Wave Armored Trooper Votoms Snapping Turtle ST Ver. 1/35 Scale Model Kit

1. Inngangur

Þakka þér fyrir kaupinasing the Wave Armored Trooper Votoms Snapping Turtle ST Ver. 1/35 Scale Model Kit. This manual provides essential information for the assembly, operation, and maintenance of your model kit. Please read these instructions carefully before beginning assembly to ensure a smooth and enjoyable building experience.

2. Vöru lokiðview

The Snapping Turtle ST Version is a 1/35 scale plastic model kit from the Armored Trooper Votoms series. This kit features a snap-fit design, eliminating the need for adhesives during assembly. It incorporates polycaps at each joint, allowing for a fully movable and poseable finished model. The ST version emphasizes ease of assembly while accurately reproducing the distinctive appearance of the Blue AT.

Mynd 2.1: Framan view of the assembled Snapping Turtle ST model kit.

3. Öryggisupplýsingar

• This product is a plastic model kit intended for users aged 15 and above.
• Small parts are included. Keep out of reach of small children to prevent choking hazards.
• Assembly may involve sharp tools. Exercise caution to avoid injury.
• Always work in a well-ventilated area if using paints or glues (though not included, these may be used by the builder).

4. Innihald pakka

The following items are included in your Wave Armored Trooper Votoms Snapping Turtle ST Ver. 1/35 Scale Model Kit:

• Plastic assembly kit parts (color-coded)
• Merkingarlímmiðar
• Notkunarhandbók (þetta skjal)

Items NOT included (required for assembly and finishing):

• Plastic model nippers/cutters
• Áhugamál hnífur
• Files or sanding sticks
• Plastic model cement (adhesives are not required for snap-fit assembly but may be used for added durability)
• Paints and brushes (for painting the model)

5. Uppsetning og samsetning

Follow the detailed diagrams and instructions provided in the included assembly guide. The kit is designed for snap-fit assembly, meaning parts can be connected without glue. However, for a more secure fit, plastic model cement can be used on non-articulated parts.

1. Undirbúningur: Carefully remove all parts from the runners using nippers. Trim any excess plastic (nubs) with a hobby knife or file for a clean finish.
2. Samsetning líkamans: Begin by assembling the torso, head, and backpack components. Pay attention to the orientation of each piece.
3. Armsamsetning: Assemble the shoulder, bicep, forearm, and hand parts. Insert polycaps into the designated joint areas to ensure articulation.
4. Fótasamsetning: Assemble the thigh, knee, lower leg, and foot parts. Ensure polycaps are correctly placed for full range of motion.
5. Vopnasamsetning: Assemble the included weapon. The weapon can be held by the model's hand or attached to specific hardpoints.
6. Lokaþing: Connect all assembled sections (arms, legs, head, weapon) to the main body.
7. Decals/Stickers: Apply the included marking stickers according to the guide for added detail.

Figure 5.1: Snapping Turtle ST with weapon attached to arm.

Figure 5.2: Detail of the model's primary weapon.

Figure 5.3: Detail of the leg mechanism, featuring the 'Swampy Crag' gimmick.

6. Notkun (staða og sýning)

The Snapping Turtle ST model features fully articulated joints thanks to its polycap construction. This allows for a wide range of dynamic poses. Carefully manipulate the joints to achieve desired stances. Avoid excessive force to prevent damage to the plastic parts or polycaps.

• Hreyfing í liðum: Gently bend and rotate joints to pose the model.
• Vopnastelling: The weapon can be held in the model's hand or attached to designated hardpoints on the arm.
• Stöðugleiki: Ensure the model is balanced when posing to prevent it from falling.

7. Viðhald

Til að tryggja endingu og útlit líkansins skaltu fylgja þessum viðhaldsleiðbeiningum:

• Þrif: Þurrkið reglulega af líkaninu með mjúkum bursta eða þrýstilofti til að koma í veg fyrir rykuppsöfnun. Forðist að nota hörð efni eða slípiefni.
• Geymsla: Store the model in a cool, dry place away from direct sunlight and extreme temperatures, which can cause plastic degradation or discoloration.
• Meðhöndlun: Handle the model by its sturdy parts, avoiding delicate antennas or small protrusions.

8. Bilanagreining

While this model kit is designed for ease of assembly, you may encounter minor issues. Here are some common troubleshooting tips:

• Hlutir passa ekki: Ensure parts are correctly oriented. If a part is too tight, gently sand down the peg or hole slightly. Do not force parts together.
• Lausar liðir: If a joint feels too loose, a thin layer of clear nail polish or hobby cement applied to the polycap or peg and allowed to dry can increase friction.
• Brotnir hlutar: Small breaks can often be repaired with plastic model cement. For larger breaks, consider using epoxy glue or contacting the manufacturer for replacement parts if available.

9. Tæknilýsing

10. Ábyrgð og stuðningur

Specific warranty information for this product is not provided in the general product details. For any inquiries regarding missing parts, defects, or technical support, please contact the manufacturer, Wave, directly through their official customer service channels. Please retain your proof of purchase.