inateck P6-AI Barcode Scanner
You can download Inateck Scanner from Google Play and the App Store. Alternatively, you can scan the QR code below for download. You can configure the scanner according to your desired settings on the app.
Product Illustration
- Laser Window
- Trigger
- USB Port
- Power Switch
- Buzzer
- LED1
- LED2
- Shockproof Cover
Product Specification
Package List
- P6-A|*1/
- USB Cable*1
- Instruction Manual*1
- 2.4GHz Wireless Adapter*1
How to power on/off
ON Power on P6-Al by toggling the switch from OFF to ON. Short press the trigger to emit a red laser beam and scan barcodes.
OFF Power off P6-Al by toggling the switch from ON to OFF.
A Battery Safety Warning
This product contains a built-in rechargeable lithium battery. Please observe the following safety precautions: do not dismantle, hit, crush, or expose the battery to fire. If the battery experiences severe swelling, discontinue use immediately. Avoid placing the battery in high-temperature environments, and do not use it if it has been immersed in water. During transportation, do not mix the battery with metallic objects.
FCC Note
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the Users, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements. This equipment complies with FCC’s RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located in conjunction with any other antenna or transmitter.
EU Declaration of Conformity
Inateck Co., Ltd. hereby declares that this device complies with the Directive 2014/53/EU. A copy of the Declaration of Conformity can be accessed from
https://www.inateck.de/pages/inateck-eurocompliance.
Documents / Resources
 | inateck P6-AI Barcode Scanner [pdf] User Guide 2A2T9-P6-AI, 2A2T9P6AI, P6-AI Barcode Scanner, P6-AI, Barcode Scanner, Scanner |
