Behringer DJX400

Introduzione

This instruction manual provides comprehensive guidance for the Behringer DJX400 2-channel DJ Mixer. It covers essential information regarding product setup, operational procedures, maintenance, and troubleshooting. Familiarize yourself with this manual to ensure optimal performance and longevity of your DJX400 mixer.

Davanti view of the Behringer DJX400 DJ Mixer, showing its two channels, faders, EQ controls, crossfader, and master section.

Impostare

Follow these steps to properly set up your DJX400 mixer.

1. Disimballaggio e ispezione

• Estrarre con cautela il mixer dalla confezione.
• Ispezionare l'unità per verificare eventuali segni di danni che potrebbero essersi verificati durante il trasporto. In caso di danni, contattare immediatamente il rivenditore.
• Ensure all accessories, including the power cable, are present.

2. Collegamento delle sorgenti audio

The DJX400 features two dual-input stereo channels. Each channel can accept either PHONO (turntable) or LINE (CD player, media player) level signals.

• PHONO Inputs (RCA): Connect turntables to the PHONO inputs. Ensure your turntables have a ground wire connected to the mixer's ground terminal (if available) to reduce hum.
• LINE Inputs (RCA): Connect CD players, media players, or other line-level audio devices to the LINE inputs.
• MIC Input (1/4" TRS): Connect a microphone to the 1/4" TRS input on the front panel.

3. Collegamento delle uscite audio

• MASTER Output (RCA): Connect this output to your main PA system or amplifier. This is your primary audio output.
• BOOTH Output (RCA): Connect this output to a monitor speaker system in your DJ booth. This allows you to hear your mix independently of the main output.
• Uscita REC (RCA): Connect this output to a recording device (e.g., a digital recorder, computer audio interface) to capture your mix.
• HEADPHONE Output (1/4" TRS): Connect your headphones to this jack for monitoring.

4. Collegamento elettrico

• Assicurarsi che l'interruttore di alimentazione del mixer sia in posizione OFF.
• Connect the provided power cable to the mixer's power inlet and then to a suitable AC power outlet.
• Power on your audio sources and amplifiers before turning on the mixer.
• Finally, switch the DJX400 power ON.

Operativo

This section details the functions of the DJX400's controls and how to operate the mixer.

1. Controlli del canale

Each of the two stereo channels features the following controls:

• INPUT SELECT Switch: Toggles between PHONO and LINE inputs for the respective channel.
• Ottenere il controllo: Adjusts the input sensitivity for the channel. Set this so the channel's peak LED occasionally flashes, but does not stay lit.
• 3-Band KILL EQ: Provides -32 dB attenuation for HIGH, MID, and LOW frequencies. Use these to sculpt the sound of each track.
• FADER CANALE: Controls the volume level of the individual channel.
• Pulsante PFL (ascolto pre-fader): Routes the channel's audio to the headphone output for monitoring before it reaches the main mix.

2. Crossfader

The DJX400 features a super-smooth dual-rail "Ultraglide" crossfader designed for up to 500,000 life cycles.

• CROSSFADER: Blends between Channel 1 and Channel 2. Moving it to the left emphasizes Channel 1, and to the right emphasizes Channel 2.
• CROSSFADER CURVE Control: Adjusts the response curve of the crossfader. A sharp curve is ideal for scratching, while a smooth curve is better for blending.

3. Sezione Master

• LIVELLO MAESTRO: Controls the overall output volume of the mixer to the main PA system.
• LIVELLO CABINA: Adjusts the volume of the BOOTH output for your monitor speakers.
• LIVELLO DEL MICROFONO: Controlla il volume dell'ingresso del microfono.
• XPQ 3D SURROUND: Activates and adjusts the XPQ 3D surround effect, which widens the stereo image and adds transparency to the sound. Turn the knob to increase the effect.

4. Headphone Section

• LIVELLO CUFFIE: Regola il volume dell'uscita cuffie.
• PFL/MAIN MIX Control: Blends between the PFL (pre-fader listen) signal and the main mix in your headphones.
• SPLIT/STEREO Switch: In SPLIT mode, the PFL signal is sent to one ear and the main mix to the other. In STEREO mode, both signals are mixed in stereo.

5. BPM Counter

The intelligent dual auto-BPM counter displays the beats per minute for both channels, aiding in beatmatching.

• The display shows the BPM for the active channel or the channel selected for PFL.
• Use the BPM display to visually match the tempo of two tracks before crossfading.

Manutenzione

Proper maintenance ensures the longevity and reliable operation of your DJX400 mixer.

Pulizia

• Always disconnect the mixer from power before cleaning.
• Per pulire le superfici esterne, utilizzare un panno morbido, asciutto e privo di lanugine.
• Per lo sporco ostinato, una leggera damp è possibile utilizzare un panno imbevuto di sapone neutro, seguito da un panno asciutto.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish and internal components.
• Keep faders and knobs free from dust and debris. Compressed air can be used carefully to clear dust from crevices.

Magazzinaggio

• Quando non in uso, conservare il mixer in un luogo fresco e asciutto, lontano dalla luce solare diretta e da temperature estreme.
• Protect the mixer from dust by covering it with a dust cover.

Risoluzione dei problemi

This section addresses common issues you might encounter with your DJX400 mixer.

Specifiche

Key technical specifications for the Behringer DJX400 DJ Mixer:

Garanzia e supporto

I prodotti Behringer sono progettati per garantire affidabilità e prestazioni. Per informazioni dettagliate sulla garanzia e sul supporto tecnico, consultare il sito ufficiale Behringer. webo contattare il rivenditore autorizzato locale. Conservare la ricevuta d'acquisto come prova d'acquisto per eventuali reclami in garanzia.

• Supporto online: Visit the official Behringer website for FAQs, software downloads, and support resources.
• Centri Servizi: Individua i centri di assistenza autorizzati per riparazioni e manutenzione.