SYLVANIA 58497 DYS/300 Halogen Bulb User Manual

Introduzione

This manual provides essential information for the safe and effective use of your SYLVANIA 58497 DYS/300 Halogen Bulb. Please read these instructions carefully before installation and operation. This bulb is designed for stage and studio applications, offering 300 watts of power at 120 volts with a GZ9.5 base and 3200K color temperature.

Informazioni importanti sulla sicurezza

WARNING: Risk of electric shock or burns. Always disconnect power before installation or replacement.

Ensure the power supply is turned off at the circuit breaker before handling the bulb.
Allow the bulb to cool completely before attempting to remove or replace it. Halogen bulbs operate at high temperatures.
Do not touch the glass part of the bulb with bare hands. Oils from your skin can create hot spots, leading to premature failure. Use a clean cloth or gloves when handling.
Ensure the bulb is securely seated in the fixture's socket.
Non superare il limite massimo di wattage valutazione del tuo apparecchio.
Smaltire le lampadine usate secondo le normative locali.

Configurazione e installazione

Follow these steps to properly install your SYLVANIA 58497 DYS/300 Halogen Bulb:

Spegni l'alimentazione: Locate the power switch or circuit breaker controlling the fixture and turn it off. Verify that the power is off before proceeding.
Image: A SYLVANIA 58497 DYS/300 Halogen Bulb, showing its T6 shape and GZ9.5 base. This image illustrates the product being installed.
Rimuovere la vecchia lampadina (se applicabile): If replacing an existing bulb, ensure it is cool to the touch. Carefully twist or pull the old bulb straight out from its GZ9.5 base socket.
Maniglia Nuova Lampadina: Remove the new SYLVANIA 58497 DYS/300 bulb from its packaging. Always handle the bulb with a clean cloth or gloves to avoid touching the glass envelope directly.
Inserire la nuova lampadina: Align the pins of the GZ9.5 base with the corresponding holes in the fixture's socket. Gently push the bulb straight into the socket until it is firmly seated. Do not force the bulb.
Ripristina alimentazione: Once the bulb is securely installed, turn the power back on at the switch or circuit breaker.

Istruzioni per l'uso

The SYLVANIA 58497 DYS/300 Halogen Bulb operates immediately upon receiving power. It is designed for use in compatible fixtures with a GZ9.5 base and 120V power supply.

Accensione: Activate the power switch connected to the fixture.
Disattivazione: Deactivate the power switch connected to the fixture.
dimming: If your fixture and electrical system support dimming, this bulb is compatible with most standard incandescent dimmers. Ensure the dimmer is rated for the bulb's wattage.

Manutenzione

Minimal maintenance is required for this halogen bulb. Follow these guidelines to ensure optimal performance and longevity:

Pulizia: If the bulb's glass envelope becomes dusty or dirty, turn off the power and allow the bulb to cool completely. Gently wipe the glass with a clean, dry, lint-free cloth. Do not use liquid cleaners.
Sostituzione: Replace the bulb when it reaches the end of its operational life (approximately 100 hours) or if it fails prematurely. Always follow the installation steps when replacing.
Ispezione: Ispezionare periodicamente la lampadina e l'apparecchio per verificare la presenza di eventuali segni di danni o collegamenti allentati.

Risoluzione dei problemi

If your SYLVANIA 58497 DYS/300 Halogen Bulb is not functioning as expected, consider the following common issues:

Problema	Possibile causa	Soluzione
La lampadina non si accende.	Nessuna alimentazione al dispositivo. Lampadina non posizionata correttamente. La lampadina ha raggiunto la fine del suo ciclo di vita. Apparecchio o cablaggio difettoso.	Controllare l'interruttore di alimentazione e l'interruttore automatico. Turn off power, then re-seat the bulb firmly. Sostituire la lampadina con una nuova. Consult a qualified electrician if fixture or wiring is suspected.
La lampadina sfarfalla.	Collegamento allentato. Dimmer incompatibile. Voltage fluttuazioni.	Togliere la corrente e riposizionare la lampadina. Ensure dimmer is compatible and rated for halogen bulbs. Consultare un elettricista se voltagI problemi persistono.
La lampadina si brucia rapidamente.	Toccare il vetro a mani nude durante l'installazione. Vibrazioni eccessive. Over-volumetage.	Utilizzare sempre un panno o dei guanti durante la manipolazione. Assicurarsi che il dispositivo di fissaggio sia stabile e non soggetto a movimenti eccessivi. Verifica corretto voltage fornitura all'apparecchio.

Specifiche

Detailed technical specifications for the SYLVANIA 58497 DYS/300 Halogen Bulb:

Marca: SYLVANIA
Numero modello: 58497 (DYS/300)
Tipo di luce: Alogeno
Cosatage: 300 Watt
Voltage: 120 Volt
Dimensioni della forma della lampadina: T6
Tipo di base: GZ9.5
Temperatura del colore: 3200 Kelvin (bianco caldo)
Lumen iniziali: 7500 lumen
Rated Life Hours: 100 ore
Utilizzo interno/esterno: Interno, Esterno
Usi specifici: Stage and Studio, Table Lamp, Piano Lamp
Metodo di controllo: Push Button (via fixture switch)
Tecnologia di connettività: Lampadina normale
Codice GTIN: 046135584978

Informazioni sulla garanzia

SYLVANIA products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official SYLVANIA website. Typically, warranty coverage addresses manufacturing defects under normal operating conditions.

Assistenza clienti

If you have any questions, require technical assistance, or need to report an issue, please contact SYLVANIA customer support through their official channels. Contact information can usually be found on the product packaging or the SYLVANIA brand websito.

Supporto online: www.sylvania.com

SILVANIA 58497