SYLVANIA 24082 FB40/D41/6 U-Shaped T12 Fluorescent Tube Light Bulb User Manual

Introduzione

This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your SYLVANIA 24082 FB40/D41/6 U-Shaped T12 Fluorescent Tube Light Bulb. Please read this manual thoroughly before use and retain it for future reference.

Informazioni sulla sicurezza

Always observe basic safety precautions when installing or replacing fluorescent light bulbs. Failure to do so may result in electric shock, fire, or personal injury.

AVVERTIMENTO: Turn off power at the circuit breaker or fuse box before installation or removal.
Do not use this bulb with dimmers unless specifically rated for fluorescent dimming systems.
Handle the bulb carefully to avoid breakage. Broken glass can cause injury.
Ensure the fixture is compatible with T12 U-shaped fluorescent bulbs with 6-inch leg spacing and a medium bi-pin base (G13).
Smaltire le lampadine fluorescenti secondo le normative locali, poiché contengono piccole quantità di mercurio.

Prodotto finitoview

The SYLVANIA 24082 is a 40-watt, U-shaped T12 fluorescent tube light bulb designed for indoor use. It features a cool white light with a color temperature of 4100 Kelvin and provides 3050 lumens of brightness. Its average lifetime is 18,000 hours.

SYLVANIA 24082 U-Shaped T12 Fluorescent Tube Light Bulb

Image: SYLVANIA 24082 FB40/D41/6 U-Shaped T12 Fluorescent Tube Light Bulb. This image shows the U-shaped glass tube with the bi-pin connectors at each end of the 'U' bend.

Configurazione e installazione

Spegni: Before beginning installation, ensure the power supply to the fixture is completely turned off at the circuit breaker or fuse box.
Rimuovere la vecchia lampadina (se applicabile): If replacing an existing bulb, carefully twist the old bulb to align the pins with the slots in the lampsupporto, quindi estrarlo delicatamente.
Ispezionare l'apparecchio: Controlla la lampholders for any damage or corrosion. Ensure they are clean and in good working condition.
Inserire la nuova lampadina: Align the two pins on each end of the SYLVANIA 24082 bulb with the slots in the lampholders. Gently push the bulb into the lampholders until the pins are fully seated, then twist the bulb slightly to lock it into place. Ensure the bulb is securely seated and the 6-inch leg spacing is accommodated by the fixture.
Accensione: Una volta installata saldamente la lampadina, ripristinare l'alimentazione all'apparecchio tramite l'interruttore automatico o la scatola dei fusibili.
Test: Accendere l'interruttore della luce per verificarne il corretto funzionamento.

Istruzioni per l'uso

This fluorescent tube operates with a compatible fluorescent ballast. Simply use the standard wall switch or fixture control to turn the light on and off. This bulb is designed for instant-start or rapid-start fluorescent fixtures.

Avvio iniziale: It may take a few seconds for the bulb to reach full brightness upon initial power-on, especially in colder environments.
Commutazione frequente: Frequent switching on and off can reduce the lifespan of fluorescent bulbs. It is recommended to leave the light on for extended periods when in use.

Manutenzione

Pulizia: Ensure power is off before cleaning. Gently wipe the bulb with a soft, dry, lint-free cloth. Do not use liquid cleaners directly on the bulb.
Sostituzione: Replace the bulb when it reaches the end of its useful life (indicated by flickering, dimming, or failure to ignite). Always replace with a bulb of the same type and wattage to ensure compatibility and optimal performance.
Ispezione degli apparecchi: Periodically inspect the fixture wiring and lampholders for signs of wear, damage, or loose connections.

Risoluzione dei problemi

Problema	Possibile causa	Soluzione
La lampadina non si accende.	Nessuna alimentazione al dispositivo. Lampadina non posizionata correttamente. Lampadina difettosa. Defective ballast or starter (if applicable).	Controllare l'interruttore automatico/il fusibile. Assicurarsi che la lampadina sia installata saldamente. Sostituire la lampadina con una sicuramente funzionante. Consult a qualified electrician to check ballast/starter.
La lampadina tremola o ronza.	Lampadina prossima alla fine del suo ciclo di vita. Collegamento allentato. Zavorra errata o difettosa. Cold ambient temperature.	Sostituire la lampadina. Assicurarsi che la lampadina sia saldamente inserita. Consultare un elettricista qualificato. Allow time for bulb to warm up.
Emissione luminosa ridotta.	Lampadina prossima alla fine del suo ciclo di vita. Dirty bulb or fixture.	Sostituire la lampadina. Clean bulb and fixture.

Specifiche

Numero di modello	24082
Tipo	U-Shaped T12 Fluorescent Tube
Cosatage	40 Watt
Temperatura del colore	4100 Kelvin (bianco freddo)
Luminosità	3050 lumen
Indice di resa cromatica (CRI)	70
Vita media	18,000 ore
Tipo di base	Medium Bi-pin (G13)
Distanza tra le gambe	6 pollici
Uso interno/esterno	Al chiuso

Informazioni sullo smaltimento

This product contains mercury and must be disposed of in accordance with local, state, and federal laws. Do not dispose of with regular household waste. For recycling options, please visit www.epa.gov/mercury or contact your local waste management authority.

Garanzia e supporto

For warranty information or technical support regarding your SYLVANIA product, please refer to the packaging or visit the official SYLVANIA websito. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

Produttore: Silvania

Marca: SYLVANIA

Contatto: Refer to official SYLVANIA channels for customer service.

SILVANIA 24082