Manuale utente delle cuffie wireless XP Metal Detectors WS4 (modello D09)

Introduzione

The XP Metal Detectors WS4 Wireless Headphones are designed for use with the Deus metal detector, offering a lightweight, compact, and shower-proof audio solution. This manual provides essential information for the proper setup, operation, and maintenance of your WS4 headphones.

Image: The XP WS4 Wireless Headphones with their integrated control module.

Caratteristiche principali

• Tecnologia wireless: Utilizes XP's patented radio protocol for low latency, 10 times faster than standard Bluetooth.
• Detachable Control Module: The WS4 module can be removed from the headband for use with optional accessories (sold separately), allowing attachment to the stem, wrist, or pocket.
• Controlli integrati: The WS4 module allows direct adjustment of main detector settings including discrimination, sensitivity, ground effects, 5 multi-tones + full tones + pitch mode, 35 frequencies (3.7 to 27.7 kHz), 10 factory programs + 8 user programs, volume, reactivity, TX power, tracking, frequency offset, iron volume, and audio response.
• Durata: Fully shower-proof design for use in various weather conditions.
• Portabilità: Foldable, compact, and extremely lightweight design.
• Durata della batteria: Fino a 27 ore di funzionamento con una singola carica.

Immagine: Oltreview of the WS4 headphones' primary features.

Image: The WS4 headphones demonstrating their rainproof design.

Image: The WS4 headphones' foldable and compact design with the detachable module.

Impostare

Assembly and Wearing

To ensure comfort and proper function, correctly assemble and position the WS4 headphones. First, ensure all joints are securely connected. Then, place the headphones over the back of your head. Gently open them slightly to allow your ear tips to come through. Use your thumbs under the two hinges and fingers on top to bend the headband down, opening the joint. This triangulates the fit between your ears and the back of your neck, preventing discomfort and ensuring stability.

Video: Demonstrates the correct method for positioning and wearing the XP WS4 wireless headphones for optimal comfort and security.

Carica iniziale

Before first use, fully charge the WS4 headphones using the included charging cord. The headphones feature a lithium battery. The control module indicates the battery level of both the headphone and the coil.

Istruzioni per l'uso

Accensione/spegnimento

Locate the 'On/Off' button on the WS4 control module. Press and hold to power the unit on or off.

Pairing with Deus Detector

The WS4 headphones are designed to seamlessly connect with your XP Deus metal detector. Refer to your Deus detector's manual for specific pairing instructions. Once paired, the WS4 can operate the detector independently, even if the main remote control is off, providing a lighter detection setup.

Adjusting Settings via WS4 Module

The WS4 control module provides access to various detector settings. Use the 'MENU' button to navigate through options and the '+' and '-' buttons to adjust values. Settings accessible include:

• Discriminazione
• Sensibilità
• Ground Effects
• Multi-tones (5 options) + Full Tones + Pitch Mode
• Frequencies (35 options, from 3.7 to 27.7 kHz)
• Factory Programs (10 options) + User Programs (8 options)
• Volume
• Reattività
• Potenza di trasmissione
• Monitoraggio
• Offset di frequenza
• Volume di ferro
• Audio Answer

Image: The WS4 control module, illustrating its capability to adjust key settings without the main remote control.

Manutenzione

Pulizia

Pulisci le cuffie con un panno morbido, damp panno. Evitare l'uso di prodotti chimici aggressivi o materiali abrasivi. Assicurarsi che la porta di ricarica sia asciutta prima di caricare.

Magazzinaggio

Conservare le cuffie in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme. Il design pieghevole consente di riporle in modo compatto.

Cura della batteria

For optimal battery longevity, avoid fully discharging the battery frequently. Recharge as needed. If storing for an extended period, charge the battery to approximately 50% every few months.

Risoluzione dei problemi

• Nessun audio: Ensure headphones are powered on, charged, and correctly paired with the detector. Check volume settings on both the headphones and the detector.
• Connessione intermittente: Verify that the headphones are within range of the detector. Check for potential sources of interference.
• Cuffie scomode: Re-adjust the headband as described in the 'Assembly and Wearing' section to ensure proper fit.
• Problemi di ricarica: Ensure the charging cable is securely connected to both the headphones and a power source. Check if the charging indicator light is active.

Specifiche

Garanzia e supporto

The XP Metal Detectors WS4 Wireless Headphones are designed for durability and come with a 5-year support commitment. For warranty claims, technical assistance, or additional support, please visit the official XP Metal Detectors store or contact their customer service directly.

Supporto online: Visit the XP METAL DETECTORS Store on Amazon