infobitav 4K60 4×1 KVM Switcher

Specifications

• HDMI Compliance: HDMI 2.0
• HDCP Compliance: HDCP 2.3
• Video Bandwidth: 18Gbps
• Audio Latency: No Latency
• Video Resolution: Up to 4K@60Hz, 2K@60Hz/144Hz
• IR Level: 5Vp-p
• IR Frequency: Fixed frequency 38KHz
• Color Space: RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
• Color Depth HDR: 8/10/12bit HDR, HDR10, HDR10+, Dolby Vision, HLG
• CEC: Support
• Audio Formats: HDMI IN/OUT: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DTS:X, DSD L/R OUT: PCM 2.0CH

Product Usage Instructions

Installation
Follow these steps to install the iSwitch 401K 4K60 4×1 KVM Switcher:

1. Place the switcher in a suitable location near your computers.
2. Connect the HDMI cables from your computers to the input ports on the switcher.
3. Connect the HDMI cable from the output port on the switcher to your monitor.
4. Connect the USB cables for keyboard and mouse to the corresponding ports on the switcher.
5. Connect the power supply to the switcher and plug it into a power outlet.

Operation
To operate the KVM switcher:

• Use the front panel buttons, keyboard/mouse hotkeys, IR remote control, or RS-232 commands to switch between computers.
• You can hot plug or disconnect devices at any time without interrupting operation.
• The integrated USB 3.0 ports allow sharing of USB peripherals between computers.

Maintenance
To ensure optimal performance:

• Avoid exposing the switcher to moisture or extreme temperatures.
• Clean the switcher regularly with a soft, dry cloth.

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

• www.infobitav.com
• info@infobitav.com

Introduction

This is a 4×1 KVM Switcher with hotkey switching. It supports resolutions up to 4K@60Hz 4:4:4 8bit and can also transmit USB 3.0 signal up to 5Gbps for KVM function. The switcher features virtual interaction function, so that it can automatically wake up the connected PC that is in standby mode, which can reduce the switching time. It also supports direct switching through buttons on the front panel, IR remote, and hotkey through keyboard/mouse connected to the special USB port. It provides a wide compatibility choice for different operating systems, such as Windows, Mac OS and Linux, no driver required and simple plug and play.

Features

• HDCP 2.3 compliant
• Support Ultra-wide Screen, resolution up to 4K@60Hz, 2K@60Hz/144Hz as specified in HDMI 2.1
• HDR, HDR10, HDR10+, Dolby Vision, HLG pass-through
• Using only 1 set of keyboard, mouse and monitor to control 4 computers
• Support video fast switching, and keyboard/mouse seamless switching
• Each input port has an EDID emulator to provide the correct information for the PC
• Support hot plug, disconnect or connect devices to the KVM at any time
• Switching via front panel buttons, keyboard/mouse hotkeys, IR remote control, and RS-232 commands
• Support auto switching
• Advanced hardware/software design and production ensure zero latency
• The integrated USB 3.0 ports allow you to share USB peripherals like printer, scanner, webcam and hard disk between computers with data transfer rate up to 5Gbp/s
• Compact design for easy and flexible installation

Package Contents

1. 1 x 4K60 4×1 KVM Switcher
2. 1 x IR Remote
3. 1 x 3pin-3.81mm Phoenix Connector (male)
4. 1 x Fixed Frequency 38KHz IR Receiver Cable (1.5 meters)
5. 4 x USB Cable (USB 3.0, AM to BM, 1.8 meters)
6. 4 x HDMI Cable (male to male, 1.5 meters)
7. 2 x Mounting Ears
8. 4 x Machine Screws (KM3*4)
9. 1 x 12V/1A Multinational Locking Power Supply
10. 1 x User Manual

Specifications

Operation Controls and Functions

Front Panel

Rear Panel

IR Pin Definition
IR Receiver pin’s definition is as below:

IR Remote

1. Power on or Standby: Press this button to power on the switcher or set it to standby mode.
2. Auto: Press this button to enable/disable the auto switching function.
3. 1/2/3/4: Press 1/2/3/4 button to select the HDMI input port 1/2/3/4 as the input channel, and the corresponding channel LED on the front panel will light in green.

ANTICLOCKWISE: Press this button to cyclically switch the input channel.

Hotkey Switch Function

The Hotkey switch on the front panel allows you to enable/disable the hotkey switch function.

1. When Hotkey switch to OFF mode, the hotkey switch function is disabled, and two USB 3.0 ports (with hotkey mode) support USB 3.2 Gen 1 device.
2. When Hotkey switch to ON mode, the hotkey switch function is enabled, and two USB 3.0 ports (with hotkey mode) only support USB 1.1 mouse and keyboard, which can be used for hotkey switching.

K eyboard & Mouse Hotkey Function

When the hotkey mode is enabled, you can use keyboard and mouse hot keys to operate and control the product.

1. Keyboard hotkeys are as follows:
2. Mouse hotkeys are as following:
   • Double-Click Middle-Right (Double-click the mouse scroll wheel, and then click the right button): Switch to next input
   • Double-Click Middle-Left (Double-click the mouse scroll wheel, and then click the left button): Switch to previous input

ASCII Commands

The product also supports ASCII commands control. Connect the RS-232 port of the product to a PC with a 3-pin phoenix connector cable and an RS-232 to USB cable. The connection method is as follows.

• Then, open a Serial Command tool on PC to send ASCII commands to control the product.
• The ASCII commands list about the product is shown as below.

Application Example

The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

FAQ

Q: Is surge protection necessary for this product?
A: Yes, surge protection is recommended to safeguard the sensitive electrical components and extend the lifespan of the equipment.

Q: How many computers can be connected to this KVM switcher?
A: The iSwitch 401K supports up to 4 computers for seamless switching using a single set of keyboard, mouse, and monitor.

Documents / Resources

infobitav 4K60 4x1 KVM Switcher [pdf] User Manual 4K60 4x1 KVM Switcher, 4K60, 4x1 KVM Switcher, KVM Switcher, Switcher

References

• User Manual