KOMATSU PC650, PC650LC, PC650SE
KOMATSU PC650, PC650LC, PC650SE Hydraulic Excavator
Operation, Maintenance, Service, and Repair Manual
Introduzione
This manual provides comprehensive information for the operation, maintenance, service, and repair of KOMATSU PC650-5, PC650LC-5, and PC650SE-5 Hydraulic Excavators, including models with serial numbers A25001 and up. It contains detailed instructions, illustrations, and diagrams to assist in all aspects of machine management, from routine maintenance to complex repairs and troubleshooting.
The content is structured to provide clear, step-by-step guidance for assembly, disassembly, and system diagnostics, ensuring efficient and effective machine upkeep.
Fine manualeview
Figure 1: Front cover of the official KOMATSU Operation & Maintenance Manual for PC650, PC650LC, and PC650SE Hydraulic Excavators. The cover is yellow with black text, indicating "Operation & Maintenance Manual" at the top, followed by "PC650-5, PC650LC-5, PC650SE-5 HYDRAULIC EXCAVATOR" and serial number ranges. The KOMATSU logo is visible at the bottom.
This manual is an essential resource for technicians and operators. It covers a wide range of topics, ensuring that all necessary information is readily available for maintaining the optimal performance and longevity of your Komatsu hydraulic excavator.
Installazione e ispezione iniziale
Before operating the excavator, a thorough setup and initial inspection are crucial. This section details the procedures for preparing the machine for first use or after transport.
- Controlli del livello del fluido: Verify engine oil, hydraulic fluid, coolant, and fuel levels. Refer to the specifications section for correct fluid types and capacities.
- Collegamento della batteria: Assicurarsi che i terminali della batteria siano puliti e collegati saldamente.
- Tensione del binario: Inspect and adjust track tension as required for the operating conditions.
- Dispositivi di sicurezza: Confirm all safety interlocks, alarms, and emergency stop buttons are functional.
- Ispezione visiva: Check for any visible damage, loose fasteners, or leaks.
Procedure operative
This section outlines the correct procedures for operating the KOMATSU PC650 series hydraulic excavators safely and efficiently.
Avviamento del motore
- Ensure the parking brake is engaged and the control levers are in neutral.
- Insert the key into the ignition switch and turn it to the ON position.
- Wait for the pre-heat indicator to turn off (if applicable).
- Turn the key to the START position and release once the engine starts. Do not crank for more than 15 seconds.
Funzionamento di base
- Viaggio: Use the travel levers/pedals to move the machine forward or backward.
- Swing: Operate the swing control lever to rotate the upper structure.
- Boom, Arm, Bucket: Utilize the multi-function control levers for precise movement of the boom, arm, and bucket.
Programma e procedure di manutenzione
Regular maintenance is vital for the longevity and performance of your excavator. This section provides detailed maintenance schedules and procedures.
Daily Checks (Before Operation)
- Controllare il livello dell'olio motore.
- Inspect hydraulic oil level.
- Controllare il livello del liquido di raffreddamento.
- Drain water and sediment from the fuel tank.
- Inspect tracks and undercarriage for damage.
50-Hour / Weekly Maintenance
- Lubrificare tutti i punti di ingrassaggio.
- Check fan belt tension.
- Inspect air cleaner element.
250-Hour / Monthly Maintenance
- Cambiare olio motore e filtro.
- Sostituire l'elemento del filtro del carburante.
- Check hydraulic oil filter.
For detailed instructions on each maintenance task, refer to the specific chapters within the full manual.
Guida alla risoluzione dei problemi
This section provides a basic guide to common issues and their potential solutions. For complex problems, consult a qualified technician or refer to the detailed troubleshooting charts in the complete service manual.
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Il motore non si avvia | Low battery charge, fuel system issue, faulty starter | Check battery, inspect fuel lines/filters, test starter motor |
| Hydraulic system slow/weak | Livello del fluido idraulico basso, filtro intasato, problema alla pompa | Check fluid level, replace filter, consult service manual for pump diagnostics |
| Motore surriscaldato | Livello del liquido di raffreddamento basso, radiatore intasato, termostato difettoso | Check coolant, clean radiator fins, replace thermostat |
Specifiche
Key specifications for the KOMATSU PC650, PC650LC, and PC650SE Hydraulic Excavators.
- Modelli coperti: PC650-5, PC650LC-5, PC650SE-5
- Numeri di serie applicabili: A25001 and up (for PC650-5, PC650LC-5, PC220SE-5)
- Tipo manuale: Operation, Maintenance, Service, Shop, Repair Manual
- Contenuto: Step-by-step instructions, assembly/disassembly, exploded illustrations/diagrams, troubleshooting.
Note: For detailed technical specifications such as engine type, power output, operating weight, and dimensions, please refer to the complete manual or the official Komatsu product documentation.
Garanzia e supporto
For information regarding product warranty, please refer to the warranty documentation provided at the time of purchase or contact your authorized KOMATSU dealer. Technical support and genuine spare parts can be obtained through official KOMATSU service centers.
Informazioni sui contatti:
- Authorized KOMATSU Dealer: Locate your nearest dealer
- KOMATSU Official Websito: www.komatsu.com