ASUS TUF SABERTOOTH 990FX R2.0 Motherboard Instruction Manual

1. Prodotto finitoview

The ASUS TUF SABERTOOTH 990FX R2.0 is an ATX motherboard designed for AMD Socket AM3+ processors, supporting up to 8-core AMD FX Series CPUs and compatible with previous generation AM3 processors. This motherboard emphasizes stability, compatibility, and durability, ensuring reliable operation under various conditions.

Key features include CeraM!X premium ceramic-coating technology for enhanced heat dissipation, TUF Thermal Radar with 10 hardware sensors for real-time thermal detection, and DIGI+ Power Control for precise CPU and DRAM voltage regulation. It also incorporates ASUS E.S.P. for efficient power switching, MemOK! for memory boot compatibility, and ESD Guards for component protection. The board supports Quad-GPU SLI and Quad-GPU CrossFireX for multi-GPU configurations and utilizes military-standard TUF capacitors, chokes, and MOSFETs for extended lifespan.

2. Configurazione e installazione

2.1. CPU Installation (Socket AM3+)

Carefully align your AMD AM3+ processor with the motherboard socket. Ensure the CPU is correctly oriented before gently lowering it into place. Close the retention lever to secure the CPU.

2.2. Installazione della RAM (DDR3)

This motherboard supports DDR3 memory. Open the clips on the DIMM slots. Align the memory module's notch with the slot's key and press down firmly on both ends until the clips snap into place. Refer to the motherboard layout for recommended dual-channel configurations.

2.3. Storage Device Installation (SATA 6Gb/s)

Connect your SATA 6Gb/s storage devices (HDDs, SSDs) to the available SATA ports on the motherboard using SATA data cables. Ensure power cables from your power supply are also connected to the devices.

2.4. Installazione della scheda di espansione (PCIe)

Insert your PCI Express expansion cards (e.g., graphics cards, sound cards) into the appropriate PCIe slots. Press down firmly until the card is seated correctly and secure it with a screw to the chassis.

2.5. Collegamenti di alimentazione

Collegare il connettore di alimentazione principale ATX a 24 pin e il connettore di alimentazione ATX a 8 pin da 12 V dell'alimentatore alle prese corrispondenti sulla scheda madre.

2.6. Collegamenti del pannello frontale

Connect the front panel headers (power button, reset button, HDD LED, power LED, USB ports, audio jacks) from your chassis to the corresponding pins on the motherboard. Refer to the motherboard manual for exact pin assignments.

3. Istruzioni per l'uso

3.1. Configurazione BIOS/UEFI

Upon initial boot, press the designated key (usually DEL or F2) to enter the BIOS/UEFI setup utility. Here you can configure boot order, system time, and various hardware settings. The DIGI+ Power Control allows for advanced power management and tuning.

3.2. Installazione del driver

After installing your operating system, install all necessary drivers from the provided support DVD or the ASUS website. This includes chipset drivers, audio drivers, LAN drivers, and any other peripheral drivers to ensure optimal system performance.

3.3. Monitoraggio del sistema

Utilize the TUF Thermal Radar software to monitor real-time thermal conditions across 10 hardware sensors on the motherboard. This allows for customized cooling settings and proactive thermal management.

4. Manutenzione

4.1. Pulizia della polvere

Regularly clean dust from the motherboard and cooling components using compressed air. Ensure the system is powered off and unplugged before cleaning.

4.2. Aggiornamenti del BIOS

Controllare periodicamente il supporto ASUS webSito per gli aggiornamenti BIOS/UEFI. L'aggiornamento del BIOS può migliorare la stabilità, la compatibilità e le prestazioni del sistema. Seguire attentamente le istruzioni fornite da ASUS durante il processo di aggiornamento.

4.3. Controlli dei componenti

Ensure all cables and components are securely seated. Loose connections can lead to system instability or non-functionality.

5. Risoluzione Dei Problemi

5.1. Il sistema non si avvia

• Verify all power connections to the motherboard and components are secure.
• Check that the CPU and RAM are correctly installed.
• Utilizzare il MemOK! button on the motherboard to resolve memory compatibility issues if the system fails to boot due to RAM.
• Ensure the graphics card is properly seated and connected to power, if applicable.

5.2. Peripheral Recognition Issues

• Assicurarsi che tutti i driver siano installati correttamente e aggiornati.
• Check USB and SATA connections for proper seating.
• Test peripherals on different ports to rule out faulty ports.

5.3. Instabilità/arresti anomali del sistema

• Monitor system temperatures using TUF Thermal Radar to check for overheating.
• Ensure adequate cooling and airflow within the PC case.
• Verify RAM stability using diagnostic tools.
• Check for the latest BIOS/UEFI firmware and update if necessary.

The motherboard features ESD Guards to protect components from electrostatic discharge, which can help prevent certain types of hardware failures.

6. Specifiche

7. Immagini del prodotto

7.1. Immagini del prodotto

7.2. Video ufficiali dei prodotti

8. Garanzia e supporto

Per informazioni dettagliate sulla garanzia, fare riferimento al sito ufficiale ASUS website or the documentation included with your purchase. Product support, including driver downloads and further troubleshooting guides, can also be found on the official ASUS support portal.

Please note the legal disclaimer: "Item is nonrefundable once purchased. Still has original packaging." This information is provided by the seller and may pertain to specific purchase conditions.