Seymour Duncan 11102-09-B
Seymour Duncan Stag Mag Humbucker – Nero Manuale utente
Modello: 11102-09-B
Introduzione
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Seymour Duncan Stag Mag Humbucker pickup. Please read this manual thoroughly before installation to ensure proper function and longevity of your product.
Image: The Seymour Duncan Stag Mag Humbucker pickup in black, showcasing its unique staggered pole pieces and the brand's logo. This pickup is designed for electric guitars.
Prodotto finitoview
The Seymour Duncan SH-3 Stag Mag is a unique dual-coil humbucker pickup designed to offer the clarity and responsiveness of a single-coil pickup while retaining the punch and richness characteristic of a humbucker. Its distinctive staggered pole pieces contribute to its bright, articulate tone.
Caratteristiche principali:
- Unique Staggered-Pole Design: Combines single-coil clarity with humbucker fullness for a bold, dynamic tone.
- Ampia gamma di frequenze: Delivers tight lows, scooped mids, and brilliant highs, suitable for various musical styles, including those with drop tunings.
- High Output with Character: Capable of pushing amplifiers into overdrive while maintaining definition.
- Crafted in California: Hand-built in Seymour Duncan’s Santa Barbara Custom Shop, ensuring quality and reliability.
Configurazione e installazione
Proper installation is crucial for optimal performance. It is recommended that installation be performed by a qualified guitar technician if you are not familiar with guitar electronics.
Strumenti e materiali necessari:
- Saldatore e stagno
- Spellafili
- Cacciaviti piccoli (a croce e a taglio)
- Multimeter (for checking continuity and resistance)
- Shielded Wire (if extending leads)
- Potentiometers (e.g., 500k Ohm for humbuckers, 250k Ohm for single-coil mode)
- Capacitors (e.g., 0.022µF for tone control)
Fasi di installazione:
- Preparare la chitarra: Ensure the guitar is unplugged. Remove the old pickup and clean the pickup cavity.
- Schema elettrico: Refer to the official Seymour Duncan wiring diagrams for the SH-3 Stag Mag. These diagrams are available on the Seymour Duncan websito. Note that wiring colors can sometimes vary, so it is advisable to use a multimeter to confirm wire functions (hot, ground, coil split) before soldering.
- Connessioni a saldare: Carefully solder the pickup wires to the appropriate points on your guitar's potentiometers, switch, and output jack, following the chosen wiring diagram (e.g., standard humbucker, coil split, series/parallel).
- Montare il pick-up: Securely mount the Stag Mag pickup into the guitar's pickup cavity using the provided screws and springs. Adjust the pickup height to your preference.
- Funzionalità di prova: Before reassembling the guitar, plug it into an amplifier and test all pickup positions and controls to ensure proper operation and sound.
Nota importante: One user reported a discrepancy in wire colors for hot and ground on a specific batch of pickups. Always verify wire functions with a multimeter if you encounter unexpected behavior during installation. For the Stag Mag, the black wire is typically hot and green is ground, but this can vary. Check for connectivity to the back plate of the pickup to confirm ground.
Operating the Pickup
The Seymour Duncan Stag Mag is designed to be versatile, offering distinct tonal characteristics depending on its wiring configuration and your playing style.
Humbucker Mode:
In full humbucker mode, the Stag Mag delivers a rich, full sound with excellent output. It provides the punch and sustain expected from a humbucker while maintaining a unique clarity due to its staggered pole pieces. This mode is ideal for rock, blues, and any genre requiring a powerful, articulate tone.
Single-Coil Mode (Coil Split):
When wired for coil splitting (typically via a push/pull potentiometer or a mini-toggle switch), the Stag Mag can emulate the bright, chimey tones of a single-coil pickup. This mode is particularly effective for clean tones, funk, country, and sounds reminiscent of a Stratocaster bridge pickup. The staggered pole pieces enhance this single-coil character.
Regolazione dell'altezza del raccoglitore:
Adjusting the pickup height significantly impacts tone and output. Experiment with different heights to find your preferred balance:
- Closer to Strings: Increases output, sustain, and bass response. Can lead to magnetic pull on strings, affecting intonation and sustain if too close.
- Further from Strings: Decreases output, provides a more open, less compressed sound, and allows strings to vibrate more freely.
A good starting point is to have the top of the pole pieces approximately 1/8 inch (3mm) from the bottom of the strings when fretted at the last fret.
Manutenzione
The Seymour Duncan Stag Mag pickup is designed for durability and requires minimal maintenance.
- Pulizia: Periodically wipe the pickup cover and pole pieces with a soft, dry, lint-free cloth to remove dust and grime. Avoid using abrasive cleaners or solvents, as these can damage the finish.
- Ispezione: Regularly inspect the wiring connections for any signs of wear, corrosion, or loose solder joints. Ensure mounting screws are snug but not overtightened.
- Fattori ambientali: Protect your guitar and pickup from extreme temperature fluctuations and high humidity, which can affect electronic components and wood.
Risoluzione dei problemi
Se riscontri problemi con il tuo Stag Mag pickup, consider the following common troubleshooting steps:
| Problema | Possibile causa | Soluzione |
|---|---|---|
| Nessun suono / Suono debole | Loose or broken wire connection, faulty potentiometer, incorrect wiring, pickup too far from strings. | Check all solder joints and wiring against the diagram. Test potentiometers with a multimeter. Adjust pickup height. |
| Eccessivo ronzio o rumore | Poor grounding, unshielded wires, external electromagnetic interference. | Ensure all ground connections are solid. Verify proper shielding in the guitar cavity. Move away from noisy electrical devices. |
| Inconsistent Tone / Dropouts | Intermittent connection, faulty switch or jack. | Inspect output jack and selector switch for loose connections or wear. |
| Unusual Tonal Characteristics (e.g., too thin, too muddy) | Incorrect wiring for desired mode (e.g., coil split instead of humbucker), incorrect potentiometer values, pickup height. | Double-check wiring diagram. Ensure correct potentiometer values (e.g., 500k for humbuckers). Adjust pickup height. |
If problems persist after attempting these solutions, it is advisable to consult a professional guitar technician.
Specifiche
- Nome modello: Stag Rivista
- Numero modello: 11102-09-B
- Tipo: Dual-coil Humbucker with Staggered Pole Pieces
- Colore: Nero
- Materiale: Metallo
- Peso dell'articolo: 0.96 once (circa 27.2 grammi)
- Dimensioni del prodotto (L x P x A): 7.09 x 3.54 x 1.57 pollici (circa 18.0 x 9.0 x 4.0 cm)
- Produttore: Seymour Duncan
- Codice UPC: 800315001019
- Prima data disponibile: 8 agosto 2010
Garanzia e supporto
Seymour Duncan products are known for their quality and reliability. For specific warranty information and technical support, please refer to the official Seymour Duncan websito o contattare direttamente il servizio clienti.
Ufficiale Websito: www.seymourduncan.com
Contatta l'assistenza: Fare riferimento alla sezione "Supporto" o "Contattaci" sul sito ufficiale website for the most current contact information and FAQs.