iskydance V1 Plus RT1 Single Color LED Controller Kit
Model No.: V1 + RT1
channels constant voltage/Touch color wheel/Step-less dimming/Wireless remote, 30m distance
Feature
- Remote control or connected with an external push switch to achieve on/off and dimming functions
- Ultra-sensitive brightness adjustment touch wheel
- Smooth dimming and switching without any flickering
- 4 scene memory
- Auto-transmitting function: The Controller automatically transmits a signal to another controller with a 30m control distance
- Light on/off fade time 3s selectable
Technical Parameters
| LED Receiver’s Input and Output | |
| Input voltage | 5-36VDC |
| Input current | 8.5A |
| Output voltage | 5-36VDC |
| Output current | 1CH,8A |
| Output power | 40W/96W/192W/288W (5V/12V/24V/36V) |
| Output type | Constant voltage |
| Dimming data | |
| Dimming level | 4096 levels |
| Dimming range | 0 -100% |
| Dimming curve | Logarithmic |
| PWM Frequency | 2000Hz |
| Warranty and Protection | |
| Warranty | 5 years |
| Protection | Reverse Polarity |
| LED Remote’s Input and Output | |
| Output signal | RF(2.4GHz) |
| Working voltage | 3VDC(AAAx2) |
| Working current | ＜5mA |
| Standby current | ＜10μA |
| Standby time | 2 year |
| Remote distance | 30m |
| Safety and EMC | |
| EMC standard (EMC) | ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 |
| Safety standard(LVD) | EN 62368-1:2020+A11:2020 |
| Radio Equipment(RED) | ETSI EN 300 328 V2.2.2 |
| Certification | CE, EMC, LVD, RED |
| Environment | |
| Operation temperature | Ta: -30 OC ~ +55 OC |
| Case temperature (Max.Tc | c: +85OC |
| IP rating | IP20 |
Mechanical Structures and Installations
Wiring Diagram
Remote function
Match Remote Control (two match ways)
The end user can choose the suitable match/delete methods. Two options are offered for selection:
Use the controller’s Match key
Match:
Short-press-press press match key, immediately press the on/off key of the remote.
Delete:
Switch off the power, then switch on the power, repeat. Immediately short-press-press press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Use Power Restart
Match:
Switch off the power, then switch on the power, repeat.
Immediately short-press-press press on/off key 3 times on the remote.
The light blinks 3 times means the match is successful.
Delete:
Press and hold the match key for 5 seconds to delete all matches. The light blinks 5 times means all matched remotes were deleted.
Light on/off fade time
Long press match key 5s, then short press match key 3 times, the light on/off time will be set to 3s, the indicator light blink 3 times.
Long press match key 10s, restore factory default parameter, the light on/off time also restore to 0.5s.
Dimming Curve
Malfunctions analysis & troubleshooting
| Malfunctions | Causes | Troubleshooting |
| No light | 1. No power. 2. Wrong connection or insecure. | 1. Check the power. 2. Check the connection. |
| Uneven intensity between front and rear, with a voltage drop | 1. The output cable is too long. 2. Wire diameter is too small. 3. Overload beyond power supply capability. 4. Overload beyond controller capability. | 1. Reduce cable or loop supply. 2. Change wider wire. 3. Replace the higher power supply. 4. Add power repeater. |
| No response from the remote | 1. The battery has no power. 2. Beyond controllable distance. 3. The controller did not match the remote. | 1. Replace the battery. 2. Reduce remote distance. 3. Re-match the remote. |
Safety information
- The product shall be installed and serviced by a qualified person.
- The product is non-waterproof. Please avoid the sun and rain.
- Good heat dissipation will prolong the working life of the controller. Please ensure good ventilation.
- Please check if the output voltage of any power supplies used comply with the working voltage of the product.
- Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages to the LED lights.
- If a fault occurs, please return the product to your supplier. Do not attempt to fix this product by yourself.
User Manual Ver 1.0.4 V1+ RT1 Single Color LED Controller Kit
Documents / Resources
 | iskydance V1 Plus RT1 Single Color LED Controller Kit [pdf] Owner's Manual V1 Plus RT1 Single Color LED Controller Kit, V1 Plus RT1, Single Color LED Controller Kit, LED Controller Kit, Controller Kit |
