Intesis INKNXMID001I000 Commercial and VRF Systems to KNX Interface
Product Usage Instructions
Installation Conditions
This gateway is designed to be mounted inside an enclosure. If the unit is mounted outside an enclosure, precautions should always be taken to prevent electrostatic discharge to the unit. When working inside an enclosure, typical anti-static precautions should always be followed before touching the unit.
Compatibility
This interface is compatible with Midea Commercial and VRF systems.
Features and benefits
- ETS configura on
The interface is configured using the ETS standard configuration tool software. - Smooth KNX thermostat integration
KNX thermostats are allowed to control the AC unit via the thermostat’s temperature sensor. - AC unit control by both remote controller and KNX
The AC unit can be simultaneously controlled by the manufacturer’s remote controller and KNX. - Compatible with all KNX thermostats in the market
All the required DPT objects to be compatible with all KNX thermostats in the market are available. - Total unit control and monitoring from KNX
Through internal variables, running hours counter (for maintenance purposes), and error indica on. - Compact dimensions, allowing inside installation
The interface can be quickly installed inside the AC unit thanks to its reduced dimensions.
Specifications
| General | |
| Net Width (mm) | 71 |
| Net Height (mm) | 71 |
| Net Depth (mm) | 27 |
| Net Weight (g) | 80 |
| Packed Width (mm) | 12 |
| Packed Height (mm) | 6 |
| Packed Depth (mm) | 9 |
| Packed Weight (g) | 100 |
| Operating Temperature °C Min | 0 |
| Operating Temperature °C Max | 60 |
| Storage Temperature °C Min | -40 |
| Storage Temperature °C Max | 85 |
| Power Consumption (W) | 5.8 |
| Input Voltage (V) | 29 VDC |
| Power Connector | 2-pole |
| Configuration | ETS |
| Capacity | 1 Indoor unit. |
| Installation Conditions | This gateway is designed to be mounted inside an enclosure. If the unit is mounted outside an enclosure, precautions should always be taken to prevent electrostatic discharge to the unit. When working inside an enclosure (e.g., making adjustments, setting switches, etc.), typical anti-static precautions should always be followed before touching the unit. |
| AC Model Compatibility | Midea Commercial & VRF systems |
General
- Housing Materials Plastic
- Warranty (years) 3 years
- Packaging Material Cardboard
Identification and Status
- Product ID INKNXMID001I000
- Country of Origin Spain
- HS Code 8517620000
- Export Control Classification Number (ECCN) EAR99
Physical Features
- Connectors / Input / Output KNX, HVAC port.
- LED Indicators KNX
Certifications and Standards
- ETIM Classification EC001604
- WEEE Category IT and telecommunications equipment
Use Case
Integra on example.
FAQ
- Q: Can this interface be used with any KNX thermostat?
A: Yes, it is compatible with all KNX thermostats in the market. - Q: How is the interface configured?
A: The interface is configured using the ETS standard configuration tool software.
Documents / Resources
 | Intesis INKNXMID001I000 Commercial and VRF Systems to KNX Interface [pdf] Owner's Manual INKNXMID001I000, INKNXMID001I000 Commercial and VRF Systems to KNX Interface, INKNXMID001I000, Commercial and VRF Systems to KNX Interface, VRF Systems to KNX Interface, to KNX Interface, KNX Interface |