FX4100 Cellular Router Wavemaker
Specifications:
- Product Name: Inseego WavemakerTM FX4100 Cellular Router
- Wireless Connectivity: Wi-Fi
- Ports: 2 x 1 GbE WAN/LAN Ethernet ports, SIM slot, USB C data
and power port - External Antenna Support: Yes, frequency range of 0.6-6
GHz
Product Usage Instructions:
Setting up your router:
- Step one: Power on the router
Connect the router to a power source using a USB-powered hub for
setup. - Step two: Identify a location for your
router
Find an optimal location based on the provided suggestions and use
the FX4100 LEDs or the Inseego MobileTM app for assistance. - Step three: Connecting wireless devices
Wirelessly connect Wi-Fi-capable devices by following the
instructions on the device display.
Monitoring and managing your router:
- Device Display: Use the device display to view
information, alerts, and perform actions like pairing with a mesh
node or checking for firmware updates. - Restoring Factory Settings: Perform a factory
reset if needed, but note that all settings changes will be
lost.
FAQ:
- Q: Where can I find the passwords for Wi-Fi and Admin
web UI? - A: The passwords are printed on the label of your router. It is
recommended to change them before use. - Q: How do I configure the Ethernet ports?
- A: You can configure either port to be WAN or LAN in the Admin
web UI under Settings > Advanced > WAN or with Inseego
Connect: WAN Settings. - Q: How do I activate the external antenna
ports? - A: To activate the external antenna ports, turn the switch to
EXT.ANT.ON.
Inseego WavemakerTM
FX4100 Cellular Router
Quick Start Guide
Setting up your router
Step one: power on the router
· Plug in the router. You can use the provided AC adapter, a USB-powered hub, or a USB-powered delivery device.
NOTE: Using a USB-powered hub for setup allows you to find the best location without unplugging the router.
· When the device status LED is solid blue (5G) or green (LTE), the router is on. It may take up to three minutes for the router to fully power on.
Step two: identify a location for your router
To find the best location, you can use the FX4100 LEDs and display, or you can use the Inseego MobileTM app. Location suggestions:
– Ideally on an exterior wall closest to the nearest cell – Near a window but not in direct sunlight – On or above ground level (not in a basement) – Clear from obstructions and interference from other electronics – Outside of cabinets or locations that can get excessively hot
· Adjust the location of the router until the cellular status LED is blue (5 bars) or cyan (4 bars), and the device display shows four or five bars.
NOTE: You can now pair X700 Mesh Wi-Fi. Go to go.inseego.com/fx4100 for guidance.
FX4100 front
Device status LED Cellular status LED Wi-Fi status LED
Display button Device display
Device LEDs
LED Device status
Color Blue Green Yellow
White
Red
Cellular status
Blue Cyan Green Yellow White Red
Blue
Wi-Fi status
Green White Red Off
Operation Solid Solid
Solid Blinking Solid Blinking Solid Blinking Solid Solid Solid Solid Blinking Solid Blinking Solid Blinking Solid
Blinking Solid Off
Meaning Device on 5G Device on LTE
Software update is available Software update is downloading/installing Device on, Ethernet WAN Device booting up Device error Software update failed Great signal (5 bars) Good signal (4 bars) Fair signal (3 bars) Poor signal (2 bars) Searching for signal Very poor signal (1 bar) No signal/no network Wi-Fi on, mesh Mesh pairing mode Wi-Fi on, no mesh
Wi-Fi initiating/rebooting Wi-Fi error Wi-Fi off
Step three: connecting wireless devices
To wirelessly connect a Wi-Fi-capable device (such as a PC, laptop, tablet, or phone) for the first time:
· Ensure the Wi-Fi status LED is green (or blue if you have mesh).
· On the device you want to connect, open the Wi-Fi settings or application and in the displayed list of available networks, find the Primary Wi-Fi network name printed on the bottom of your router.
· Click Connect or otherwise select the network name. · When prompted, enter the Primary Wi-Fi password printed
on the bottom of the router. You can change the default name or password to something easier to remember (see “Monitoring and managing your router”). Your Wi-Ficapable device is now connected to the internet.
