JBL Su Stage Micro II Speaker System User Manual

1. Introduzione

Welcome to your JBL On Stage Micro II Speaker System. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your portable loudspeaker dock for iPod and iPhone.

2. Impostazione

2.1 Disimballaggio

Rimuovere con attenzione tutti i componenti dalla confezione. Assicurarsi di avere il JBL On Stage Micro II unit, the power supply, and the USB cable.

2.2 Alimentazione dell'unità

JBL On Stage Micro II can be powered in two ways:

Alimentazione CA

Connect the included power supply to the DC input on the unit and then to a standard wall outlet.

Potenza della batteria

Per l'uso portatile, inserire quattro batterie AAA nel vano batterie situato sul lato inferiore dell'unità. Assicurarsi della corretta polarità.

2.3 Collegamento dell'iPod/iPhone

JBL On Stage Micro II features a Universal Dock Connector compatible with most iPhone and iPod models.

1. Gently place your compatible iPod or iPhone model onto the dock connector.
2. Ensure the device is seated firmly. When connected to AC power, the system's Evercharge topography will begin charging your device even if the unit is switched off.

Image: The JBL On Stage Micro II Speaker System with an iPod device securely docked in the center connector.

2.4 Collegamento di dispositivi audio esterni

For devices without a Universal Dock Connector, such as an iPod shuffle or other MP3 players, use the 3.5mm auxiliary input.

• Connect one end of a 3.5mm audio cable (not included) to your external device's headphone jack.
• Connect the other end to the auxiliary input port on the JBL On Stage Micro II.

3. Funzionamento

3.1 Riproduzione di base

Once your iPod or iPhone is docked or an external device is connected via auxiliary input, power on the JBL On Stage Micro II. Your device should automatically begin playing or be ready for playback.

3.2 Utilizzo del telecomando

The included IR remote control provides full iPod/iPhone functionality from distances up to 20 feet straight ahead in front of the unit.

• Pulsante di accensione: Accende/spegne l'unità.
• Volume su/giù: Regola il volume dell'altoparlante.
• Navigazione della traccia: Passa alla traccia successiva o precedente.
• Riproduci/Pausa: Controlla la riproduzione.
• Navigazione nel menu: Allows browsing of iPod/iPhone menus.

3.3 Controllo del volume

Adjust the volume using the controls on the unit or the remote control. Note that the volume level will reset to a medium state each time the Micro II is turned off and on.

3.4 Syncing with iTunes

Connect the JBL On Stage Micro II to your computer using the provided USB cable. This allows you to sync and charge your docked iPod or iPhone with iTunes.

4. Manutenzione

4.1 Pulizia

To clean the unit, use a soft, dry cloth. Do not use liquid cleaners or aerosols, as these may damage the finish or internal components.

4.2 Sostituzione della batteria

If using battery power, replace all four AAA batteries when the unit's performance diminishes. Ensure the unit is powered off before replacing batteries.

5. Risoluzione Dei Problemi

5.1 Nessun suono

• Ensure the unit is powered on and connected to a power source (AC or fresh batteries).
• Check that your iPod/iPhone is properly docked or the auxiliary cable is securely connected.
• Verify the volume is not set to minimum on both the JBL On Stage Micro II and your connected device.
• If using an iPod/iPhone, try re-seating it in the dock connector.

5.2 Dispositivo non in carica

• Ensure the JBL On Stage Micro II is connected to AC power. Charging does not occur on battery power alone.
• Verify the iPod/iPhone is correctly seated in the dock connector.

5.3 Il telecomando non funziona

• Controllare la batteria del telecomando e sostituirla se necessario.
• Assicurarsi che non vi siano ostacoli tra il telecomando e il ricevitore IR dell'unità.
• The remote works best when pointed directly at the unit from up to 20 feet away.

5.4 Scarsa qualità del suono

• For docked devices, ensure the device's equalizer settings are not causing distortion (e.g., excessive bass boost).
• If using the auxiliary input, ensure the cable is fully inserted and not damaged.
• Try adjusting the volume on both the source device and the JBL On Stage Micro II.

6. Specifiche

7. Garanzia e supporto

Descrizione della garanzia: JBL On Stage Micro II Speaker System comes with a One Year Limited Warranty.

For warranty claims, technical support, or service inquiries, please contact JBL customer service. Refer to your product's packaging or the official JBL website for specific contact details and support resources.

Produttore: Harman Kardon