A compact, black metal enclosure housing the SES-AX1001 4K HDMI Audio Embedder & Extractor. The front panel features ports labeled 'FW', 'Audio In', 'HDMI In', and 'Power DC/5V'. The top surface displays 'SESCOM', 'The Audio Source.', and 'SES-AX1001'. The rear panel, visible from the side, shows ports labeled 'HDMI Out', 'SPDIF', and 'Audio'.
Features
- Supports audio embedding and extracting
- SPDIF 5.1 and Analog Audio PCM 2.0 Outputs
- 2 DIP Switches for audio embedding or extraction configuration
- Audio Uncompressed PCM, Dolby, DTS Supported
- Supports Resolutions up to 4K2K 60Hz
- Compliance: HDCP 2.2 / 1.4
- Bandwidth: up to 18Gbps
- CEC Supported
Specifications
| Parameter | Value |
|---|---|
| Operating Temperature | -5 to 40°C (23 to 104°F) |
| Range Operating Humidity | 5 to 90%RH (No Condensation) |
| Range Input Video Signal | 0.5-1.0 Volts P-P |
| Input DDC Signal | 5 volts p-p(TTL) |
| Supported Video Format | 4Kx2K/1080P/1080i/720P/576P/576i/480P/480i, 3D video |
| Support Video Color Format | xv-YCC/deep color 36bit |
| Support Audio Format | PCM, DTS-HD Master Audio, Dolby true-HD etc. |
| Data transfer speed rate | 18Gbps (Maximum) |
| Compliance | HDCP2.2/1.4 |
| Power consumption | 1.5W (Maximum) |
| Dimension (L×W×H) | 104.4 x 89 x 28.3mm (3.7 x 4.3 x 1.3in) |
| Net Weight | 155g / 5.4oz |
Item Includes
The package includes a 5V DC Power Supply with a barrel connector.
Connecting and Operating
Follow these steps to connect and operate the unit:
- Connect your desired HDMI signal source into the HDMI input of the unit.
- Connect the HDMI display device (such as: HDTV or Projector) into the HDMI output of the unit.
- Connect an Optical audio cable or RCA audio cable to an Amplifier.
- Connect the DC 5V power supply to the unit.
Application Diagrams
Embedder Diagram Description
This diagram illustrates the audio embedding function. An HDMI source device connects to the unit's 'HDMI In' port. A microphone connects to the 'Audio In' port. The unit's HDMI output connects to a '4K TV'. The diagram implies that audio from the microphone is embedded into the HDMI signal.
Extractor Diagram Description
This diagram illustrates the audio extraction function. An HDMI source device connects to the unit's 'HDMI In' port. The unit's HDMI output connects to a '4K TV'. Additionally, audio is extracted from the HDMI signal and outputted via 'SPDIF' or 'Audio' (RCA) ports to a 'Sound Bar'.
Panel Descriptions
Front Panel
The front panel features the following ports and indicators:
- 1. FW: For factory use only.
- 2. Audio Indicator: Indicates audio status.
- 3. Audio Input: Connect an audio source here (e.g., microphone).
- 4. HDMI Input: Connect your HDMI source device here.
- 5. Power Indicator: Shows if the unit is powered on.
- 6. Power Supply Input: Connect the included DC 5V power adapter here.
Back Panel
The back panel features output ports and configuration switches:
- 1. Audio DIP Switch: A 2-position switch (0/1) used for configuring audio embedding or extraction modes.
- 2. HDMI Output Indicator: Indicates the status of the HDMI output.
- 3. HDMI Output: Connect your display device (TV, projector) here.
- 4. SPDIF Audio Output: Optical audio output for connecting to amplifiers or soundbars.
- 5. Audio Output Indicator: Indicates the status of the analog audio output.
- 6. Audio Output: Analog audio output (RCA) for connecting to amplifiers or soundbars.
Audio Configuration Options
The DIP switch on the back panel controls the audio configuration:
- 00: Audio Embedded
- 01: PCM2.0 Audio Extraction
- 10: 5.1 Audio Extraction
- 11: Bypass
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner, or benzine to clean this unit.
Product Service
1) Damage requiring service: The unit should be serviced by qualified service personnel if:
- (a) The DC power supply cord or AC adapter has been damaged;
- (b) Objects or liquids have gotten into the unit;
- (c) The unit has been exposed to rain;
- (d) The unit does not operate normally or exhibits a marked change in performance;
- (e) The unit has been dropped or the cabinet damaged.
2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.
3) Replacement parts: When parts need replacing, ensure the service uses parts specified by the manufacturer or parts that have the same characteristics as the original parts. Unauthorized substitutes may result in fire, electric shock, or other hazards.
4) Safety check: After repairs or service, ask the service to perform safety checks to confirm that the unit is in proper working condition.
Warranty
1 Year
Company Information
SESCOM, The Audio Source. PO Box 720 | Mount Marion, NY 12456 | (845) 246-1915 | www.sescom.com. 100% Employee Owned Division of Tower Products Incorporated.
Audio Cables, Audio Converters & Adapters
