General Tools MMD950 Moisture Meter User Manual

1. Introduzione

The General Tools MMD950 is a versatile moisture meter designed for detecting moisture content in various building materials such as wood, drywall, and concrete. This device offers both pin-type and pinless measurement modes, providing flexibility for different applications. It features a large LCD display, LED visual alerts, and an audible alarm to indicate moisture levels. This manual provides essential information for the proper setup, operation, and maintenance of your MMD950 Moisture Meter.

2. Informazioni sulla sicurezza

Please read and understand all safety instructions before using the device. Failure to follow these instructions may result in injury or damage to the meter.

• Sharp Probes: The pin-type probe contains sharp tips. Handle with care to prevent injury. Keep the protective cap on when not in use.
• Sicurezza della batteria: Use only the specified battery type (9V). Do not mix old and new batteries. Dispose of batteries properly according to local regulations.
• Condizioni ambientali: Do not expose the meter to extreme temperatures, high humidity, or direct sunlight for extended periods.
• Pulizia: Clean the meter with a soft, dry cloth. Do not use abrasive cleaners or solvents.

3. Contenuto della confezione

Verifica che tutti gli articoli siano presenti nel tuo pacco:

• General Tools MMD950 Moisture Meter
• External Pin-Type Probe
• Perni di ricambio
• Batteria da 9 V
• Custodia per il trasporto personalizzata

4. Prodotto finitoview

Familiarize yourself with the components of your MMD950 Moisture Meter.

Figura 1: The General Tools MMD950 Moisture Meter, featuring a large LCD display, spherical pinless sensor, and a connected remote pin-type probe. The device is yellow and gray with clear controls.

• Spherical Pinless Sensor: Located at the top of the meter, used for non-invasive moisture detection.
• Schermo LCD: Shows moisture readings, battery status, and mode indicators.
• LED Bar Graph: Provides visual indication of moisture levels (Green: Low, Yellow: Medium, Red: High).
• Remote Pin-Type Probe Port: Connects the external pin-type probe for invasive measurements.
• Pulsante di accensione / modalità: Turns the device on/off and switches between measurement modes.
• Pulsante ATTESA: Blocca la lettura corrente sul display.
• Tappo di calibrazione: Protective cover for the pin-type probe, also used for calibration.

Figura 2: The MMD950 meter displaying its dual measurement capabilities: the spherical sensor for pinless readings and the remote probe for pin-type readings, both clearly labeled.

5. Impostazione

5.1. Installazione della batteria

1. Individuare il vano batterie sul retro del misuratore.
2. Aprire il coperchio del vano batterie.
3. Inserire una batteria da 9 V, rispettando la polarità corretta (+/-).
4. Chiudere saldamente il coperchio del vano batterie.

5.2. Calibrazione iniziale

The protective cover for the pin-type probe doubles as a calibration checker. To ensure accurate readings, perform a quick calibration:

1. Assicurarsi che il misuratore sia spento.
2. Place the pin-type probe (either attached or remote) into the designated slots on the protective cap.
3. Turn on the meter. The display should show a specific reference value, confirming calibration. Refer to the meter's display for the exact reference value.

6. Modalità operative

The MMD950 offers two primary measurement modes:

6.1. Pin-Type Measurement (%WME)

This mode uses the external pin-type probe to measure Wood Moisture Equivalent (%WME). It provides precise readings by directly inserting the pins into the material.

• Connect the remote pin-type probe to the meter's port.
• Press the Power/Mode button to select the %WME mode.
• Carefully insert the pins into the material to be tested. Ensure good contact.
• Leggi la percentuale di umiditàtage on the LCD display and observe the LED bar graph.

Figura 3: Un primo piano view of the MMD950 meter with the pin-style cable connected, allowing for precise %WME readings from a distance.

6.2. Pinless Measurement (REL)

This non-invasive mode uses the spherical sensor to detect relative moisture levels up to 4 inches deep without damaging the surface. It is ideal for quick scans and detecting moisture behind walls or under flooring.

• Ensure the remote pin-type probe is disconnected or not in use.
• Press the Power/Mode button to select the REL mode.
• Place the spherical sensor flat against the surface of the material.
• Move the meter slowly across the surface. The display will show relative moisture readings.
• Observe the LED bar graph and listen for the audible alarm for high moisture indications.

Figura 4: A hand holds the MMD950 meter with its spherical sensor against a light gray wall, illustrating its capability to detect moisture up to 4 inches deep without surface penetration.

7. Taking and Interpreting Measurements

7.1. Interpretazione delle letture

• Schermo LCD: Provides a numerical value of moisture content (in %WME or relative units).
• LED Bar Graph:
  • Verde: Basso contenuto di umidità.
  • Giallo: Contenuto di umidità medio.
  • Rosso: High moisture content, indicating potential water damage or mold risk.
• Allarme acustico: An audible alert will sound when high moisture levels are detected, particularly useful for quick scanning in pinless mode.

Figura 5: The MMD950 meter showing a high moisture reading on its display, highlighting its role in identifying moisture for mold prevention.

7.2. Funzione HOLD

Premere il tasto PRESA button to freeze the current reading on the LCD display. This is useful when taking measurements in hard-to-reach areas where the display cannot be easily viewed. Press the PRESA button again to release the reading.

7.3. Spegnimento automatico

The MMD950 features an auto power-off function to conserve battery life. The device will automatically turn off after 3, 5, or 10 minutes of inactivity. This duration can be adjusted in the meter's settings (refer to the full manual for detailed instructions on adjusting auto power-off settings).

8. Manutenzione

8.1. Pulizia

Wipe the meter with a soft, dry cloth. Do not use liquid cleaners or immerse the device in water.

8.2. Cura della sonda

Always keep the protective cap on the pin-type probe when not in use to prevent damage to the pins and accidental injury. Replacement pins are available if the original pins become dull or damaged.

Figura 6: The MMD950 meter with its removable pin attachment, which can be regularly calibrated using the protective cap.

8.3. Conservazione

Store the meter in its custom hard plastic carrying case in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.

9. Risoluzione Dei Problemi

If you encounter issues with your MMD950, refer to the following common problems and solutions:

10. Specifiche

11. Garanzia e supporto

11.1. Informazioni sulla garanzia

The General Tools MMD950 Moisture Meter is covered by a Garanzia sulle parti di 1 anni dalla data di acquisto. La presente garanzia copre i difetti di materiali e di fabbricazione in condizioni di normale utilizzo. Non copre i danni derivanti da uso improprio, incidenti, alterazioni, negligenza o riparazioni non autorizzate.

11.2. Assistenza clienti

For technical assistance, warranty claims, or to order replacement parts, please contact General Tools customer support. Refer to the contact information provided with your product packaging or visit the official General Tools websito.