RC21x
Installation
Option1
Option2
installation
 |  |  |
| Remove the plastic tab. | Open the Inner App and make sure your Inner Bridge is connected. | Press “+” and “Add Device”. |
 |  |  |
| Scan the QR-code on the remote. | Press “Next step’ to start searching for the device(s). | Follow the further instructions in the app. |
INstallation without Inner bridge
For direct use with smart lights (without Inner Bridge) or with a third party bridge please visit: www.innr.com/service
Button overview 
• Short press: On / Off
Factory reset 
Press and hold the reset button for 3 seconds.
Important safety instructions
- For indoor use only.
- Do not disassemble the product: if any part is damaged, the product should not be used.
- Do not immerse in water.
- For cleaning, use a damp cloth, never a strong cleaning
- Keep these instructions for future use.
Declaration of Conformity
Hereby, Inner Lighting BV declares that the radio equipment types RC 210 are in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet addresswww.innr.com/en/downloads Zigbee Frequency: 2.4 GHz (2400 – 2483.5 MHz) – RF power max 10 dBm
INNR IM RC 210-X253-Pantone 276C
Documents / Resources
 | innr RC21x Smart Lighting [pdf] Installation Guide RC21x, Smart Lighting, RC21x Smart Lighting |
