intel BE200 WiFi Card

Product Information

Specifications:

• Model: Wi-Fi 7 For Intel BE200
• Tri-band: 2.4Ghz / 5Ghz / 6Ghz
• Max Speed: Up to 5800Mbps (2×2, 320 MHz, 4K QAM)
• Bluetooth Version: Bluetooth 5.4
• Interface: NGFF(M.2)
• Support Technology: MU-MIMO, OFDMA
• Supported Operating Systems: Only works with
  Win10/11 64bit

Accessories

Product Usage Instructions

How to install the Network card desktop kit.

Installation display

Description

• Model: Wi-Fi 7 For Intel BE200
• Tri-band: 2.4Ghz / 5Ghz / 6Ghz (160Mhz-Up to 2400Mbps,320Mhz-Up to 5.8 Gbps)
• Max speed: Speed up to 5800Mbps (2×2, 320 MHz, 4K QAM)
• Bluetooth Version: Bluetooth 5.4
• Interface: NGFF(M.2)
• Support technology: MU-MIMO,OFDMA
• Supported Operating Systems: Only work with Win10/11 64bit

Please do remember closed the PC then install the WiFi card, otherwise there might be short circuit.

Note: Not support AMD processor PC

Compatiable:

1. It can used on
   Samsung/Dell/Sony/ACER/ISUS/MSI/Clevo/ Terransforce/ Hasee etc.
2. Not support AMD/IBM/ Thinkpad/ lenovo /hp laptop Desktop.

Installation Tips

1. Please plug the Network Adapter in the Interface:M.2 NVME
2. you can Check Show hidden, then Disable all the previous drivers, then reinstall the driver and test again When you need the Driver ,check: https://www.fenvi.com/drive.html?keyword=BE200NGW-wifi-7-be200/downloads.html
3. https://www.intel.com/content/www/us/en/products/sku/230078/intel
   Then restart the PC
4. When the Bluetooth don’t work ,please use the tape to stick pin of wireless network card(please see the picture as shown, Be careful not to paste onto the back), to abtain the bluetooth.
5. When the WiFi don’t work ,please use the tape to stick pin of wireless network card(please see the picture as shown, Be careful not to paste onto the back), to abtain the WiFi
6. When you can not get the WiFi card signal
   1. Check if the network adapter in the host is securely inserted. If there is any looseness, please reinsert it securely.
   2. Check if the gold finger of the network card is in good contact with the socket on the computer host (if there are any foreign objects, gently wipe to remove them), and then plug the network adapter back into the socket.

Frequently Asked Questions

What precaution should I take before installing the WiFi card?

Please remember to close the PC completely before installing the WiFi card to avoid any potential short circuits.

Documents / Resources

intel BE200 WiFi Card [pdf] Owner's Manual BE200, BE200 WiFi Card, WiFi Card, Card

References

• User Manual