Introduzione
This manual provides essential instructions for the installation, operation, and maintenance of the SAMSUNG DA97-07549B Ice Maker Assembly. This genuine OEM part is designed to replace a faulty ice maker in compatible Samsung refrigerators, ensuring proper ice production. Please read this manual thoroughly before proceeding with installation or use.
Informazioni sulla sicurezza
- Scollegare l'alimentazione: Always disconnect the appliance from all utilities (unplug the refrigerator) before attempting any installation, repair, or maintenance. Failure to do so can result in electric shock or injury.
- Installazione professionale consigliata: If you are not comfortable with appliance repair, it is recommended to seek assistance from a qualified technician.
- Indossare dispositivi di protezione: Use appropriate personal protective equipment, such as gloves, during installation to prevent injury.
- Maneggiare con cura: The ice maker assembly contains delicate components. Handle it carefully to avoid damage.
Prodotto finitoview
The SAMSUNG DA97-07549B Ice Maker Assembly is a genuine Original Equipment Manufacturer (OEM) replacement part. It includes the ice mold and the control device, featuring a 12-wire electrical connection. This assembly is crucial for the automatic production and dispensing of ice in your Samsung refrigerator.
Figura 1: SAMSUNG DA97-07549B Ice Maker Assembly. This image shows the complete ice maker unit, including the ice mold, control device, and the yellow 12-wire electrical connector on the left side.
Istruzioni per l'installazione
The following steps outline the general procedure for replacing the ice maker assembly. Specific refrigerator models may vary, so consult your refrigerator's service manual if available.
- Prepararsi per l'installazione:
- Unplug the refrigerator from the electrical outlet to ensure no power is supplied to the unit.
- Chiudere l'afflusso d'acqua al frigorifero.
- Empty the ice bin and remove any existing ice.
- Access the Old Ice Maker:
- Locate the ice maker compartment, typically in the freezer section.
- Depending on your model, you may need to remove shelves or other components to gain access.
- Rimuovere la vecchia macchina per il ghiaccio:
- Carefully disconnect the electrical connector from the old ice maker. Note its orientation.
- Unscrew any mounting screws holding the ice maker in place. There are typically 2-3 screws.
- Gently slide or pull the old ice maker assembly out of its position.
- Installare la nuova macchina per il ghiaccio:
- Align the new SAMSUNG DA97-07549B Ice Maker Assembly with the mounting brackets.
- Secure the new ice maker with the mounting screws. Ensure it is firmly in place.
- Connect the 12-wire electrical connector to the new ice maker, ensuring a secure fit.
- Passaggi finali:
- Replace any shelves or components that were removed.
- Aprire l'alimentazione idrica del frigorifero.
- Ricollegare il frigorifero alla presa elettrica.
Istruzioni per l'uso
After installation, the ice maker will begin its cycle automatically. It may take several hours for the freezer compartment to reach the optimal temperature for ice production.
- Produzione iniziale di ghiaccio: The first batch of ice may take 12-24 hours to produce.
- Discard First Batches: It is recommended to discard the first 1-2 batches of ice to flush out any potential manufacturing residues from the water lines and the new ice maker.
- Pulsante di reset: Some models may have a reset button on the ice maker. If ice production does not start after several hours, locate and press the reset button (often a small blue button) for a few seconds.
- Sensore del livello del ghiaccio: The ice maker has a sensor that detects the ice level in the bin. When the bin is full, the ice maker will stop producing ice until the level drops.
Manutenzione
- Pulizia regolare: Periodically clean the ice bin and the exterior of the ice maker with a mild soap and water solution. Ensure the refrigerator is unplugged before cleaning.
- Filtro per l'acqua: Assicuratevi che il filtro dell'acqua del frigorifero venga sostituito regolarmente secondo le raccomandazioni del produttore, per preservare la qualità dell'acqua ed evitare l'accumulo di minerali nella macchina del ghiaccio.
- Ispezionare per perdite: Occasionally check for any signs of water leaks around the ice maker or water lines.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessuna produzione di ghiaccio |
|
|
| Produzione di ghiaccio lenta |
|
|
| Clicking sound from ice maker |
|
|
If these troubleshooting steps do not resolve the issue, contact Samsung customer support or a qualified appliance technician.
Specifiche
| Marca | SAMSUNG |
| Numero di modello | DA97-07549B |
| Dimensioni del prodotto | 6"P x 10"L x 4"A |
| Peso dell'articolo | 2 libbre |
| Cosatage | 140 watt |
| Connessione elettrica | 12 fili |
| Componenti inclusi | Assemblaggio del produttore di ghiaccio |
Garanzia e supporto
This SAMSUNG DA97-07549B Ice Maker Assembly is a genuine Samsung part. For specific warranty information regarding replacement parts, please refer to your original appliance's warranty documentation or contact Samsung customer support directly. Warranty coverage for replacement parts may be tied to the original appliance's purchase date and warranty period.
Per assistenza tecnica o ulteriori richieste, visita il supporto ufficiale Samsung websito o contattare il loro servizio clienti.
Supporto Samsung: www.samsung.com/us/support/