Prodotto finitoview
The Schellenberg 50400 Maxi Recessed Belt Winder is a robust and durable component designed for manual operation of roller shutters. Constructed from galvanized steel, this unit is intended for flush installation within a suitable wall box. It is compatible with the Schellenberg Maxi roller shutter system, accommodating a belt width of 23 mm.
The winder's drum capacity supports roller shutters up to a height of 2.30 meters, allowing for a maximum belt length of approximately 5.6 meters. For ease of installation, the winder features a pre-tensioned spring and an adjustable installation depth, ranging from 115 mm to 135 mm. Please note that a cover plate is not included with this product and must be purchased separately to complete the installation and match your interior design.
Figure 1: The Schellenberg 50400 Maxi Recessed Belt Winder, shown with a roller shutter belt. This unit is designed for flush installation within a wall.
Configurazione e installazione
Before beginning installation, ensure you have the necessary tools and a suitable wall box with a hole spacing of 185 mm. The spring of the belt winder is pre-tensioned to simplify belt attachment.
-
Preparare l'apertura nel muro: Ensure the wall opening for the recessed winder is clean and correctly sized for the unit. The required hole spacing is 185 mm.
Figure 2: A person's hands guide the recessed belt winder into the prepared wall opening, with the roller shutter belt already attached.
- Attach the Roller Shutter Belt: Feed the roller shutter belt (23 mm width) through the winder mechanism. The pre-tensioned spring facilitates this step. Ensure the belt is securely attached to the winder drum.
- Inserire l'avvolgitore: Carefully insert the belt winder into the wall box. The installation depth is adjustable between 115 mm and 135 mm, allowing for flexibility to match your wall structure.
- Fissare l'avvolgitore: Fasten the winder securely within the wall box using appropriate screws. Ensure it is flush with the wall surface.
-
Install the Cover Plate (Sold Separately): Once the winder is secured, attach the desired cover plate. These are available separately in various designs and with appropriate hole spacing to complement your living environment.
Figure 3: The recessed belt winder after installation, featuring a separately purchased white cover plate for a clean finish. The roller shutter belt extends neatly from the unit.
-
Finish with Screw Plugs: If your cover plate uses screw plugs, insert them to conceal the screw heads for a neat appearance.
Figure 4: A hand is shown inserting a small white screw plug to secure the cover plate of the belt winder, ensuring a flush and stable installation.
Figure 5: A technical drawing illustrating the key dimensions of the Schellenberg 50400 Maxi Recessed Belt Winder, including overall length (215 mm), hole spacing (185 mm), width (50 mm), and depth (128 mm).
Istruzioni per l'uso
Operating the Schellenberg 50400 Maxi Recessed Belt Winder is straightforward:
- To raise the roller shutter, pull the belt downwards smoothly and evenly.
- To lower the roller shutter, release the belt slowly and allow the winder mechanism to retract the belt, guiding the shutter downwards.
- Avoid sudden jerks or excessive force on the belt, as this can damage the winder mechanism or the roller shutter itself.
Manutenzione
The Schellenberg 50400 Maxi Recessed Belt Winder is designed for long-lasting performance with minimal maintenance. Follow these guidelines:
- Pulizia: Pulire periodicamente le parti visibili dell'avvolgitore e della piastra di copertura con un panno morbido e asciutto.amp panno. Evitare detergenti abrasivi o solventi.
- Ispezione della cinghia: Regularly check the roller shutter belt for signs of wear, fraying, or damage. A worn belt should be replaced promptly to ensure safe and smooth operation.
- Controllo del meccanismo: If you notice any unusual resistance or noise during operation, inspect the winder mechanism. Do not attempt to disassemble the spring mechanism unless you are qualified, as it is under tension.
Risoluzione dei problemi
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Belt does not retract fully or is loose. | Spring tension is insufficient or belt is too long for the shutter height. | Ensure the belt length is appropriate for your roller shutter. If the spring tension is the issue, professional assistance may be required for adjustment or replacement. |
| Belt is difficult to pull or retracts slowly. | Friction in the winder mechanism or belt guide, or the roller shutter itself is stiff. | Check the belt path for obstructions. Ensure the belt guide is clean. Inspect the roller shutter for issues. |
| Winder does not fit into the wall box. | Incorrect wall box dimensions or hole spacing. | Verify the wall box dimensions and hole spacing (185 mm) against the product specifications. The installation depth is adjustable (115-135 mm). |
Specifiche
- Numero modello: 50400
- Marca: Schellenberg
- Tipo di prodotto: Recessed Belt Winder
- Materiale: Acciaio galvanizzato
- Colore: zincato
- Distanza tra i fori: 185 millimetri
- Compatible Roller Shutter System: Massimo
- Larghezza cinghia compatibile: 23 millimetri
- Max. Roller Shutter Height: 2.30 metri
- Max. Belt Length Capacity: 5.6 metri
- Adjustable Installation Depth: 115 - 135 millimetro
- Dimensioni del prodotto (L x P x A): Dimensioni: 21.5 x 12.8 x 5 cm
- Peso: Circa 9.07 grammi
- Componenti inclusi: 1 x pre-tensioned recessed winder
- Paese di origine: Germania
Figure 6: Product packaging for the Schellenberg 50400 Maxi Recessed Belt Winder, highlighting key features and compatibility.
Garanzia e supporto
Schellenberg products are known for their quality and durability. For any questions regarding your Schellenberg 50400 Maxi Recessed Belt Winder, including selection, installation, or replacement, please refer to the official Schellenberg website or contact their customer support. Detailed contact information can typically be found on the product packaging or the manufacturer's official websito.
While specific warranty details are not provided in this manual, Schellenberg stands by its products. Please retain your proof of purchase for any warranty claims.