Using the device display
The device display provides device information, alerts and allows you to perform actions, like pair with a mesh node or check for a firmware update. Navigate through the display with the display button:
· Short press (<1 second) – cycles through the display options. · Long press (>3 seconds) – initiates an action or accesses/exits
a submenu.
The menu icon on the left shows you where you are in the main menu.
The scroll icon on the bottom of a submenu shows you where you are in the submenu.
An X appears over the signal strength icon when no network is found.
An X appears on the data arrows icon when there is no data traffic.
An antenna icon appears when the external antenna switch is on.
Monitoring and managing your router
You can use the following options to monitor and manage your router: Admin web UI – Access the web UI at http://192.168.1.1 or http://inseego.local for a full set of device management features. Inseego Connect – Configure settings, monitor status, and update the firmware on your device remotely from the cloud. All T-Mobile owned Inseego FX devices come with the option of purchasing the Inseego Connect Add-on. Please work with your Account team to order the Inseego Connect Add-on, which provides Manager access. Inseego Mobile app – You can use the same mobile app you used to install your FX4100 to perform basic device monitoring and management.
NOTE: Passwords for Wi-Fi and the Admin web UI are printed on the label of your router. We strongly recommend that you change your password before using your router.
Restoring factory settings
NOTE: When performing a factory reset, any changes made to settings will be lost.
To restore factory settings, follow these steps: · Verify that your router is powered on. · Press the reset button on the back of the router for five seconds. The device status LED blinks white, then turns red. When it is green or blue, your router is ready.
FX4100 back
SIM slot
2 x 1 GbE WAN/LAN Ethernet ports*
External antenna switch External antenna ports**
USB C data and power port Reset button
* Ethernet ports are labeled with their default setting (WAN or LAN). You can configure either port to be WAN or LAN in the Admin web UI: Settings > Advanced > WAN, or with Inseego Connect: WAN Settings.
** When enabled, each external port supports the full cellular frequency range of 0.6-6 GHz. To activate the external antenna ports, turn the switch to EXT.ANT.ON.
Inseego Mobile app requirements
Smartphone or device on iOS 13 or above, or Android 9.0 or above.
System requirements
Any device with Wi-Fi capability and an internet browser. The FX4100 5G Cellular Router is compatible with all major operating systems and the latest versions of browsers.
Support and more
IMPORTANT: The Inseego Wavemaker FX4100 5G Cellular Router is intended for use in a fixed location. Use at a location other than the eligible address provided at activation is not permitted. The router cannot be unlocked for use on other networks. 5G Not all devices, signals, or uses are compatible; check device specs. See T-Mobile.com, MetrobyT-Mobile.com, or AssuranceWireless.com for 5G coverage, access and network management details. Approved firmware versions This device will only operate with firmware versions that have been approved for use by your wireless carrier and the device manufacturer. If unauthorized firmware is placed on the device it will not function. Information about safeguarding devices We encourage customers to take appropriate measures to secure their devices and invite them to take advantage of the features available on this device to help secure it from theft and/or other unauthorized access and use. This device has a locking function (e.g., userdefined codes or patterns) that can serve as a first line of defense against unauthorized use or access to stored information. Preloaded security applications that allow customers to track or locate misplaced devices can be found on several devices. Lost or stolen devices should be immediately reported to your wireless carrier so that proper measures can be taken to protect accounts. For additional information, visit your wireless carrier’s Privacy Policy. More information To access a user guide, go to go.inseego.com/fx4100.
WARNING: DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH ACTION MAY VOID THE WARRANTY. THE ROUTER IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR TUNING IS REQUIRED. CONTACT INSEEGO TECHNICAL SUPPORT FOR INFORMATION ABOUT SERVICING YOUR WIRELESS COMMUNICATION DEVICE.
© 2025 Inseego Corp. All Rights Reserved.
PN 14965442 R2
Documents / Resources
 | inseego FX4100 Cellular Router Wavemaker [pdf] User Guide FX4100 Cellular Router Wavemaker, FX4100, Cellular Router Wavemaker, Router Wavemaker, Wavemaker |