie.
- Cura del cavo:
- Avoid sharply bending or twisting the cable.
- Do not pull on the cable to disconnect it from an audio source; always grasp the plug itself.

Immagine: Angolata view of the Tascam TH-200X headphones, demonstrating the adjustable headband and durable construction.
Risoluzione dei problemi
- Nessun suono:
- Ensure the headphone cable is fully plugged into both the headphones and the audio source.
- Controlla il livello del volume della tua sorgente audio e assicurati che non sia disattivato.
- Prova le cuffie con una sorgente audio o un dispositivo diverso per escludere un problema specifico del dispositivo.
- If using the 6.35mm adapter, ensure it is securely screwed onto the 3.5mm jack.
- Suono distorto:
- Abbassa il volume della sorgente audio. Un volume eccessivo può causare distorsioni.
- Assicurarsi che i collegamenti dei cavi audio siano saldi.
- Test with another audio source to determine if the issue is with the headphones or the source.
- Vestibilità scomoda:
- Adjust the headband length by sliding the earcups until they sit comfortably over your ears without excessive pressure.
- Ensure the earcups fully cover your ears.
Specifiche tecniche
| Modello | TH-200X |
| Marca | Tascam |
| Posizionamento dell'orecchio | Sopra l'orecchio |
| Fattore di forma | Sopra l'orecchio |
| Controllo del rumore | Isolamento acustico |
| Tipo di driver audio | Dynamic Driver (40mm Neodymium Magnet) |
| Gamma di frequenza | Da 15 Hz a 22 kHz |
| Tecnologia di connettività | Cablato |
| Presa per cuffie | Jack da 3.5 mm, Jack da 6.35 mm (con adattatore) |
| Materiale | Acciaio inossidabile (telaio) |
| Peso dell'articolo | 0.41 chilogrammi |
| Caratteristiche aggiuntive | Lightweight, Adjustable, Durable, Retractable Cable |

Immagine: Frontale view of the Tascam TH-200X headphones, showcasing the comfortable padded headband and earcups.
Garanzia e supporto
Tascam products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Tascam websito.
For technical support, service, or further inquiries, please visit the official Tascam support page:
Conservare la prova d'acquisto per eventuali richieste di garanzia.
Additionally, if purchased through Amazon, a 30-day refund/replacement policy may apply. Please refer to your Amazon purchase details for more information.