Jensen JS800 8-Inch 100W Subwoofer User Manual

Benvenuto

Thank you for choosing the Jensen JS800 8-Inch 100W Subwoofer. This manual provides essential information for the proper setup, operation, and maintenance of your new audio equipment. Please read this manual thoroughly before using the subwoofer to ensure optimal performance and safety.

Conservare questo manuale per riferimento futuro.

Importanti istruzioni di sicurezza

To reduce the risk of electric shock, fire, or damage to the unit, always follow these basic safety precautions:

• Fonte di energia: Connect the subwoofer only to the type of power source indicated on the marking label.
• Ventilazione: Assicurare un'adeguata ventilazione. Non ostruire le aperture di ventilazione. Installare secondo le istruzioni del produttore.
• Calore: Non installare vicino a fonti di calore come radiatori, bocchette di riscaldamento, stufe o altri apparecchi (inclusi amplificatori) che producono calore.
• Acqua e umidità: Non utilizzare questo apparecchio vicino all'acqua. Non esporlo a gocce o schizzi.
• Pulizia: Pulire solo con un panno asciutto. Scollegare l'unità dalla presa a muro prima di pulirla.
• Ingresso di oggetti e liquidi: Non spingere mai oggetti di alcun tipo in questo prodotto attraverso le aperture poiché potrebbero entrare in contatto con liquidi pericolosi.tage punti o parti in cortocircuito che potrebbero causare incendi o scosse elettriche.
• Manutenzione: Non tentare di riparare questo prodotto da soli poiché l'apertura o la rimozione delle coperture potrebbe esporvi a pericolitage o altri pericoli. Affidare tutti gli interventi di assistenza a personale qualificato.
• Protezione del cavo di alimentazione: Proteggere il cavo di alimentazione per evitare che venga calpestato o schiacciato, in particolare in corrispondenza delle spine, delle prese di corrente e del punto in cui esce dall'apparecchio.

Prodotto finitoview

The Jensen JS800 is a powerful 8-inch 100W powered subwoofer designed to enhance the low-frequency response of your home audio or home theater system. Its sealed acoustic suspension enclosure delivers tight and dynamic bass.

Immagine: lato frontale view of the Jensen JS800 8-inch 100W Subwoofer. The unit is a black, cube-shaped enclosure with a textured wood-grain finish. It stands on four short, black cylindrical feet. The front panel is a flat surface, and a small "JENSEN" logo is visible on the lower right side.

Configurazione e installazione

Disimballaggio

Carefully remove the subwoofer from its packaging. Check for any signs of damage during transit. Retain the packaging materials for future use or if the unit needs to be transported.

Verificare che tutti i componenti siano presenti:

• Jensen JS800 Subwoofer Unit
• Cavo di alimentazione
• Questo manuale utente

Posizionamento

The placement of your subwoofer significantly affects its performance. Consider the following:

• Acustica della stanza: Bass response can vary greatly depending on room size, shape, and furnishings. Experiment with different locations.
• Posizionamento ad angolo: Placing the subwoofer in a corner often maximizes bass output, but can sometimes lead to "boomy" or exaggerated bass.
• Posizionamento della parete: Posizionandolo lungo una parete, lontano dagli angoli, si può ottenere una risposta dei bassi più bilanciata.
• Posizione di ascolto: The ideal placement often involves finding a spot where the bass sounds balanced from your primary listening position.
• Proximity to Main Speakers: For seamless integration, try placing the subwoofer relatively close to your main front speakers.

Connessioni

The JS800 offers both speaker-level and line-level inputs for versatile connection options.

1. Spegni: Assicurati che amplifier/receiver and the subwoofer are turned off before making any connections.
2. Line-Level Connection (Recommended for Receivers with Subwoofer Output):
   • Connect an RCA cable from the "SUBWOOFER OUT" or "LFE OUT" jack on your receiver/amplifier to the "LINE IN" (L/R) input on the JS800. If your receiver has a single LFE output, you can connect it to either the left or right "LINE IN" on the subwoofer.
3. Speaker-Level Connection (For Receivers without Subwoofer Output):
   • Collega i cavi dei diffusori dal tuo amplifier's main left and right speaker outputs to the "SPEAKER LEVEL INPUTS" on the JS800.
   • Then, connect speaker wires from the "SPEAKER LEVEL OUTPUTS" on the JS800 to your main left and right speakers. Ensure correct polarity (+ to + and - to -).
4. Collegamento elettrico: Una volta effettuati tutti i collegamenti audio, collegare il cavo di alimentazione del subwoofer a una presa CA adatta.

Operazione

Accensione/spegnimento

The JS800 typically has a power switch on the rear panel. Turn it to the "ON" position to power on the subwoofer. Some models may feature an auto-on/standby mode that activates the subwoofer when an audio signal is detected and puts it into standby when no signal is present for a period.

Regolazione dei controlli

The JS800 features controls on its rear panel to fine-tune its performance with your system:

• Controllo volume/guadagno: Regola il livello di uscita complessivo del subwoofer. Inizia con un'impostazione bassa e aumentala gradualmente fino a quando i bassi non si fondono perfettamente con gli altoparlanti principali.
• Controllo della frequenza crossover: This control determines the highest frequency the subwoofer will reproduce. Set it to blend with the low-frequency capabilities of your main speakers. A common starting point is 80 Hz, but adjust based on your speakers and room acoustics.
• Interruttore di fase (0°/180°): This switch helps to ensure that the subwoofer's output is in phase with your main speakers. Experiment with both settings to find the one that produces the strongest and most coherent bass at your listening position.

Mancia: Play a familiar piece of music or movie scene with strong bass and adjust the controls until the bass sounds natural and integrated, not overpowering or disconnected from the rest of the sound.

Manutenzione e cura

Proper care will ensure the longevity and performance of your Jensen JS800 Subwoofer:

• Pulizia: Use a soft, dry cloth to clean the exterior surfaces. Do not use liquid cleaners, aerosols, or abrasive chemicals, as they may damage the finish.
• Ventilazione: Ensure that the ventilation openings are not blocked by dust or debris. Periodically check and gently clean if necessary.
• Posizionamento: Evitare di posizionare il subwoofer alla luce diretta del sole o vicino a fonti di calore o umidità eccessivi.
• Energia: Unplug the subwoofer from the power outlet if it will not be used for an extended period.

Risoluzione dei problemi

If you experience issues with your Jensen JS800 Subwoofer, refer to the following table for common problems and solutions:

Specifiche tecniche

Garanzia e supporto

Jensen products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Jensen websito.

For technical support, troubleshooting assistance, or service inquiries, please contact Jensen customer support through their official channels. Have your model number (JS800) and purchase information ready when contacting support.